The Effects of Different Heat Treatment Regimes on the Wear Properties of Fe-Based Composite Materials

Powder Metallurgy and Metal Ceramics - In this study, different heat treatment regimes, such as sintering, sintering with low-pressure cementation, and only low-pressure cementation were applied to...     

Processing and Properties of Textured Potassium Sodium Niobate [K,Na]NbO3 Ceramic Ribbons by Alginate Gelation Method

Random and <001> textured potassium sodium niobate – [K,Na]NbO₃ (KNN) ceramics with 1 mole% CuO sintering aid were fabricated in ribbon form through a combination of novel alginate gelation process and templated grain growth methods using platelike sodium niobate ‐ NaNbO₃ (NN) template particles. The platelike NN template particles were prepared by a two‐step molten salt synthesis method. Ribbons were drawn from alginate‐based slurries without or with 10 wt% NN template particles using 50 mm long slit nozzle with a rectangular orifice of 10 mm × 1 mm. Development of crystallographic texture as a result of varying sintering time and temperature was evaluated through the calculation of the degree of orientation as measured by the Lotgering factor (?₍₀₀₁₎) and an ?₍₀₀₁₎ of 0.81 was achieved. The electrical properties of textured ribbons were evaluated with polarization and strain versus electric field measurements.     

The Effect of Ti Addition and Aging on Wear Behavior of AlMgSi Alloys Reinforced with In Situ Al3Ti Particles

The purpose of this study is to investigate the effects of Ti addition (1 and 2% Ti) and aging heat treatment on the mechanical and wear characteristics of Al-12Si-20Mg cast alloys. In preliminary studies conducted to determine the aging parameters, cast alloys were kept at 550 °C for 2 h before being quenched into water and aged at 200 °C for five different periods (3, 6, 9, 12, and 15 h). As the specimen aged for 12 h had the highest hardness value, all the specimens were aged at 200 °C for 12 h. The microstructures of the as-cast and aged specimens were analyzed using an optical microscope and a scanning electron microscope. The hardness of the investigated alloys was measured by micro-hardness test. The wear tests were carried out using the pin-on-disk model wear test apparatus, and the results were evaluated according to weight loss. According to the wear test results, the wear behavior of the investigated alloys changed depending on the aging heat treatment applied and the load. While Ti addition and the aging heat treatment applied reduce the weight loss at low loads (5 N), they increase the weight loss at higher loads (10 and 20 N).     

Evaluation of plate loading tests on some rock formations for assessing the ground bearing capacity

A significant proportion of the cost of winning minerals or aggregates in an open cast mine is related to the mass haul. The quality of the haul roads is an important factor in the efficiency and length of turn-round time. The paper reports a study into the use of plate loadings tests as a quick and easy means of establishing a preliminary bearing capacity. Various relationships have been obtained between bearing capacity and the results of field and laboratory tests. Good performance indices (r, RMSE, VAF) indicate they can be used for an initial assessment of the bearing capacity of rock units ranging from weak to strong. In addition, classes for bearing capacity of rock units have been suggested based on field observations and measurements.     

Oriented immobilized anti-LDL antibody carrying poly(hydroxyethyl methacrylate) cryogel for cholesterol removal from human plasma

Low density lipoprotein (LDL) cholesterol is a major ingredient of the plaque that collects in the coronary arteries and causes coronary heart diseases. Among the methods used for the extracorporeal elimination of LDL from intravasal volume, immunoaffinity technique using anti-LDL antibody as a ligand offers superior selectivity and specificity. Proper orientation of the immobilized antibody is the main issue in immunoaffinity techniques. In this study, anti-human β-lipoprotein antibody (anti-LDL antibody) molecules were immobilized and oriented through protein A onto poly(2-hydroxyethyl methacrylate) (PHEMA) cryogel in order to remove LDL from hypercholesterolemic human plasma. PHEMA cryogel was prepared by free radical polymerization initiated with N,N,N′,N′-tetramethylene diamine (TEMED). PHEMA cryogel with a swelling degree of 8.89 g H₂O/g and 67% macro-porosity was characterized by swelling studies, scanning electron microscope (SEM) and blood compatibility tests. All the clotting times were increased when compared with control plasma. The maximum immobilized anti-LDL antibody amount was 63.2 mg/g in the case of random antibody immobilization and 19.6 mg/g in the case of oriented antibody immobilization (protein A loading was 57.0 mg/g). Random and oriented anti-LDL antibody immobilized PHEMA cryogels adsorbed 111 and 129 mg LDL/g cryogel from hypercholesterolemic human plasma, respectively. Up to 80% of the adsorbed LDL was desorbed. The adsorption–desorption cycle was repeated 6 times using the same cryogel. There was no significant loss of LDL adsorption capacity.     

