Comfort evaluation and bed adjustment according to sleeping positions

This study explodes the relationships between the height adjustment of bed sectors and subjective comfort depending on three types of sleeping positions. An adjustable bed system that regulates the heights of 8 adjustment sectors of the bed was developed. To evaluate the comfort of 9 body areas, subjective ratings were requested from 64 subjects ranging in age from 25 to 50. The subjects included 29 males and 35 females. For an objective evaluation, the patterns of pressure distribution were investigated according to the three sleeping positions. During two separate states (before bed adjustment and after bed adjustment), measurements of the adjusted bed height and pressure distribution, and subjective ratings according to three sleeping positions were performed. Based on the results of the adjusted heights of the 8 sectors in the bed, the subjects preferred the W‐shaped sleeping posture in both the supine and side positions. However, the U‐shaped sleeping posture was preferred in the prone position. With respect to these sleeping positions, the heights of sectors significantly correlated with the subjective ratings presented by the subjects, as well as the ratios of pressure. © 2009 Wiley Periodicals, Inc.     

Global sliding‐mode control with generalized sliding dynamics

A global sliding‐mode control (GSMC) scheme is proposed to provide a framework for ensuring the existence of a sliding mode throughout an entire response. Based on this framework, robust eigenvalue‐assignment GSMC (REA‐GSMC) is proposed to robustly assign closed‐loop eigenvalues that must be real. The eigenvalues being all real, however, leads to sluggish responses. According to most error criteria such as IAE, ISE, and ITAE, the optimum system should have complex eigenvalues. This paper proposes a GSMC scheme with generalized sliding dynamics, referred to as Generalized GSMC, in order to release the previous constraint on the REA‐GSMC. Thus, the Generalized GSMC can be designed to achieve a system that is both robust and optimum in the sense that it minimizes certain error performance indices in spite of the presence of system uncertainties. Experiments were conducted on a two‐link direct‐drive manipulator to demonstrate the effectiveness of the proposed scheme. Copyright © 2009 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Tracking control for switched linear systems with time‐delay: a state‐dependent switching method

Tracking control for switched linear systems with time‐delay is investigated in this paper. Based on the state‐dependent switching method, sufficient conditions for the solvability of the tracking control problem are given. We use single Lyapunov function technique and a typical hysteresis switching law to design a tracking control law such that the H_∞ model reference tracking performance is satisfied. The controller design problem can be solved efficiently by using linear matrices inequalities. Since convex combination techniques are used to derive the delay independent criteria, some subsystems are allowed to be unstable. It is highly desirable that a non‐switched time‐delay system can not earn such property. Simulation example shows the feasibility and validity of the switching control law. Copyright © 2009 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Simultaneous stabilization for a collection of nonlinear control systems in canonical form

A controller design method is provided to simultaneously stabilize a collection of nonlinear control systems in canonical form. It is shown that, under a mild assumption, any collection of nonlinear systems in canonical form can be simultaneously stabilized by one continuous state feedback controller. A constructive universal formula is presented explicitly. An illustrative example is given to demonstrate the validity of the method. Copyright © 2009 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

A new adaptive backstepping Coulomb friction compensator for servo control systems

A new Coulomb friction compensator is proposed for servo control systems in this paper. The novelty of the new approach lies in its capability of assigning the eigenvalues of the resulting closed loop system while attacking the problem. First, based on the standard backstepping methodology, an implicit Lyapunov function, with part of the components being only symbolically constructed at the very beginning, is utilized. To increase the robustness of the system against disturbance and model inaccuracy, an integral term is employed in the design. Using part of the variable gradient method, we are able to turn the implicit Lyapunov function into an explicit one, which is positive definite, and whose time‐derivative is negative definite. Second, it will be shown that the resulting closed loop error system is a switched linear system with two possible active modes that share the same set of eigenvalues, which is at our disposal. Unlike the common adaptive control design methods, such as the Control Lyapunov Function approach, in which the gains are typically positive but otherwise arbitrary, and are hence difficult to choose and have a lack of connection with the system's performance, our new scheme imposes two further constraints on the gains. It turns out that we can then match these gains with the coefficients of the desired characteristic equation of the closed loop system. In this respect, the gains are linked to the system's overall performance, which is a new and very appealing feature for such a scheme. Finally, a procedure of constructing a common Lyapunov function is provided to prove exponential stability of the aforementioned switched linear system. In addition, using the invariance principle, we will show the convergence of the estimated Coulomb friction coefficient to its real value. Numerical simulations are given to validate the effectiveness of the design and its robustness against friction time‐variations. Compared to existing results, the proposed scheme is much simpler, hence, much more advantageous computationally. Copyright © 2009 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

