Effect of spatial structure on colorfulness adaptation for natural images

We examined whether the perception of the colorfulness of an image is influenced by the adaptation of the visual system to natural and shuffled images with different degrees of saturation. In the experiment, observers first became adapted to several images with different levels of saturation and then their colorfulness perception of a test image was measured. The results show that their perception of colorfulness was influenced by their adaptation to the saturation of images. The effect was stronger following adaptation to natural images than to images consisting of a shuffled collage of randomized color blocks, which suggests that the naturalness of the spatial structure of an image affects the strength of the effect.     

Visual adjustments to temporal blur

After observers have adapted to an edge that is spatially blurred or sharpened, a focused edge appears too sharp or blurred, respectively. These adjustments to blur may play an important role in calibrating spatial sensitivity. We examined whether similar adjustments influence the perception of temporal edges, by measuring the appearance of a step change in the luminance of a uniform field after adapting to blurred or sharpened transitions. Stimuli were square-wave alternations (at 1 to 8 Hz) filtered by changing the slope of the amplitude spectrum. A two-alternative-forced-choice task was used to adjust the slope until it appeared as a step change, or until it matched the perceived transitions in a reference stimulus. Observers could accurately set the waveform to a square wave, but only at the slower alternation rates. However, these settings were strongly biased by prior adaptation to filtered stimuli, or when the stimuli were viewed within temporally filtered surrounds. Control experiments suggest that the latter induction effects result directly from the temporal blur and are not simply a consequence of brightness induction in the fields. These results suggest that adaptation and induction adjust visual coding so that images are focused not only in space but also in time.     

Photoelectrochemical properties of sol–gel-derived Ti1−xVxO2 solid solution film photoelectrodes

Ti_1−xV_xO₂ solid solution film photoelectrodes were prepared by the dip-coating sol–gel method. X-ray diffraction and X-ray photoelectron spectroscopy were employed to ensure the formation of the solid solution and their composition. Obvious photoresponses were observed in the visible region for the solid solution film electrodes with x0.05 and the red shift of the photoresponse was enhanced with increasing x. Moreover, the solid solution film electrodes were found to be photoelectrochemically stable. However, the onset potential of photocurrent shifted positively with increasing x. Band model of the solid solution was suggested to explain the effects of the vanadium incorporation on the photoelectrochemical properties.     

Visible Light Irradiation of [60]Fullerene Causes Killing and Initiation of Transformation in Balb/3T3 Cells

Cell transformation in vitro is a model of carcinogenesis in vivo. Two-stage transformation assay increases the sensitivity of cells to chemicals and permits detection of carcinogens acting as initiating agents. [60]Fullerene (C₆₀) was cytotoxic in BALB/3T3 cells when it was irradiated by visible light, but not without light irradiation. Under conditions when C₆₀ was cytotoxic, it acted as an initiating agent for cell transformation, but it did not act as a complete transforming agent. the initiating activity of visible-light-irradiated C₆₀ was statistically significant in a modified two-stage transformation assay including a procedure for replating cells treated by C₆₀ and light, but it was equivocal in the standard two-stage transformation assay.     

Effect of aluminium on the polymerization silicic acid in aqueous solution and the deposition of silica of silica

The effect of aluminium on the polymerization of silicic acid was studied at pH 7, 8 and 9 in the aluminium concentration range of 0–26 ppm (Al) by spectrophotometry, gel chromatography and ²⁷Al NMR. Retarding and accelerating effects of aluminium on the growth of polysilicic acid particles and on the reaction between monosilicic acid and polysilicic acid were observed by changing the pH. It is suggested that the accelerating effect on the reaction between polysilicic acid particles is due to the formation of aluminium hydroxide on the surface of polysilicic acid. The rate of decrease in the monosilicic acid concentration in the presence of aluminium was faster than that in the absence of aluminium at pH 9, because monosilicic acid could be adsorbed rapidly on the aluminium hydroxide. From the results it was presumed that the formation of aluminium hydroxide on the solid surface may accelerate the deposition of silicic acid from geothermal water.     

Chemical diffusion in the iridium-richA1 andL12 phases in the Ir-Nb system

The diffusion in iridium-rich Ir-Nb alloys has been studied by single-phase interdiffusion experiments. The chemical diffusion coefficient has been measured for the primary fcc solid-solution and theL1₂ ordered compound Ir₃Nb in the temperature range between 1650 and 1950 °C, using Ir/Ir-8Nb and Ir-26Nb/Ir-28Nb diffusion couples, respectively (numbers indicate mol%). While the chemical diffusion coefficient in the solid-solution phase is close to the tracer self-diffusion coefficient of pure iridium, the diffusion in the compound phase is extremely slow: the chemical diffusion coefficient is 1/40 to 1/50 of that in the solid solution. The low diffusion rate in the compound must be beneficial for high-temperature performance of refractory superalloys based on the Ir-Nb system. This article was presented at the Multicomponent-Multiphase Diffusion Symposium in Honor of Mysore A. Dayananda, which was held during TMS 2006, 135th Annual Meeting and Exhibition, March 12–16, 2006, in San Antonio, TX. The symposium was organized by Yongho Sohn of University of Central Florida, Carelyn E. Campbell of National Institute of Standards and Technology, Richard D. Sisson, Jr., of Worcester Polytechnic Institute, and John E. Morral of Ohio State University.     