Spectroelectrochemical study of N‐ethyl‐carbazole in the presence of acrylamide

Polymerization of N‐ethylcarbazole (NECz) in the presence of acrylamide (AAm) has been investigated by in situ and ex situ UV–visible spectrophotometric measurements to obtain information about the reaction pathway, because NECz gives soluble oligomeric species allowing such measurements. A tentative mechanism is proposed in the light of these results. The redox properties of the new polymers have been studied for possible sensor application. © 2001 Society of Chemical Industry     

Heat pipes thermoelectric solar collectors for energy applications

This study investigates the load characteristics of heat pipe thermoelectric solar collector (HPTSC) in practice. Heat pipe thermoelectric solar collector converts the heat generated by the Sun directly into electrical energy and produces hot water as well. The maximum power in HPTSC is obtained when the internal resistance of the thermoelectric module is equal to the load resistance. It has been observed to be possible to produce both hot water and electricity by improving available solar collectors or producing new generation HPTSC. While it is possible to generate an electrical power of 160 W from a HPTSC of one square meter using the thermoelectric method, the power produced with an average photovoltaic panel with the same area is only 132 W. Accordingly, HPTSC is a superior alternative not only to available solar collectors, but also to available PV panels. HPTSC, involving three different technologies, is environmentally friendly and certainly a product that allows for more efficient use of solar energy.     

Characterization of the Hansenula polymorpha CPY gene encoding carboxypeptidase Y

We have isolated the Hansenula polymorpha CPY gene encoding carboxypeptidase Y (Hp-CPY). The deduced amino acid sequence revealed that Hp-CPY consists of 541 amino acids and has a calculated Mr of 60,793. The protein is highly similar to Saccharomyces cerevisiae CPY (61.8% identity). At the N-terminus of Hp-CPY signals for the entry into the secretory pathway and subsequent sorting to the vacuole were identified. Immunocytochemically, using monospecific antibodies raised against Hp-CPY, the protein was localized to the vacuole. On Western blots, a diffuse protein band was observed in extracts of H. polymorpha cells, suggesting that the protein is glycosylated. This was confirmed by endoglycosidase H treatment, which resulted in a strong reduction of the apparent Mr of the protein. We have investigated the effect of CPY deletion on the degradation of peroxisomes, an autophagous process that occurs when the organelles become redundant for growth. In deltacpy cells peroxisomal proteins were degraded in the vacuole as efficiently as in wild-type H. polymorpha cells, indicating that CPY is not a major proteinase in this pathway.     

Productions and monomer compositions of exopolysaccharides by Lactobacillus delbrueckii subsp. bulgaricus and Streptococcus thermophilus strains isolated from traditional home-made yoghurts and raw milk

In this study, a total of forty‐five strains of lactobacilli and streptococci were determined exopolysaccharide (EPS) production in skim milk and Man Rogosa and Sharpe (MRS)/M17 medium, viscosity and proteolytic activity. The exopolysaccharide production by lactobacilli strains during growth in MRS medium was twenty‐one to 211 mg L^?1, while in skim milk was to thirty‐six to 315 mg L^?1. The EPS production by streptococci strains during growth in M17 medium was sixteen to 114 mg L^?1, while in skim milk was to twenty‐four to 140 mg L^?1. The EPS production of strains was lower in MRS/M17 medium than skim milk. Results showed that it was not clear correlation between the viscosity and EPS production of some strains. All strains were shown proteolytic activity. Positive correlations between exopolysaccharide production and proteolytic activity in skim milk were found some strains of Lactobacillus delbrueckii subsp. bulgaricus and Streptococcus thermophilus. These results indicated that the high exocellular protease‐producing strains can produce high EPS in skim milk. The monomer compositions of the EPSs formed by selected five strains were analysed. Mannose dominated (99–100%) on the EPS produced by L. delbrueckii subsp. bulgaricus and S. thermophilusstrains (except L. delbrueckii subsp. bulgaricus 22) in skim milk and MRS/M17 medium. Besides, the EPSs of strains in skim milk contained small amount of lactose.