Burning Rate Augmentation of BAMO Based Propellants

Thermal decomposition and the burning properties of BAMO based propellants with HMX or AN/HMX have been investigated. The heat generated by the azide binder decomposition initiated and accelerated the thermal decomposition of HMX and AN. Ammonium perchlorate (AP) and lead stearate with carbon black significantly altered the mechanisms of the thermal decomposition and the burning properties of the HMX based propellants. AP showed an increase in burning rate with a slight decrease in burning rate pressure exponent. The lead catalyst yielded high value of the burning rate with the lowest pressure exponent. The ammonium dichromate also influenced the mechanisms of the thermal decomposition and the burning properties of the AN/HMX samples. The combination of ammonium dichromate and copper chromite was the most effective on the burning rate augmentation of AN/HMX based propellants. AN sublimed and evaporated from the condensed phase and mainly reacted exothermically in the gas phase HMX and AN/HMX based propellants showed smokeless burning characteristics in the small rocket motor combustion tests.     

Profiling and Imaging of Phospholipids in Brains of Abcd1‐Deficient Mice

ABCD1 is a gene responsible for X‐linked adrenoleukodystrophy (X‐ALD), and is critical for the transport of very long‐chain fatty acids (VLCFA) into peroxisomes and subsequent β‐oxidation. VLCFA‐containing lipids accumulate in X‐ALD patients, although the effect of ABCD1‐deficiency on each lipid species in the central nervous system has not been fully characterized. In this study, each phospholipid and lysophospholipid species in Abcd1‐deficient mice brains were profiled by liquid chromatography‐mass spectrometry. Among the phospholipid and lysophospholipid species that are significantly more enriched in Abcd1‐deficient mice brains, VLCFA were present in 75, 15, 5, 4, and 1 species of phosphatidylcholine, phosphatidylethanolamine, sphingomyelin, lysophosphatidylcholine, and lysophosphatidylethanolamine, respectively. Most VLCFA were incorporated at the sn‐1 position of phosphatidylcholine and phosphatidylethanolamine. Among the phospholipid species that are significantly less enriched in Abcd1‐deficient mice brains, odd‐numbered saturated or mono‐unsaturated fatty acyl moieties are contained in all phosphatidylcholine species. In addition, a number of phosphatidylglycerol, phosphatidylinositol, and phosphatidylserine species contained highly unsaturated fatty acyl moieties. Intriguingly, 44:1 phosphatidylcholine with VLCFA was mainly distributed in the gray matter, such as the cortex, but not in the white matter in the cerebrum and cerebellum. These results show that ABCD1‐deficiency causes metabolic alternation of long‐chain fatty acids and VLCFA. Moreover, our results imply a molecular mechanism for the incorporation of saturated or monounsaturated VLCFA into the sn‐1 position of phospholipids, and also indicate that the distribution of phospholipids with VLCFA may correlate with the development of X‐ALD.     

Imaging dynamics of charge-auto-organisation in glass capillaries

Multiply charged ion beam transmission through insulating capillaries is today a very active field of research. Thanks to the work of several groups during the last five years, several features of this unexpected process have been evidenced. The open challenge is to understand and control the self-organized charging-up of the capillary walls, which leads finally to the ion transmission. Up to now, the specific charge distribution on the inner surface, as well as the dynamics of the build-up, are still to be understood. While capillaries usually studied are microscopic pore networks etched in different materials, our concern is in macroscopic single capillaries made of glass. With a length of several centimeters and a diameter of a few micrometers at the exit, these capillaries have nevertheless the same aspect ratio as the etched pores (length/diameter ≈ 100). One of the leading goals of this research on single capillaries is to produce multi-charged ion beams with diameters smaller than a micrometer (nano-beams). These glass capillaries offer the opportunity to be used as an ion funnel due to their amazing properties of guiding and focusing highly charged ion beams without altering neither their initial charge state nor the beam emittance (<10⁻³ π mm mrad). However, the understanding of the underlying process is not complete and relies on models assuming charge patches distributed along the capillary and which still need to be tested. We present the first observation imaging the dynamics of the charging-up process in single glass capillaries. During the build-up of the self-organized charge deposition on the capillary walls, the 230 keV Xe²³⁺ transmitted beam is deflected back and forth several times as the outgoing current increases. This is in agreement with the picture of charge patches created sequentially along the capillary and thus deflecting the beam until a stationary state is reached.     

