Effect of surface roughness and surface modification of indium tin oxide electrode on its potential response to tryptophan

The effect of surface modification of indium tin oxide (ITO) electrode on its potential response to tryptophan was investigated for ITO substrates with different surface roughness. It was found that a small difference in surface roughness, between ∼1 and ∼2 nm of R_a evaluated by atomic force microscopy, affects the rest potential of ITO electrode in the electrolyte. A slight difference in In:Sn ratio at the near surface of the ITO substrates, measured by angle-resolved X-ray photoelectron spectrometry and Auger electron spectroscopy is remarkable, and considered to relate with surface roughness. Interestingly, successive modification of the ITO surface with aminopropylsilane and disuccinimidyl suberate, of which essentiality to the potential response to indole compounds we previously reported, improved the stability of the rest potential and enabled the electrodes to respond to tryptophan in case of specimens with R_a values ranging between ∼2 and ∼3 nm but not for those with R_a of ∼1 nm. It was suggested that there are optimum values of effective work function of ITO for specific potential response to tryptophan, which can be obtained by the successive modification of ITO surface.     

Supercritical fluid extraction of bacterial and archaeal lipid biomarkers from anaerobically digested sludge

Supercritical fluid extraction (SFE) was used in the analysis of bacterial respiratory quinone (RQ), bacterial phospholipid fatty acid (PLFA), and archaeal phospholipid ether lipid (PLEL) from anaerobically digested sludge. Bacterial RQ were determined using ultra performance liquid chromatography (UPLC). Determination of bacterial PLFA and archaeal PLEL was simultaneously performed using gas chromatography-mass spectrometry (GC-MS). The effects of pressure, temperature, and modifier concentration on the total amounts of RQ, PLFA, and PLEL were investigated by 23 experiments with five settings chosen for each variable. The optimal extraction conditions that were obtained through a multiple-response optimization included a pressure of 23.6 MPa, temperature of 77.6 °C, and 10.6% (v/v) of methanol as the modifier. Thirty nine components of microbial lipid biomarkers were identified in the anaerobically digested sludge. Overall, the SFE method proved to be more effective, rapid, and quantitative for simultaneously extracting bacterial and archaeal lipid biomarkers, compared to conventional organic solvent extraction. This work shows the potential application of SFE as a routine method for the comprehensive analysis of microbial community structures in environmental assessments using the lipid biomarkers profile.     

Changes in Aging Behavior and Defect Structure of Yttria-Fully-Stabilized ZrO2 with Sc2O3 Doping

Methods of suppressing decreased conductivity in 8 mol% Y₂O₃-stabilized–92 mol% ZrO₂ (8YSZ) with aging were investigated. Different amounts of Sc₂O₃ were doped into 8YSZ. The electrochemical properties of Sc₂O₃-doped 8YSZ were measured, and the microstructural and local structural changes were characterized. The present results indicate that an appropriate amount of Sc₂O₃ doping, 3 or 4 mol%, effectively suppresses decreased conductivity with aging in 8YSZ.     

X-ray absorption fine structure study on residue bromine in carbons with different degrees of graphitization

The structure of bromine residue compounds was investigated by X-ray absorption fine structure (XAFS) in order to interpret where and how bromine is present in carbons with different degrees of graphitization. The residue compounds can be classified into three groups, as obtained from X-ray absorption near edge structure (XANES) spectra and the values of the intramolecular distance r_Br–Br determined by extended X-ray absorption fine structure (EXAFS). In Group I, prepared from the host carbons heat treated at temperatures higher than 1900 °C, bromine exists in the interlayer space of graphite in the form of Br₂ molecules with interaction of the π electrons of graphite. In Group III, from carbon heat treated at 1000 °C, most of the bromine probably reacts with carbon atoms having a dangling bond or functional groups. For Group II, where the host carbons are heat treated at intermediate temperatures, it is likely that bromine exists in undeveloped defects with a unique electronic state.     

Gene expression within cell-sized lipid vesicles

Functional protein synthesis was observed in cell-sized lipid vesicles following encapsulation of a gene-expression system. Expression of rsGFP (red-shifted green fluorescent protein) within individual vesicles was observed by fluorescence microscopy. Interestingly, at the early stage of the reaction, the expression efficiency inside the vesicle was remarkably higher than that in the solution outside. The synthesized rsGFP in individual vesicles is safe from attack by proteinase K added to the external aqueous solution. Studies on cell-sized vesicles expressing protein should contribute to a fundamental understanding of certain aspects of living systems and will be useful for practical applications, such as the construction of microreactors.     

Effect of Phosphorus Ions on the Proton Conductivity in the Sol–Gel-Derived Porous Glasses

The effect of phosphorus ions on the proton conductivity was examined for the sol–gel-derived glasses. The porous glasses were prepared through hydrolysis of PO(OCH₃)₃ and Si(OC₂H₅)₄, in which the phosphorus ions consisted of the POH bonds and were dissolved into the silica matrix without any P-O-Si bond. The electrical conductivity increased in a humid atmosphere and reached ∼30 mS/cm at 50°C under 70% RH. High conductivity is achieved by both the POH bonds and the molecular water bonded to the POH bonds. The conductivity increased with a change in humidity from 40% to 80% RH. The phosphorus ions were selectively dissolved in water, resulting in a lower conductivity.     