Effect of impurity on dissolution behavior of simulated molybdenum cermet fuels

The effects of impurity Zr on dissolution behavior into nitric acid of sintered Mo pellets were investigated using simulated fuels to accumulate basic data and knowledge concerning the matrix of Mo-cermet fuels. Mo pellets containing 1– 10 mol% Zr were prepared by conventional powder metallurgical route. After characterization tests using optical microscopy (OM), X-ray diffraction and secondary electron microscopy-energy dispersive X-ray spectrometry (EDX), the sintered pellets were subjected to dissolution tests by nitric acid. The apparent dissolution rate of Mo pellets containing impurity Zr was found to be followed by the first-order chemical reaction form, which is generally known as a simple chemical reaction. The rate of dissolution of sintered Mo-cermet fuels by nitric acid was found to decrease with the increase of the amount of impurity Zr.     

Dehalogenation of polybrominated diphenyl ethers and polychlorinated biphenyl by bimetallic, impregnated, and nanoscale zerovalent iron

Nanoscale zerovalent iron particles (nZVI), bimetallic nanoparticles (nZVI/Pd), and nZVI/Pd impregnated activated carbon (nZVI/Pd-AC) composite particles were synthesized and investigated for their effectiveness to remove polybrominated diphenyl ethers (PBDEs) and/or polychlorinated biphenyls (PCBs). Palladization of nZVI promoted the dehalogenation kinetics for mono- to tri-BDEs and 2,3,4-trichlorobiphenyl (PCB 21). Compared to nZVI, the iron-normalized rate constants for nZVI/Pd were about 2-, 3-, and 4-orders of magnitude greater for tri-, di-, and mono-BDEs, respectively, with diphenyl ether as a main reaction product. The reaction kinetics and pathways suggest an H-atom transfer mechanism. The reaction pathways with nZVI/Pd favor preferential removal of para-halogens on PBDEs and PCBs. X-ray fluorescence mapping of nZVI/Pd-AC showed that Pd mainly deposits on the outer part of particles, while Fe was present throughout the activated carbon particles. While BDE 21 was sorbed onto activated carbon composites quickly, debromination was slower compared to reaction with freely dispersed nZVI/Pd. Our XPS and chemical data suggest about 7% of the total iron within the activated carbon was zerovalent, which shows the difficulty with in-situ synthesis of a significant fraction of zerovalent iron in the microporous material. Related factors that likely hinder the reaction with nZVI/Pd-AC are the heterogeneous distribution of nZVI and Pd on activated carbon and/or immobilization of hydrophobic organic contaminants at the adsorption sites thereby inhibiting contact with nZVI.     

Effects of the incorporation of silver and gold nanoparticles on the photoanodic properties of rose bengal sensitized TiO2 film electrodes prepared by sol-gel method

Rose bengal-deposited TiO₂ film electrodes bearing dispersed Ag or Au nanoparticles were prepared by the sol-gel method. The dye-induced visible region photoresponse of the electrodes decreased with increasing Ag content up to a mole ratio of Ag/TiO₂ = 0.0207, while the UV photoresponse increased. On the other hand, the dye-induced visible region photoresponse decreased to a less extent by incorporation of a larger amount of Au particles of Au/TiO₂ = 0.06, along with decreased UV photoresponse. The effects of the metal particles on the dye sensitization of the electrodes were discussed in terms of band edge fluctuation induced by the surface metal particles, Schottky barriers at TiO₂/metal interfaces, and surface plasma resonance.     

Analysis of indoor PM2.5 exposure in Asian countries using time use survey

Most household fuels used in Asian countries are solid fuels such as coal and biomass (firewood, crop residue and animal dung). The particulate matter (PM), CO, NOx and SOx produced through the combustion of these fuels inside the residence for cooking and heating has an adverse impact on people's health. PM 2.5 in particular, consisting of particles with an aerodynamic diameter of 2.5 μm or less, penetrates deep into the lungs and causes respiratory system and circulatory system diseases and so on. As a result, the World Health Organization (WHO) established guideline values for this type of particulate matter in 2005. In this study, the authors focused on PM 2.5 and estimated indoor exposure concentrations for PM 2.5 in 15 Asian countries. For each environment used for cooking, eating, heating and illumination in which people are present temporarily (microenvironment), exposure concentrations were estimated for individual cohorts categorized according to sex, age and occupation status. To establish the residence time in each microenvironment for each of the cohorts, data from time use surveys conducted in individual countries were used. China had the highest estimate for average exposure concentration in microenvironment used for cooking at 427.5 μg/m³ , followed by Nepal, Laos and India at 285.2 μg/m³, 266.3 μg/m³ and 205.7 μg/m³ , respectively. The study found that, in each country, the PM2.5 exposure concentration was highest for children and unemployed women between the ages of 35 and 64. The study also found that the exposure concentration for individual cohorts in each country was greatly affected by people's use of time indoors. Because differences in individual daily life activities were reflected in the use of time and linked to an assessment of exposure to indoor air-polluting substances, the study enabled detailed assessment of the impact of exposure.