Antimicrobial performance of alkaline ionic fluid (GC-100X) and its ability to remove Escherichia coli O157:H7 from the surface of tomatoes

An efficacy test of GC-100X, a noncorrosive alkaline ionic fluid (pH 12) composed of free radicals and supplemented with xylitol, was carried out against six major foodborne pathogens-Staphylococcus aureus FRI 913, Salmonella enterica serovar Enteritidis ATCC 13076, S. enterica serovar Typhimurium DT104 Korean isolate, Vibrio parahaemolyticus ATCC 17803, Escherichia coli O157:H7 ATCC 43894, and Pseudomonas aeruginosa KCTC 1637-at three different temperatures (4, 25, and 36 degrees C) with or without organic load (2% yeast extract). Results revealed a more than 4-log10 (CFU/ml) reduction (1.0 x 10(4) CFU/ml reduction) against all pathogens reacted at 37 degrees C for 3 h in the absence of organic material. GC-100X solution diluted with an equal volume of distilled or standard hard water (300 ppm CaCO3) showed effective bactericidal activity, particularly against gram-negative bacteria. Washing efficacy of GC-100X solution was compared against E. coli O157:H7 on cherry tomato surfaces with those of a commercially used detergent and chlorine water (100 ppm). Viable cell counts of E. coli O157:H7 that had penetrated to the cores of tomatoes after sanitizing treatment revealed that GC-100X stock and its 5% diluted solutions had similar washing effects to 100-ppm chlorine water and were more effective than the other kitchen detergent. These results indicate that GC-100X has good bactericidal and sanitizing activities and is useful as a new sanitizer for food safety and kitchen hygiene.     

Temperature Distribution of a Low Temperature Heat Pipe with Multiple Heaters for Electronic Cooling

A numerical study has been performed to predict the characteristics on the transient operation of the heat pipe with multiple heaters for electronic cooling. The model of the heat pipe was composed of the evaporator section with four heaters, insulated transport section, and the condensor section with a conductor which is cooled with uniform heat flux condition to surrounding. The governing equations and the boundary conditions were solved by the generalized PHOENICS computational code employing the finite volume method. Two test cases are investigated in present study; Case 1 indicates that the 1st and 2nd heaters among four heating sources are heated off, while the 3rd and 4th heaters are heated on. Case 2 is the inverse situation switched from heating location of Case 1. The results show that the transient time to reach the steady state is shorter for Case 1 than for Case 2. Especially, the temperature difference of the heater during switching operation is relatively small compared to the maximum all- owable operating temperature difference in electronic system. Hence, it is predicted that the heat pipe in present study operates with thermally good reliability even for switching the heaters.     

Telomerase activity and telomere lengths in various cell lines: changes of telomerase activity can be another method for chemosensitivity evaluation

For the cancer cells which have overcome the second mitotic clock (M2), activated telomerase is essential and used as another marker of immortality. Many trials had been initiated to target telomerase, which is known to be specific to tumors. To determine the best in vitro cell system for testing the efficacy of telomerase inhibitors, we evaluated the telomerase activity of various cancer cell lines and measured their telomere lengths. We also treated some cancer cell lines with adriamycin and measured the changes of telomerase activity. Telomerase activity was evaluated in various cell lines with the TRAP (telomeric repeat amplification protocol) assay. Telomerase activity was calculated and translated into arbitrary units by computer-assisted densitometry with the control of telomerase activity in the 293 control cell line. Also, terminal restriction fragment lengths were measured using Southern blotting. We also measured telomerase activity and telomere lengths in 11 benign breast tumor tissues and 19 paired stomach cancer and normal tissues. Cancer cell lines treated with adriamycin we evaluated for changes of telomerase activity and the cell proliferation by MTT assay and dye exclusion test. Telomerase activity of cell lines was 95.3 24.1 unit with a range of 27.6-129.6 unit, while the telomere lengths of those cell lines were variable from 5.0 to 10.4 kbp with a median of 6 kbp. In 11 cancer cell lines which were not yet firmly established, we could not detect any telomerase activity. Low telomerase activity was detected in only 2 benign tumor tissues of breast with a median telomere length of 8.8 (7-10.5) kbp. Among paired 19 gastric cancer and normal tissues, only 7 cancer tissues showed weak telomerase activity. After adriamycin treatment, telomerase activity in YCC-S-1, YCC-S-3, MCF-7 and MCF-7/ADR was decreased in accordance with the changes of the cell numbers. Telomerase is specific to cancer tissues and is expressed differently from organ to organ. Telomerase activity by TRAP assay could be used as a chemosensitivity assay.     

Blood eosinophils and serum IgE as predictors for prognosis of interferon-gamma therapy in atopic dermatitis

BACKGROUND: Interferon-gamma (IFN-gamma) therapy has been reported to be effective in atopic dermatitis. However, IFN-gamma therapy in atopic dermatitis has not yet been well established. In this study, immunologic variables were evaluated as predictors for the prognosis of IFN-gamma therapy in atopic dermatitis. METHODS: Sixty-eight atopic dermatitis patients were each treated 18 times with 2 x 10(6) units/m2 IFN-gamma. Blood IgE level, eosinophil percentage, eosinophil count, and levels of IFN-gamma, interleukin-4 (IL-4), IL-5, and IL-10 were investigated. According to clinical responses, patients were classified into three groups: patients with improved clinical severity scores of over 20% were included in group A; those with improved scores of 20% or less in group B; and those with no improvement in group C. RESULTS: Serum IgE levels and blood eosinophil percentages were the lowest in group A. Most atopic dermatitis patients with an eosinophil percentage over 9% and IgE level over 1500 IU/ml did not respond to IFN-gamma therapy. Initial IL-10 levels were the highest in group A. IL-4 levels in group A, and IL-5 and IL-10 levels in all groups were significantly decreased by IFN-gamma therapy. CONCLUSIONS: IFN-gamma therapy may be recommended for atopic dermatitis patients with blood eosinophil percentages less than 9% and serum IgE levels less than 1500 IU/ml.     