Increased Lipid Synthesis and Decreased β-Oxidation in the Liver of SHR/NDmcr-cp (cp/cp) Rats, an Animal Model of Metabolic Syndrome

SHR/NDmcr-cp (cp/cp) rats (SHR/NDcp) are an animal model of metabolic syndrome. A previous study of ours revealed drastic increases in the mass of palmitic (16:0), oleic (18:1n-9), palmitoleic (16:1n-7), cis-vaccenic (18:1n-7) and 5,8,11-eicosatrienoic acids in the liver of SHR/NDcp. However, detailed information on the class of lipid accumulated and the mechanism responsible for the overproduction of the accumulated lipid in the liver was not obtained. This study aimed to characterize the class of lipid accumulated and to explore the mechanism underlying the lipid accumulation in the liver of SHR/NDcp, in comparison with SHR/NDmcr-cp (+/+) (lean hypertensive littermates of SHR/NDcp) and Wistar Kyoto rats. In the liver of SHR/NDcp, de novo synthesis of fatty acids (16:0, 18:1n-9 and 16:1n-7) and triacylglycerol (TAG) synthesis were up-regulated and fatty acid β-oxidation was down-regulated. These perturbations of lipid metabolism caused fat accumulation in hepatocytes and accumulation of TAG, which were enriched with 16:0, 18:1n-9 and 16:1n-7, in the liver of SHR/NDcp. On the other hand, no changes were found in hepatic contents of diacylglycerol and unesterified fatty acid (FFA); among FFA, there were no differences in the hepatic concentrations of unesterified 16:0 and stearic acid between SHR/NDcp and two other groups of rats. Moreover, little change was brought about in the expression of genes responsive to endoplasmic reticulum stress in the liver of SHR/NDcp. These results may reinforce the pathophysiological role of stearoyl-CoA desaturase 1 and fatty acid elongase 6 in the liver of SHR/NDcp.     

Effect of reaction kinetics of polymer electrolyte on the ion‐conductive behavior for poly(oligo oxyethylene methacrylate)–LiTFSI mixtures

The effect of the reaction kinetics on the ionic conductivity for a comblike‐type polyether (MEO) electrolyte with lithium bis(trifluoromethane sulfonyl)imide (LiTFSI) was characterized by DSC, complex impedance measurements, and ¹H pulse NMR spectroscopy. The ionic conductivity of these electrolytes was affected by the reaction condition of the methacrylate monomer and revealed by the glass transition temperature (T_g), spin–spin relaxation time (T₂), steric effects of the terminal groups, and the number of charge carriers indicated by the VTF kinetic parameter. In this system, the electrolytes prepared by the reaction heating rate of 10°C/min of MEO–H and 15°C/min of MEO–CH₃ showed maximum ionic conductivity, σ_i, two to three times higher in magnitude than that of the σ_i of the others at room temperature. As experimental results, the reaction kinetic rate affected the degree of conversion, the ionic conductivity, and the relaxation behaviors of polyether electrolytes. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2149–2156, 2003     

Ionic conductivity studies of poly(ethylene oxide)-lithium salt electrolytes in high-pressure carbon dioxide

We have measured ionic conductivity of PEO-LiX [anion X=N(CF₃SO₂)₂ (TFSI), ClO₄, CF₃SO₃, BF₄, NO₃, and CH₃SO₃] polymer electrolytes in CO₂ at pressures varied from 0.1 to 20 MPa. From the temperature dependence in supercritical CO₂, a large increase in the conductivity for PEO-LiBF₄ and LiCF₃SO₃ electrolytes has been observed. Permeation of the CO₂ molecules gave rise to the plasticization for crystal domains in the electrolytes, which is related to the reduction in transition point of the Arrhenius plot corresponding to the melting of crystal PEO. Relation between the conductivity and CO₂ reduced density revealed that the electrolytes containing fluorinated anions such as ‘CO₂-philic’ BF₄ and CF₃SO₃ increase in the conductivity with increasing the density. This indicates that the salt dissociation was promoted by the CO₂ permeation and the Lewis acid-base interactions between fluorinated anions and CO₂ molecules.     

Polarization dependent optical absorption properties of single-walled carbon nanotubes and methodology for the evaluation of their morphology

Polarization dependence of the optical absorption properties of SWNTs is presented and investigated in detail for the energy range 0.5-6 eV. We found that the absorption peaks in the UV region at approximately 4.5 and 5.25 eV exhibit remarkable and different dependencies on the morphology of the SWNT film, or equivalently, on the incident light polarization relative to the SWNT axis. An analytical pathway to evaluate the physical degree of SWNT alignment for a vertically aligned SWNT film is developed with both transition dipoles parallel and perpendicular to the SWNT axis taken into account. This analytical procedure, coupled with polarized optical absorption measurements performed on the vertically aligned SWNT film grown on substrates, leads to the determination of the bare optical absorption cross-section of SWNTs for both parallel and perpendicular to SWNT axis. In the end, the proposed methodology for evaluating the SWNT film morphology is applied to investigate the transient change of the degree of alignment in the growth process of our vertically aligned SWNT films.