Stability of Mixtoxantrone Hydrochloride in Solution

A stability-indicating reversed-phase high performance liquid chromatographic method was developed for the detection of mitoxantrone HC1 and its degradation products under accelerated degradation conditions. The degradation kinetics of mitoxantrone HC1 in aqueous solution over a pH range of 1.18 to 7.20 and its stability in propylene glycol-or polyethylene glycol 400-based solutions were investigated. The observed rate constants were shown to follow apparent first-order kinetics in all cases. The pH-rate profile shows that maximum stability of mitoxantrone HC1 was obtained at pH 4.01. No general acid or base catalysis from acetate or phosphate buffer species was observed. The catalysis rate constants on the protonated mitoxantrone imposed by hydrogen ion water and hydroxy ion were determined to be 3.72 × 10 min^-1 5.64 × 10-min^-1 and 1.108 × 10^-2min^-1, respectively. The degradation rate constants of mitoxantrone affected by different ionic strength systems. Irradiation with 254 nm UV light at 25±0.5°C was found when canpared with the light-protected controls. Incorporation of nonaqueous propylene glycol or polyethylene glycol in the pH 4.01 mitoxantrone solution shows an increase in its stability at 502±0.5°C.     

Energy efficiency in cloud computing based on mixture power spectral density prediction

Due to the budget and environmental issues, adaptive energy efficiency receives a lot of attention these days, especially for cloud computing. In the previous research, we developed a combined methodology based on nonparametric prediction and convex optimization to produce proactive energy efficiency-oriented solution. In this work, the predictive analysis was further enhanced by deriving the mixture power spectral density to model the complex cloud monitoring statistics. By engaging the improved technique to the predictive analysis, the prediction process was more adaptive to handle the fluctuation in system utilization. As a consequence, the optimization process could subsequently produce more appropriate setting for energy savings. After the infrastructure setting has been made available, the instruction of virtual machine migration was created and implemented by the cloud orchestrator. This instruction condensed the services into the pool of active facilities, satisfying the objective of power efficiency. Eventually, any physical machine out of the power configuration would be gradually terminated. Compared to our former method, the effectiveness of the proposed technique has been proven by cutting down 4.92% of energy consumption, while still maintaining a similar quality of services.

     

Performance implications of internet channels in financial services: A comprehensive perspective

Advances in information technology (IT) have forced financial services firms to explore new organizational forms and deliver service innovation. Given the obvious differences in the business model in which the financial services sector provides online services, it is natural to ask whether the emergence of Internet channels leads to superior achievement. Using a sample of twenty-four Taiwanese publicly traded financial services firms from 1997 to 2003, this empirical study attempts to assess the Internet channel??s effect on firm performance by means of applying event study methodology and data envelopment analysis. Results show that the magnitudes of average abnormal returns are uniformly positive and increase the operating efficiency of firms following announcements via Internet channels. This work therefore concludes that Internet channels have positive influences on firm performance.     

A new LCL-lens array with electrodes of interlaced structure to be applied for auto-stereoscopic 3D displays

A new design of the liquid crystal lenticular (LCL) lens array with interlaced electrodes is proposed to realize an auto-stereoscopic 3D display. The structure of interlaced electrodes aims to generate a desired non-uniform electric filed to improve the focusing ability of the LCL-lens array with lower voltage drives. This paper is organized as first to describe the design criteria of a lenticular lens sheet for wide extended graphics array LCD panel. Based on the designed lenticular lens array, an LCL-lens array with proposed interlaced electrodes is next designed. The fabrication and the detailed structure are given. A series of experiments are then conducted and successfully verify the focusing capability and desired 3D display functions, that is, to separate two images to right and left eyes. Also, the developed auto-stereoscopic 3D display is able to adapt to varied viewer locations with favorable imaging quality.     

工业废渣磷石膏用作充填材料的研究

研制了以工业废渣磷石膏为基材的充填材料.改性后磷石膏的耐水性大大增强,抗压强度≥0.79 MPa、渗透系数≤1×10-5cm.s-1,并且具有合适的C、Φ值.     