Activation cross sections of the Yb(p,xn)Lu reaction for indirect production of the therapeutic radionuclide Yb

Activation cross sections of the ^natYb(p,xn)¹⁶⁹Lu reaction have been measured for the first time up to 70 MeV to investigate the production possibility of the radionuclide ¹⁶⁹Yb through decay of its parent ¹⁶⁹Lu. The cross sections were measured using the stacked foil irradiation technique and gamma spectrometry. The experimental data were compared with the results of the ALICE-IPPE theoretical model code. Different production routes were compared for the internal radiotherapy related radioisotope ¹⁶⁹Yb. Above 30 MeV proton energy the integral yield of the ^natYb(p,xn)¹⁶⁹Lu reaction is higher than that of the earlier investigated ¹⁶⁹Tm(p,n)¹⁶⁹Yb, ¹⁶⁹Tm(d,2n)¹⁶⁹Yb, ^natEr(α,xn)¹⁶⁹Yb, ^natYb(α,x)¹⁶⁹Lu and ^natHf(p,x)¹⁶⁹Lu reactions at the equivalent particle energies.     

Guiding and blocking of highly charged ions through a single glass capillary

Highly charged ions produced in an electron beam ion trap, I^q+, q = 10-50, were transmitted through a tapered glass capillary having diameter of at the end. We found that for a particular beam current, there exists an optimum tilting angle of the capillary in which a steady output of ions is observed, while for smaller angles, the ion counts first rise, then gradually decay on a time scale of minutes. In the case of steady transmission, the charge state distribution is found to be slightly towards the lower side.     

A Low-Loss Built-In Current Sensor

This paper presents a novel built-in current sensor that uses two additional power supply voltages besides the system power supply voltage, and that is constructed by using a current mirror circuit to pick up an abnormal IDDQ. It is activated only by an abnormal quiescent power supply current and minimizes the voltage drop at the terminal of the circuit under test. Simulation results showed that it could detect 16-A IDDQ against 0.03-V voltage drop at 3.3-V VDD and that it reduced performance degradation in the circuit under test. It is therefore suitable for testing low-voltage integrated circuits. Moreover, we verified the behavior of the sensor circuit implemented on the board by using discrete devices. Experimental results showed that the real circuit of the sensor functioned properly.     

A method to modify coordinates of detectors in positron emission tomography systems

A new method to modify coordinates of detectors in any positron emission tomography (PET) system using a radioactive point source is developed. This method is based on selecting a centered detector in each detector block of PET and measuring coincidence counts between the two centered detectors in opposite detector blocks to find the coordinates of their LOR (Line of Response). Due to slight misalignment of detector positions, measured LORs may not intersect at a single point. Based on the proposed method, the coordinates of detectors can be measured with very high accuracy and the coordinate of the center of the gantry (which is normally the same as the center of field of view) can be defined correctly. The results of the application of our method to a small animal PET system (FinePET), which was recently developed at Tohoku University, Japan, are shown here. The method is expected to contribute to the design and development of PET systems which can realize a very high spatial resolution of less than 1 mm FWHM.     

Single-Electron Device With Si Nanodot Array and Multiple Input Gates

We have developed a flexible-logic-gate single-electron device (SED) with an array of nanodots. Although the small size of SEDs is highly advantageous, the size of the nanodots inevitably fluctuates, which causes variations in device characteristics. This variability can be eliminated and high device functionality can be obtained by exploiting the oscillatory characteristics and multigate capability of SEDs. We fabricated, on a silicon-on-insulator wafer, a Si nanodot array device with two input gates and a control gate and investigated its basic operation characteristics experimentally. The device was demonstrated to operate as a logic gate providing six important logic functions ( and, or, nand, nor, xor, and xnor), which are obtained by adjusting the control-gate voltage.