Determining of heat balance design criteria for laying hen houses under continental climate conditions

This study focuses on the heat balance status of laying hen houses in regions with continental climate. The material consists of 45 laying hen houses from 27 commercial farms selected from the survey area where continental climate prevails. These laying hen houses differ from each other with respect to capacity, planning system and materials used in construction. First observations were conducted on the size and dimensions of laying hen houses as well as construction materials used, insulation, heat loss factors, ventilation capacity, ground space per hen and total size of laying hen house in order to assess the sufficiency of heat balance. Then, seven laying hen house models were developed. These models were developed by considering the present situation in operating laying hen houses, relevant literature, features of continental climate and suggestions made by firms manufacturing laying hen house construction materials in Turkey. These models give heat conduction coefficients that will prevent moisture concentration and ensure heat balance under continental climate conditions and suggest different sets of materials that can be used on walls and roofs. At the end of the study, under the condition of no moisture on surface of structural components and in areas where the indoor and outdoor temperatures are 25.3 °C and 20.2 °C, respectively, maximum total heat conduction coefficients are calculated to be between 1.38 and 1.73 Kcal/m² °C h. According to the features of area and housing, for providing heat balance, total heat conduction coefficients requirements are calculated to be between 0.62 and 2.08 Kcal/m² °C h for walls, 0.33 and 1.62 Kcal/m² °C h for roofs. In research area, minimum ventilation capacities are determined as 0.72 m³/h hen for carbon dioxide balance and, according to outdoor temperature, as 0.83–1.20 m³/h hen for water vapor balance. Heat loss factors are calculated to be between 0.10 and 0.15 Kcal/°C h hen. We believe that these suggestions will greatly facilitate the work of project engineers in the design of laying hen houses in regions and areas with continental climate.     

Electrically driven phase transition in magnetite nanostructures

Magnetite (Fe3O4), an archetypal transition-metal oxide, has been used for thousands of years, from lodestones in primitive compasses to a candidate material for magnetoelectronic devices. In 1939, Verwey found that bulk magnetite undergoes a transition at TV approximately 120 K from a high-temperature 'bad metal' conducting phase to a low-temperature insulating phase. He suggested that high-temperature conduction is through the fluctuating and correlated valences of the octahedral iron atoms, and that the transition is the onset of charge ordering on cooling. The Verwey transition mechanism and the question of charge ordering remain highly controversial. Here, we show that magnetite nanocrystals and single-crystal thin films exhibit an electrically driven phase transition below the Verwey temperature. The signature of this transition is the onset of sharp conductance switching in high electric fields, hysteretic in voltage. We demonstrate that this transition is not due to local heating, but instead is due to the breakdown of the correlated insulating state when driven out of equilibrium by electrical bias. We anticipate that further studies of this newly observed transition and its low-temperature conducting phase will shed light on how charge ordering and vibrational degrees of freedom determine the ground state of this important compound.     

Penalized-likelihood estimators and noise analysis forrandoms-precorrected PET transmission scans

This paper analyzes and compares image reconstruction methods based on practical approximations to the exact log likelihood of randoms-precorrected positron emission tomography (PET) measurements. The methods apply to both emission and transmission tomography, however, in this paper we focus on transmission tomography. The results of experimental PET transmission scans and variance approximations demonstrate that the shifted Poisson (SP) method avoids the systematic bias of the conventional data-weighted least squares (WLS) method and leads to significantly lower variance than conventional statistical methods based on the log likelihood of the ordinary Poisson (OP) model. We develop covariance approximations to analyze the propagation of noise from attenuation maps into emission images via the attenuation correction factors (ACF's). Empirical pixel and region variances from real transmission data agree closely with the analytical predictions. Both the approximations and the empirical results show that the performance differences between the OP model and SP model are even larger, when considering noise propagation from the transmission images into the final emission images, than the differences in the attenuation maps themselves.     

Effect of acid passivation and H2 sputtering pretreatments on the adhesive strength of sol–gel derived Hydroxyapatite coating on titanium surface

In this study, in order to increase the adhesive strength of a Hydroxyapatite (HA) coating, deposited on the surface of commercially pure titanium, acid passivation and hydrogen sputtering pretreatments were used. The pure titanium surfaces were passivized by acid solution and treated by hydrogen sputtering, at a temperature of 300 °C for 1 h. Ca(NO₃)₂·4H₂O and NH₄H₂PO₄ were chosen as starting precursors for Ca and P sources. HA coatings on the titanium surface were deposited using the sol–gel method and sintered in air at the temperatures of 750^oC-900 °C for 1 h. XRD, SEM, EDS and AFM analysis techniques were used for structural and morphological characterization. Scratch test was performed for determining the adhesion of HA coatings. The experimental results indicated that compact and crack free HA coating, which has a Ca/P ratio of 1:6, was formed on pure Titanium (Ti) surface. The adhesive strength values of the HA coating, pretreated with H₂ sputtering and acid passivation were found to be 72.84 MPa and 55.83 MPa at temperature of 900 °C, respectively. It was observed that H₂ plasma sputtering pretreatment, improved the adhesive strength of the HA coatings compared to pretreatment with acid passivation.     

