Studies on calcium antagonistic and alpha 1-adrenergic receptor blocking activities of monatepil maleate, its metabolites and their enantiomers

The calcium antagonistic and alpha 1-adrenergic receptor blocking activities of monatepil maleate (CAS 103377-41-9, (+/-)-N-(6,11-dihydrodibenzo [b, e] thiepin-11-yl) -4-(4-fluorophenyl)-1-piperazinebutanamide monomaleate, AJ-2615), a novel calcium antagonist, its metabolites and their enantiomers were studied in vitro. Monatepil maleate inhibited calcium-induced contractions of rat thoracic aorta (pA2 = 8.71) and l-phenylephrine-induced contractions of rabbit superior mesenteric artery (IC50 = 56.6 nmol/l). The calcium antagonistic activities of the metabolites of monatepil maleate (AJ-2615-sulfoxide A, AJ-2615-sulfoxide B and AJ-2615-sulfone) were 1/10 of that of monatepil maleate. However, their alpha 1-adrenergic receptor blocking activities were similar to or slightly more potent than that of monatepil maleate. The potencies of the calcium antagonistic activities of monatepil maleate and its enantiomers [(S)-AJ-2615 and (R)-AJ-2615] were in the order of (S)-AJ-2615 > monatepil maleate > (R)-AJ-2615 whereas no difference was observed among them in alpha 1-adrenergic receptor blocking activity. In calcium antagonistic and alpha 1-adrenergic receptor blocking activities, there was no difference between the enantiomers of monatepil maleate metabolites. In conclusion, there was a difference with several times in calcium antagonistic activity between the two enantiomers of monatepil maleate but not in their alpha 1-adrenergic receptor blocking activity.     

Numerical investigation of zoomable holographic projection without a zoom lens

Holographic projection is for laser displays and has the merits of being aberration free, producing high‐contrast images, having the ability of color reconstruction with one spatial light modulator, and so on. In this paper, we propose a zoomable holographic projection without using a zoom lens and verify the proposed method by using numerical simulation. Although such a system can be readily realized to use the features of holography, which is capable of recording a large image exceeding the hologram size, the required calculation is very time consuming. For acceleration, we used shifted Fresnel diffraction for setting different sampling rates on a hologram and projected image. The proposed method can project any zoom‐in and zoom‐out image between zeroth‐order and first‐order lights, and the processing time and required memory for the zoom are constant.     

Stromal CCL5 Promotes Breast Cancer Progression by Interacting with CCR3 in Tumor Cells

Chemokines secreted from stromal cells have important roles for interactions with carcinoma cells and regulating tumor progression. C-C motif chemokine ligand (CCL) 5 is expressed in various types of stromal cells and associated with tumor progression, interacting with C-C chemokine receptor (CCR) 1, 3 and 5 expressed in tumor cells. However, the expression on CCL5 and its receptors have so far not been well-examined in human breast carcinoma tissues. We therefore immunolocalized CCL5, as well as CCR1, 3 and 5, in 111 human breast carcinoma tissues and correlated them with clinicopathological characteristics. Stromal CCL5 immunoreactivity was significantly correlated with the aggressive phenotype of breast carcinomas. Importantly, this tendency was observed especially in the CCR3-positive group. Furthermore, the risk of recurrence was significantly higher in the patients with breast carcinomas positive for CCL5 and CCR3 but negative for CCR1 and CCR5, as compared with other patients. In summary, the CCL5-CCR3 axis might contribute to a worse prognosis in breast cancer patients, and these findings will contribute to a better understanding of the significance of the CCL5/CCRs axis in breast carcinoma microenvironment.     