Investigation of ethylene and styrene copolymerization initiated with dinuclear constrained geometry catalysts holding polymethylene as a bridging ligand and indenyl as a cyclopentadienyl derivative

A series of polymethylene‐bridged dinuclear constrained geometry catalysts (CGC) [Me₂Si(Ind)(N^tBu) TiCl₂]₂[(CH₂)_n] ( 1 , n = 6; 2 , n = 9; 3 , n = 12) were synthesized to study the copolymerization of ethylene and styrene. The experiments display that the polymerization activity of the dinuclear catalysts increased in the order of 1 < 2 < 3 , which indicated that the dinuclear CGC with the longest methylene units as a bridge showed the greatest activity. According to the activity correlation with the monomer ratio, all the catalysts exhibited maximum polymerization activity at the monomer ratio of ([styrene]/[ethylene]) of 2. The dinuclear CGC 2 and 3 represented excellent characteristics of styrene reactivity while catalyst 1 represented considerably low styrene reactivity. The relation between the molecular weights of the polymers and the catalysts used in the polymerization is not straightforward. The steric interference in catalyst 1 , containing just six methylene bridges, can be applied to explain not only the strikingly decreased activity but also the very low styrene content in the copolymer. In contrast, the electronic effect seems to be more pronounced in manipulating the polymerization properties of catalysts 2 and 3 having nine and 12 methylene bridges, respectively. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2469–2474, 2003     

Electrostatic potential due to a potential drop across a slit

The electrostatic potential and charge density due to a potential drop across a slit in a thick conducting plane are obtained in analytic closed form. The Fourier transform, mode matching, and superposition are used to represent the potential in the spectral domain. The residue calculus is applied to represent the potential distribution in converging series form. Numerical computations are performed to illustrate the charge-density distribution through a slit     

Retrospective comparison of infusional 5-fluorouracil, doxorubicin, and mitomycin-C (modified FAM) combination chemotherapy versus palliative therapy in treatment of advanced gastric cancer

About one-third of patients with gastric cancer are unresectable at the time of diagnosis. Their median survival is < 6 months, with a grave prognosis. The purpose of this study was to assess the efficacy of a modified FAM (mFAM) regimen in advanced gastric cancer. We retrospectively reviewed the clinical records of 409 advanced gastric cancer patients who had not received curative surgery. Among 409 patients, 202 patients were treated with an mFAM regimen (infusional 5-FU + doxorubocin + mitomycin-C), and 207 patients received no chemotherapy (control group). No differences were found in clinical parameters between the two groups. The 1-year survival rates were 34.1% for the mFAM-treated group and 22.5% for the control group (p = 0.0135). In subset analysis, a higher 1-year survival rate was demonstrated in patients with mFAM and palliative surgery. Of the 154 evaluable patients in the mFAM-treated group, the response rate was 17.5%. In these patients, median response duration was 30 weeks, and progression-free survival was 23 weeks. Overall toxicity of mFAM regimen was relatively tolerable and reversible. In conclusion, FAM combination chemotherapy, which has been used as a standard therapy, prolonged survival after modification of the administration schedule and combination with palliative surgery. A prospective randomized study is warranted to confirm this conclusion from our retrospective study.     

A Linear Power Amplifier Design Using an Analog Feedforward Method

We propose and describe the fabrication of a linear power amplifier (LPA) using a new analog feedforward method for the IMT‐2000 frequency band (2,110–2,170 MHz). The proposed analog feedforward circuit, which operates without a pilot tone or a microprocessor, is a small and simple structure. When the output power of the fabricated LPA is about 44 dBm for a two‐tone input signal in the IMT‐2000 frequency band, the magnitude of the intermodulation signals is below ?60 dBc and the power efficiency is about 7%. In comparison to the fabricated main amplifier, the magnitude of the third intermodulation signal decreases over 24 dB in the IMT‐2000 frequency band.     

An InGaP-GaAs HBT MMIC smart power amplifier for W-CDMA mobile handsets

We demonstrate a new linearized monolithic microwave integrated circuit smart power amplifier of extraordinary high power-added efficiency (PAE), especially at the most probable transmission power of wide-band code-division multiple-access handsets. A PAE of 21% at 16 dBm of output power, which is the maximum bound of the most probable transmission power in IS-95 systems, was obtained, as well as 40% at 28 dBm, the required maximum output power, with a single-chip MMIC power amplifier. The power amplifier has been devised with two InGaP-GaAs heterojunction bipolar transistor amplifying chains parallel connected, each chain being optimized for a different P/sub 1dB/ (1-dB compression point) value: one for 16 dBm for the low-power mode, targeting the most probable transmission power, and the other for 28 dBm for the high-power mode. The high-power mode operation shows 40% of PAE and -30 dBc of adjacent channel leakage power ratio (ACLR) at the maximum output power of 28 dBm. The low-power mode operation exhibits -34 dBc of ACLR at 16 dBm with 14 mA of a quiescent current. This amplifier improves power usage efficiency and, consequently, the battery lifetime of the handset by a factor of three.