Nonporous monosize polymeric sorbents: Dye and metal chelate affinity separation of lysozyme

Lysozyme adsorption onto dye‐attached nonporous monosize poly(2‐hydroxyethyl‐methacrylate‐methylmethacrylate) [poly(HEMA‐MMA)] microspheres was investigated. Poly(HEMA‐MMA) microspheres were prepared by dispersion polymerization. The monochloro‐triazine dye, Cibacron Blue F3GA, was immobilized covalently as dye–ligand. These dye‐affinity microspheres were used in the lysozyme adsorption–desorption studies. The effect of initial concentration of lysozyme and medium pH on the adsorption efficiency of dye‐attached and metal‐chelated microspheres were studied in a batch reactor. Effect of Cu(II) chelation on lysozyme adsorption was also studied. The nonspecific adsorption of lysozyme on the poly(HEMA‐MMA) microspheres was 3.6 mg/g. Cibacron Blue F3GA attachment significantly increased the lysozyme adsorption up to 247.8 mg/g. Lysozyme adsorption capacity of the Cu(II) incorporated microspheres (318.9 mg/g) was greater than that of the Cibacron Blue F3GA‐attached microspheres. Significant amount of the adsorbed lysozyme (up to 97%) was desorbed in 1 h in the desorption medium containing 1.0M NaSCN at pH 8.0 and 25 mM EDTA at pH 4.9. In order to examine the effects of separation conditions on possible conformational changes of lysozyme structure, fluorescence spectrophotometry was employed. We conclude that dye‐ and metal‐chelate affinity chromatography with poly(HEMA‐MMA) microspheres can be applied for lysozyme separation without causing any significant changes and denaturation. Repeated adsorption/desorption processes showed that these novel dye‐attached monosize microspheres are suitable for lysozyme adsorption. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 76: 115–124, 2000     

Iterated beam search for the combined car sequencing and level scheduling problem

The level scheduling problem is concerned with the final stage of a multi-stage just-in-time production system so that different models of a product are evenly distributed in a discrete production sequence, thereby making the problem practically an unconstrained optimisation problem. The car sequencing problem, on the other hand, is a constraint satisfaction problem based on a number of options constricting the final assembly schedule. The combined car sequencing and level scheduling problem aims to find the optimal production schedule that evenly distributes different models over the planning horizon and satisfies all option constraints. This paper proposes a parametric iterated beam search algorithm for the combined problem that can be used either as a heuristic or as an exact optimisation method. The paper includes a computational study based on a 54-instance test bed that proves the effectiveness of the proposed algorithm.     

Performance evaluation of small-batch container delivery systems used in lean manufacturing – Part 1: system stability and distribution of container starts

In lean manufacturing, milk run (MR) systems represent route-based, cyclic material-handling systems that are used widely to enable frequent and consistent deliveries of containerised parts on an as-needed basis from a central storage area (the ‘supermarket’) to multiple line-side deposit points on the factory floor. MR systems generally result in short lead times, low variability, and low line-side inventory levels. In the first part of this two-part paper, a basic, single-tugger MR system is described. Stability conditions are derived with respect to the ‘physical capacity’ of the tugger, and the ‘time utilisation’ of the driver/material handler, both of which are key criteria since the number of containers that can be delivered during each MR is limited, and each MR targets a prescribed cycle time to ensure timely and consistent deliveries. We also derive the distribution of the number of containers requested per MR, which allows the model to estimate the probability of exceeding the physical capacity of the tugger or the prescribed cycle time, under the assumption that sufficient kanban are available for each part type delivered by the MR system. The results of the study facilitate the design and analysis of MR systems used in industry.     

Electrorheological properties and creep behavior of polyindole/poly(vinyl acetate) composite suspensions

In this study, electrorheological (ER) properties of polyindole (PIN) and polyindole/poly (vinyl acetate), (PIN/PVAc) conducting composites having different compositions were investigated. Conductivities and dielectric properties of these composites were determined. The particle sizes of the composites were determined by dynamic light scattering method. Suspensions of PIN and PIN/PVAc composites were prepared in silicone oil, at several concentrations (c = 5–25%, m/m) and their sedimentation stabilities were determined. Then the effects of dispersed particle concentration, shear rate, electric field strength, frequency, and temperature onto ER activities of suspensions were investigated. The flow times of these suspensions at various dc electric field strengths were measured. Further, creep tests were applied to the composite suspensions and a reversible viscoelastic deformation was observed.     

Electrochemical behavior of chlorogenic acid at a boron-doped diamond electrode and estimation of the antioxidant capacity in the coffee samples based on its oxidation peak

Abstract: In this study, an electroanalytical methodology for the determination of chlorogenic acid (CGA) was achieved at a boron‐doped diamond electrode under adsorptive transfer stripping voltammetric conditions. The values obtained for CGA were used to estimate the antioxidant properties of the coffee sample based on CGA oxidation. By using square‐wave stripping mode, the compound yielded a well‐defined voltammetric response at +0.49 V with respect to Ag/AgCl in Britton–Robinson buffer at pH 3.0 (after 120 s accumulations at a fixed potential of 0.40 V). At the optimum experimental conditions, linear calibration curve is obtained within the concentration range of 0.25 to 4.0 μg mL^?1 with the limit of detection 0.049 μg mL^?1. The developed protocol was successfully applied for the analysis of antioxidant capacity in the coffee products such as Turkish coffee and instant coffee.