Electrochemical characteristics for redox systems at nano-honeycomb diamond

Electrochemical characteristics for several redox systems at diamond films with highly ordered nanometer-scale cylindrical pores (‘nano-honeycombs’) were examined with cyclic voltammetry (CV) and electrochemical impedance measurements. The cyclic voltammetric anodic-cathodic peak separations for these nano-honeycomb electrodes were in the same range as those for polished polycrystalline diamond films, indicating that the involvement of the oxygen-terminated surface of the nano-pore walls, which should give rise to large peak separations for certain redox couples was only slight. Moreover, the peak currents in the CV were not enhanced to the extent expected on the basis of the roughness factors of the nano-honeycomb films. Ac impedance plots results indicated the existence of a concentration gradient of the reactant in the nano-pores, which is in agreement with theoretical predictions for charge transfer reactions in porous electrodes. The average concentration of the reactant (Fe^2+/3+) inside the nano-pores was a factor of ca. 80 lower than that in the bulk electrolyte. The results of the impedance analysis also indicated an increase in the reaction resistances with decreasing pore diameters.     

Different feeding and gustatory responses to ecdysone and 20-hydroxyecdysone by larvae of the silkworm,Bombyx mori

The feeding and gustatory responses to ecdysone and 20-hydroxyecdysone were investigated in the silkworm,Bombyx mori. 20-Hydroxyecdysone reduced feeding response strongly in fourth- and fifth-instar larvae, whereas ecdysone had no effect on feeding response. 20-Hydroxyecdysone stimulated the R receptor, the receptor to feeding deterrents, to a great degree. By contrast, ecdysone was much less effective for stimulating the R receptor. These results indicate that ecdysone and 20-hydroxyecdysone have different effects on feeding response due to different interactions with mouthpart chemoreceptors.     

Vinyl polymerization by metal complexes. XVIII. Kinetics of the polymerization of acrylonitrile initiated by imidazole-copper-(II) complexes

A study on the kinetics and mechanism of the polymerization of acrylonitrile initiated by imidazole and 2-substituted imidazole-copper-(II) complexes was made in dimethyl sulfoxide solution at 40–70°C. The rate of polymerization, Rp, could be expressed as follows: The overall activation energies of these polymerization processes are in a range from 14.2 to 69.1 KJ mole^-1. From the data of electronic spectra and electron paramagnetic resonance, it was confirmed that the polymerization in question could be initiated by free radicals which were formed by the reduction of copper-(II) complex to copper-(I) complex, and the latter formed a new complex with polyacrylonitrile resulted.     

Concentration of acetic acid in sulfite pulp evaporation drain by reverse osmosis

The evaporation drain of sulfite pulp spent liquor contains few volatile fatty acids, most of which is acetic acid. The main objective of this study is to recover acetic acid as the concentrated solution (about 4%), which could be used as a culture medium of the yeast. As acetic acid can easily pass through the cellulose acetate membrane, SP drains neutralized by NaOH, NH₄OH and Ca(OH)₂ were used as the feed solutions. In all cases, concentration by reverse osmosis was successfully carried out provided the appropriate pretreatment was employed. The recovery of acetic acid was 95.6, 90.5 and 98.2% for Na-, NH₄-, and Ca-drain, respectively. In addition, the recovered (permeated) water may be used as an industrial one.     

Effect of perchloric acid on the molecular weight and yield of poly-THF

Polytetramethylene glycol (molecular weight range 1000–8000) was prepared by the polymerization of tetrahydrofuran (THF) using a binary catalyst system of fuming sulfuric acid and perchloric acid. When 28% fuming sulfuric acid alone was used as the catalyst, the average molecular weight of polymer was low, the maximum value being 1000–1100. By the combination of fuming sulfuric acid with a small amount of perchloric acid, the average molecular weight of the polymer was increased to about 8000. Furthermore, the molecular weight was readily controlled in the range of 1000 to 8000 by varying the amount of the binary catalyst.     

Silica-supported cobalt catalysts for the selective reduction of nitrogen monoxide with propene

Catalytic behavior of silica-supported transition metals for NO reduction with propene in the presence of oxygen was investigated. While both silica and cobalt oxides did not show any activity for the selective NO reduction, impregnated CoO/SiO₂ prepared from cobalt acetate showed good activity although the preparation conditions had significant effect on the activity. It was suggested that highly dispersed surface Co²⁺ ions on silica are responsible for the catalytic activity.