自组织InAs/GaAs量子点的表面氮化研究

用低温光荧光(PL)和透射电子显微镜(TEM)研究了表面氮化自组织InAs/GaAs量子点的光学性能和微观结构。结果表明氮化后形成薄层的InAsN薄膜作为应变缓和层覆盖在量子点的表面,使得随着氮化时间的增加,InAs量子点的位错密度提高、尺寸变大、纵横比提高、发光波长变长、强度变低。     

The optical alignment system of the ZEUS microvertex detector

The laser alignment system of the ZEUS microvertex detector is described. The detector was installed in 2001 as part of an upgrade programme in preparation for the second phase of electron–proton physics at the HERA collider. The alignment system monitors the position of the vertex detector support structure with respect to the central tracking detector using semi-transparent amorphous-silicon sensors and diode lasers. The system is fully integrated into the general environmental monitoring of the ZEUS detector and data has been collected over a period of 5 years. The primary aim of defining periods of stability for track-based alignment has been achieved and the system is able to measure movements of the support structure to a precision around .     

Possible 3He Boltzmann Gas Formed on Three-Dimensional Nanopores Preplated with 4He

We have measured the heat capacity of ³He adsorbed on three-dimensionally connected nanopores, 2.7 nm in diameter, preplated with about 1.3 atomic layers of ⁴He. At low coverages of ³He, the ³He heat capacity is roughly constant at the measured temperatures between 0.1 and 1 K. Its molar heat capacity is on the order of the gas constant R, between 1.1R and 1.8R. This suggests a Boltzmann gas state of the adsorbed ³He. At high coverages, the heat capacity is likely approaching linear in T at low temperatures, which suggests a degenerate state at further lower temperatures.     

Full-photonic-bandgap structures for prospective dye-sensitized solar cells

The photonic bands of various TiO₂ photonic crystals filled with acetonitrile were investigated with the perspective for application to dye-sensitized solar cells. Finite-difference time-domain methods revealed that three-dimensional (3D) photonic crystals with diamond-log and inverse-diamond-log structures composed of TiO₂ and an electrolyte had full photonic band gaps under certain conditions. The quality factor of the band gap and the electrolyte filling factor of the structures were optimized. Moreover, with the consideration for easy fabrication of such photonic crystals, two-dimensional (2D) photonic crystals, i.e., TiO₂ slabs with square holes filled with electrolytes, were also investigated. Two-dimensional structures that have a full photonic band gap were also discovered. These discoveries may lead to early electrochemical applications of dye-sensitized photonic-crystal electrodes.     

Enantioselective addition Of diketene to aldehydes promoted by chiral schiff base—titanium alkoxide complex. Application to asymmetric synthesis of potential inhibitors of HMG coenzyme reductase

Highly enantioselective addition of diketene to aldehydes was achieved by using novel Schiff base—titanium alkoxide complexes. Up to 92% ee of 5-hydroxy-3-oxoesters was obtained. This procedure provides an efficient method for the asymmetric synthesis of potential inhibitors of HMG coenzyme reductase.     

Preparation of helical carbon and graphite films using morphology-retaining carbonization

Helical carbon and graphite films were prepared from iodine-doped helical polyacetylene (H-PA) film using currently developing morphology-retaining carbonization. It was found from scanning electron microscopy (SEM) observations that the hierarchical helical morphology of the H-PA film remains unchanged even after the carbonization at 800 °C. Besides, the weight loss of the film due to the carbonization was very small, which was only a few percent to the weight of the film before doping. Furthermore, the graphite film prepared by the subsequent heating at 2600 °C still retained the same morphology as those in the original H-PA film and in the helical carbon film prepared at 800 °C. X-ray diffraction (XRD) and Raman scattering measurements were then pursued. The results showed that graphitic crystallization proceeds in the carbon film through the heat treatment at 2600 °C. Transmission electron microscopy (TEM) image of a single helical graphitic fibril was also observed by ultrasonicating the graphite film in ethanol. Carbonization of the H-PA films by way of iodine doping was found to afford helical carbon and graphite films, where spiral morphologies and even helical fibril structures were completely preserved.     

Phase diagram of the Sb2Se3-CuInSe2 pseudobinary system and flux growth of CuInSe2 single crystals

The phase diagram of the Sb₂Se₃-CuInSe₂ pseudobinary system is constructed by using differential thermal analysis and X-ray diffraction. Based on the constructed phase diagram, solution growth of CuInSe₂ crystals is investigated. The grown crystals are evaluated by X-ray diffraction, electron probe microanalysis, Hall effect and inductively coupled plasma measurements. The results indicate that the crystals are not contaminated by the constituent of the flux, i.e., Sb. Hence, Sb₂Se₃ is promising as a solvent for the growth of CuInSe₂ crystals at temperatures lower than 800°C.     

Development of multianode photomultiplier tube

We have developed a multianode photomultiplier tube (MAPMT) which has a sensitive cathode diameter of 36 mm and an anode with 88 segments. The position sensitivity of the tube was studied by using light from a LED and scintillation light from a scintillation-fiber bundle. We observed particle tracks for the first time by using a single photomultiplier tube.     

One-Dimensional Phonon State of 4He Films Adsorbed in Straight Nanopores

We have studied heat capacities of ⁴He adsorbed in straight nanopores 1.8, 2.2, and 2.8 nm in diameter. Heat capacities of the ⁴He fluid film on the solid layer at 0.08–0.4 K show power laws close to T in 1.8 nm pores, close to T ² in 2.8 nm pores, and a crossover from T to T ² with increasing temperature in 2.2 nm pores. These heat capacities are explained by a model assuming a phonon dispersion with continuous one-dimensional (1D) states in the axial direction and discrete energy levels in the azimuthal direction. By fitting experimental data to the model, the phonon velocity along the pore axis and the energy gap for propagation in the cross section are derived. At temperatures sufficiently lower than the energy gap, where the thermal wave length of phonons is much longer than the effective pore diameter, the ⁴He fluid films show a T-linear heat capacity of 1D phonons propagating only along the pore axis. At higher temperatures, a 1D-2D crossover of phonons occurs.      

Limitations of the method using peroxidase activity of hemoglobin for detecting lipid hydroperoxides

The method using peroxidase activity of hemoglobin (Hb) for the determination of lipid peroxides was examined by using pure methyl linoleate hydroperoxides, trilinoleoylglycerol hydroperoxides and egg yolk phosphatidylcholine hydroperoxides as substrates and tetramethyl benzidine as electron donor for the peroxidase reaction of Hb. The reactivities of these substrates were quite varied. Furthermore, some electron donors were tested for peroxidase activity of Hb, but none showed a complete reduction of methyl linoleate hydroperoxides. From these results, it seems the Hb method needs to be carefully applied to biological materials that contain mixtures of different types of lipid classes.