间二甲苯-磷酸-水三元体系的液-液相平衡

实验测定了不同温度下,间二甲苯-水二元体系和间二甲苯-磷酸-水三元体系的液-液相平衡数据。研究了磷酸中的杂质Fe~(3+)、Al~(3+)和Mg~(2+)对间二甲苯-磷酸-水三元体系相平衡的影响,以及杂质在两相中的分配情况。研究结果对共沸精馏浓缩磷酸提供了必要的理论依据和基础数据。     

Tar sand extractions with microemulsions: I-the dissolution of light hydrocarbons by microemulsions using 2-butoxyethanol and diethylmethylamine as cosurfactants

For oil sand extractions with microemulsions it is important to disperse large quantities of light hydrocarbons in an aqueous medium. Fundamental studies on the properties of 2-butoxyethanol (BE) and diethylmethylamine (Et₂McN) in water suggest that these two liquids could be more effective cosurfactants than the usual alcohols used for this purpose. The phase diagrams of microemulsions using BE and Et₂MeN as cosurfactants, combined with typical ionic and non-ionic surfactants and typical aliphatic and aromatic hydrocarbons, were therefore investigated and compared with microemulsions based on n-butanol. Although the phase diagrams depend significantly on the nature of the surfactant and of the oil, the monophasic region generally increases with the cosurfactant in the order n-butanol < Et₂McN < BE. With the active mixture BE-cetyltrimethylammonium bromide, temperature has little effect on the phase diagram and NaCl generally destabilizes the microemulsion.     

Re-GAN：残差生成式对抗网络算法

目的 生成式对抗网络（generative adversarial network,GAN）是一种无监督生成模型,通过生成模型和判别模型的博弈学习生成图像。GAN的生成模型是逐级直接生成图像,下级网络无法得知上级网络学习的特征,以至于生成的图像多样性不够丰富。另外,随着网络层数的增加,参数变多,反向传播变得困难,出现训练不稳定和梯度消失等问题。针对上述问题,基于残差网络（residual network,ResNet）和组标准化（group normalization,GN）,提出了一种残差生成式对抗网络（residual generative adversarial networks,Re-GAN）。方法 Re-GAN在生成模型中构建深度残差网络模块,通过跳连接的方式融合上级网络学习的特征,增强生成图像的多样性和质量,改善反向传播过程,增强生成式对抗网络的训练稳定性,缓解梯度消失。随后采用组标准化（GN）来适应不同批次的学习,使训练过程更加稳定。结果 在Cifar10、CelebA和LSUN数据集上对算法的性能进行测试。Re-GAN的IS （inception score）均值在批次为64时,比DCGAN （deep convolutional GAN）和WGAN （Wasserstein-GAN）分别提高了5%和30%,在批次为4时,比DCGAN和WGAN分别提高了0.2%和13%,表明无论批次大小,Re-GAN生成图像具有很好的多样性。Re-GAN的FID （Fréchet inception distance）在批次为64时比DCGAN和WGAN分别降低了18%和11%,在批次为4时比DCGAN和WGAN分别降低了4%和10%,表明Re-GAN生成图像的质量更好。同时,Re-GAN缓解了训练过程中出现的训练不稳定和梯度消失等问题。结论 实验结果表明,在图像生成方面,Re-GAN的生成图像质量高、多样性强;在网络训练方面,Re-GAN在不同批次下的训练具有更好的兼容性,使训练过程更加稳定,梯度消失得到缓解。     

基于SPI双机通信的弧光保护系统

针对弧光保护系统的实际需要,设计了一种基于SPI的双机通信系统。简要阐述了该系统的设计思路,并给出了具体的实现方法。实验表明,采用该方法能够满足实际工程中的需求,对于其他SPI的应用也有很好的借鉴价值。     

聚类算法在高脂血症辨证分型研究中的应用

高脂血症的辨证分型标准化研究是中医基础研究的热点与难点,利用计算机挖掘技术中的聚类算法对高脂血症临床中医症状数据进行分析,得到具有统计学意义的分类结果,同时寻找其与中医证候相对应的关系具有重要研究价值.通过编写适用于中医证候分类的聚类算法并提供设置相似度阈值等交互界面,实现了大规模样本的自适应分类,从而使聚类结果更加科学客观.将得到的每个类别中所对应样本的病症特征与所属中医的证候类别联系起来,为辨证分型标准化奠定了基础.