DEVS-Based modeling of VoIP spam callers’ behavior for SPIT level calculation

At the present time the VoIP (Voice over Internet Protocol) service is generally accepted as an alternative for people seeking cheaper means to make a phone call. Users of VoIP service may fall anywhere along a spectrum between types at two extremes: one of which is an ordinary caller who doesn’t use the telephone for commercial purposes, while the other is a person who generates spam calls for commercial purposes. The focus of this paper concerns modeling of spam callers’ behavior to calculate the SPIT (Spam over Internet Telephony) level for management of the quality of service. From the perspective of a VoIP service provider’s view, spam callers are also a type of customer and sometimes they are valuable for increasing revenue. However, if a service provider does not manage spam calls, it can harm their business, because ordinary users might not receive phone calls using the phone numbers of the VoIP service. Thus, there is a trade-off between revenues and usability in managing spam calls in the VoIP service. This work presents a model of spam caller’s behavior using the DEVS (Discrete Event System Specification) formalism. The DEVS formalism is applicable as a model of behavior, by defining the state and state transition of the target of the model. In our model, we use six main parameters to define the states and state transitions. Each state is represented by a number which indicates the SPIT level of a caller. If the value is 1.0 then the caller is more similar to a spam caller. Based on the model definition, we constructed a SPIT level Calculation UI (User Interface) that is used to manage spam calls to improve VoIP service quality.     

Robust background maintenance by estimating global intensity level changes for dynamic scenes

The maintenance of relevant backgrounds under various scene changes is very crucial to detect foregrounds robustly. We propose a background maintenance method for dynamic scenes including global intensity level changes caused by changes of illumination conditions and camera settings. If the global level of the intensity changes abruptly, the conventional background models cannot discriminate true foreground pixels from the background. The proposed method adaptively modifies the background model by estimating the level changes. Because there are changes caused by moving objects as well as global intensity level changes, we estimate the dominant level change over the whole image regions by mean shift. Then, the problem caused by saturated pixels are handled by an additional scheme. In the experiments for dynamic scenes, our proposed method outperforms previous methods by adaptive background maintenance and handling of saturated pixels.     

Proteomic analysis of sera of asymptomatic,early‐stage patients with Wilson's disease

Wilson's disease (WD) is characterized by excessive accumulation of intracellular copper in liver and extrahepatic tissues, leading to significant oxidative stress and tissue damage. To date, several diagnostic biomarkers for WD such as serum ceruloplasmin, serum or urine copper levels and copper content in liver have been identified. However, these biomarkers may not be convincing for the diagnosis in some WD patients. To identify additional novel diagnostic biomarkers, we compared the serum protein profiles of asymptomatic childhood WD patients (n=20), without neurologic manifestation or liver cirrhosis, with normal controls (n=13). Fourteen spots, five up‐regulated and nine down‐regulated (>2‐fold), were differentially expressed in WD patients in comparison to normal control on 2‐DE. Among them, three spots were down‐regulated in both male and female WD. MS/MS analysis revealed that the three spots were complement component C3, complement factor B and alpha‐2 macroglobulin. By comparative proteome analysis, complement component C3, complement factor B and alpha‐2 macroglobulin, which are related to oxidative stress and inflammation, turned out to be good candidates for novel diagnostic biomarkers for early stages of WD.     

Theoretical justification of approximate norm minimization method for intelligent digital redesign

This paper investigates the theoretical justification of intelligent digital redesign (IDR) methods based on the approximate discrete-time models. Its main purpose is to design the digital fuzzy controller achieving the minimum norm distance between the trajectories of the approximate closed-loop systems under the analog and the digital controls. It is verified that, if there exist the digital gains such that the approximate norm distance is sufficiently small, the redesigned controller makes the trajectories of the exact closed-loop systems close, or, at least, asymptotically stabilizes the plant.     

Photomultiplication-Type Organic Photodetectors with High EQE-Bandwidth Product by Introducing a Perovskite Quantum Dot Interlayer

A photomultiplication (PM)-type organic photodetector (OPD) that exploits the ionic motion in CsPbI₃ perovskite quantum dots (QDs) is demonstrated. The device uses a QD monolayer as a PM-inducing interlayer and a donor–acceptor bulk heterojunction (BHJ) layer as a photoactive layer. When the device is illuminated, negative ions in the CsPbI₃ QD migrate and accumulate near the interface between the QDs and the electrode; these processes induce hole injection from the electrode and yield the PM phenomenon with an external quantum efficiency (EQE) >2000% at a 3 V applied bias. It is confirmed that the ionic motion of the CsPbI₃ QDs can induce a shift in the work function of the QD/electrode interface and that the dynamics of ionic motion determines the response speed of the device. The PM OPD showed a large EQE-bandwidth product >10⁶ Hz with a −3 dB frequency of 125 kHz at 3 V, which is one of the highest response speeds reported for a PM OPD. The PM-inducing strategy that exploits ionic motion of the interlayer is a potential approach to achieving high-efficiency PM OPDs.