Planar AlGaAs/GaAs heterojunction bipolar transistors fabricatedusing selective W-CVD

The authors describe a planar process for the AlGaAs/GaAs HBTs in which collector vias are buried selectively, even to the base layers, with chemical vapor deposited tungsten (CVD-W) films. By using WF₆ /SiH₄ chemistry, W could be deposited on Pt films, which were overlapped 50 nm thick on the AuGe-based collector electrodes, without depositing W on the surrounding SiO₂ layers. Current gains of planar HBTs with 3.5-μm×3.5-μm emitters were up to 150, for a collector current density of about 2.5×10⁴ A/cm²     

Thieno[2,3-d]pyrimidine-3-acetic acids. A new class of nonpeptide endothelin receptor antagonists

On the basis of structural information for the cyclic hexapeptide endothelin (ET) receptor antagonist, TAK-044, a series of thieno[2,3-d]pyrimidine-2,4-dione derivatives bearing a carboxyl group and aromatic rings that were important for receptor binding were designed, synthesized, and evaluated for ET receptor binding affinities and inhibitory activities against ET-induced vasoconstriction. Optimization of each substituent in the thieno[2,3-d]pyrimidine ring led to the discovery of a novel and potent nonpeptide ET receptor antagonist, 6-(4-methoxymethoxyphenyl)-5-methylsulfonylaminomethyl-1-(2- methylthiobenzyl)-2,4-dioxo-1,2,3,4-tetrahydrothieno[2,3-d]p yrimidine-3- acetic acid (32 g), which binded to human ETA and ETB receptor subtypes with affinities (IC50) of 7.6 and 100 nM, respectively. Compound 32 g effectively antagonized ET-induced vasoconstriction and the inhibitory effect mediated by the ETB receptor was more potent than that of bosentan, while the inhibitory effect mediated by the ETA receptor was slightly less potent than that of bosentan.     

Plasma lens experiment at the final focus test beam

The proposed plasma lens experiment at the Final focus Test Beam (FFTB) facility of the Stanford Linear Accelerator Center has been approved by the adminstration. The experiment would allow the examination of plasma focusing devices for particle beams in the parameter regime of interest to future high-energy colliders. It is expected to lead to compact plasma lens designs capable of focusing the beam to unprecedented small spot sizes.     

Studies on calcium antagonistic and alpha 1-adrenergic receptor blocking activities of monatepil maleate, its metabolites and their enantiomers

The calcium antagonistic and alpha 1-adrenergic receptor blocking activities of monatepil maleate (CAS 103377-41-9, (+/-)-N-(6,11-dihydrodibenzo [b, e] thiepin-11-yl) -4-(4-fluorophenyl)-1-piperazinebutanamide monomaleate, AJ-2615), a novel calcium antagonist, its metabolites and their enantiomers were studied in vitro. Monatepil maleate inhibited calcium-induced contractions of rat thoracic aorta (pA2 = 8.71) and l-phenylephrine-induced contractions of rabbit superior mesenteric artery (IC50 = 56.6 nmol/l). The calcium antagonistic activities of the metabolites of monatepil maleate (AJ-2615-sulfoxide A, AJ-2615-sulfoxide B and AJ-2615-sulfone) were 1/10 of that of monatepil maleate. However, their alpha 1-adrenergic receptor blocking activities were similar to or slightly more potent than that of monatepil maleate. The potencies of the calcium antagonistic activities of monatepil maleate and its enantiomers [(S)-AJ-2615 and (R)-AJ-2615] were in the order of (S)-AJ-2615 > monatepil maleate > (R)-AJ-2615 whereas no difference was observed among them in alpha 1-adrenergic receptor blocking activity. In calcium antagonistic and alpha 1-adrenergic receptor blocking activities, there was no difference between the enantiomers of monatepil maleate metabolites. In conclusion, there was a difference with several times in calcium antagonistic activity between the two enantiomers of monatepil maleate but not in their alpha 1-adrenergic receptor blocking activity.     

Electrochemical characteristics for redox systems at nano-honeycomb diamond

Electrochemical characteristics for several redox systems at diamond films with highly ordered nanometer-scale cylindrical pores (‘nano-honeycombs’) were examined with cyclic voltammetry (CV) and electrochemical impedance measurements. The cyclic voltammetric anodic-cathodic peak separations for these nano-honeycomb electrodes were in the same range as those for polished polycrystalline diamond films, indicating that the involvement of the oxygen-terminated surface of the nano-pore walls, which should give rise to large peak separations for certain redox couples was only slight. Moreover, the peak currents in the CV were not enhanced to the extent expected on the basis of the roughness factors of the nano-honeycomb films. Ac impedance plots results indicated the existence of a concentration gradient of the reactant in the nano-pores, which is in agreement with theoretical predictions for charge transfer reactions in porous electrodes. The average concentration of the reactant (Fe^2+/3+) inside the nano-pores was a factor of ca. 80 lower than that in the bulk electrolyte. The results of the impedance analysis also indicated an increase in the reaction resistances with decreasing pore diameters.     

Different feeding and gustatory responses to ecdysone and 20-hydroxyecdysone by larvae of the silkworm,Bombyx mori

The feeding and gustatory responses to ecdysone and 20-hydroxyecdysone were investigated in the silkworm,Bombyx mori. 20-Hydroxyecdysone reduced feeding response strongly in fourth- and fifth-instar larvae, whereas ecdysone had no effect on feeding response. 20-Hydroxyecdysone stimulated the R receptor, the receptor to feeding deterrents, to a great degree. By contrast, ecdysone was much less effective for stimulating the R receptor. These results indicate that ecdysone and 20-hydroxyecdysone have different effects on feeding response due to different interactions with mouthpart chemoreceptors.     

Effect of perchloric acid on the molecular weight and yield of poly-THF

Polytetramethylene glycol (molecular weight range 1000–8000) was prepared by the polymerization of tetrahydrofuran (THF) using a binary catalyst system of fuming sulfuric acid and perchloric acid. When 28% fuming sulfuric acid alone was used as the catalyst, the average molecular weight of polymer was low, the maximum value being 1000–1100. By the combination of fuming sulfuric acid with a small amount of perchloric acid, the average molecular weight of the polymer was increased to about 8000. Furthermore, the molecular weight was readily controlled in the range of 1000 to 8000 by varying the amount of the binary catalyst.     

Silica-supported cobalt catalysts for the selective reduction of nitrogen monoxide with propene

Catalytic behavior of silica-supported transition metals for NO reduction with propene in the presence of oxygen was investigated. While both silica and cobalt oxides did not show any activity for the selective NO reduction, impregnated CoO/SiO₂ prepared from cobalt acetate showed good activity although the preparation conditions had significant effect on the activity. It was suggested that highly dispersed surface Co²⁺ ions on silica are responsible for the catalytic activity.     

Synthesis of Super-Microporous Aluminosilicate Having Excellent Water Vapor Adsorption Property as an Adsorbent for an Adsorption Heat-Pump

The synthesis of super-microporous aluminosilicate with a pore diameter of 14.6 Å has been achieved, by means of synthesis under specified conditions with a skeletal material comprising TMOS and a small quantity of sodium aluminate, and a conventional alkyl-trimethylammonium halide (C₁₀TMABr) as a template. This super-microporous aluminosilicate has an adsorption capacity of 0.2 ml/g at a relative water vapor pressure of 0.2, and thus is promising as an adsorbent for an adsorption heat-pump.