波形碳纳米管增强复合材料的有效刚度和局部应力的宏微观均质化数值模拟

采用分子动力学方法简化的碳纳米管等效纤维模型,利用具有精确周期性边界条件的均质化理论和宏微观均质化法分析正弦波形非连续碳纳米管的有效刚度和局部应力分布规律.结果表明,纳米增强复合材料的有效刚度和局部应力对碳纳米管的波形非常敏感,碳纳米管稍有弯曲就会导致复合材料有效刚度降低和应力传递能力的下降,为揭示复合材料中碳纳米管的增强机制和改善增强效果提供理论依据.     

Selective vapor phase hydroformylation of ethylene over cluster-derived cobalt catalyst

Vapor phase hydroformylation of ethylene was studied with silica-supported metal catalysts. A cobalt metal catalyst derived from Co₂(CO)₈ gave propanal and its derivatives in as high selectivity of about 36% as Rh/SiO₂ catalyst under the reaction conditions of 1.1 MPa of a gas-mixture of ArCOC₂H₄H₂ = 1333 at 423–503 K. On the other hand, conventional cobalt catalysts derived from cobalt nitrate, chloride, or acetate, and other noble metal catalysts (Pd/SiO₂ and Ir/SiO₂) produced mainly ethane.     

Colloidal Processing and Mechanical Properties of Whisker-Reinforced Mullite Matrix Composites

Aqueous colloidal suspensions in the two systems of CVD-processed ultrafine mullite powder (<0.1 μm), -Si₃N₄ whisker and -mullite whisker, were prepared near the isoelectric point of mullite (pH 7.0) to prevent cracking during drying of wet green compacts consolidated by filtration. The freeze-dried porous green compacts were hot-pressed with a carbon die at 1500°C for 1 h at a pressure of 39 MPa in N₂ atmosphere. The relative densities of the mullite matrix composites with whiskers of 0 to 10 vol% were in the range of 95.2% to 99.8%. Increasing the fraction of Si₃N₄ whisker increased the density, flexural strength, and fracture toughness of the hot-pressed composites. On the other hand, addition of the mullite whisker increased the fracture toughness but decreased the density and strength of the composites.     

Resistivity, Hall coefficient, magnetoresistance, and microtexture of cellulose carbon films

Dense carbon films of about 20 μm in thickness were prepared from a commercially available cellulose film of 40 μm thick by heat treatment up to 900°C. Carbon films thus obtained were heat treated at temperatures between 1800 and 3000°C for 30–60 min. The heat-treated carbon films were investigated by the measurements of resistivity, Hall coefficient and magnetoresistance at liquid nitrogen temperature. Reflected and transmitted X-ray diffraction experiments and observations by a high-resolution scanning electron microscope (SEM) were also carried out. The results of the resistivity and Hall coefficient for high-temperature-treated specimens indicated that the carbonized film was more graphitizable than bulk glass-like carbons. The magnetoresistance and X-ray diffraction profiles for the high-temperature-treated specimens suggested that each of these specimens substantially consisted of the matrix of granular microtexture and the graphite layer skin. The skin was clearly observed by SEM for the specimens heat-treated at 2800 and 3000°C and their thickness was 100–300 nm.     

Excitation density dependence of luminescence spectrum of electron-hole plasma in diamond

Time-resolved band edge luminescence spectrum in IIa diamond has been measured with the 5th harmonics of a pulsed YAG laser (5.82 eV) and an ICCD image intensifier of 5 ns gate width at 290 K. The time-resolved luminescence spectrum is decomposed into three components of free exciton (FE), excitonic complex (EC) and electron-hole plasma (EHP). The decay times of the FE and EC luminescence are 45 and 27 ns, respectively and that of the EHP luminescence has been seen to be shorter than the gate width, 5 ns. The low energy onset of the EHP luminescence spectrum has been observed to decrease with increasing excitation density and attains the onset of the electron-hole drop luminescence spectrum at the excitation density of 0.6 J/cm², at which the electron-hole pair density is 1.2 × 10²⁰ cm^? 3. Furthermore, the excitation density dependences of the FE, EC and EHP luminescence intensities are explained with the percolation theory.     

ASYMPTOTIC PROPERTIES OF THE SAMPLE AUTOCORRELATIONS AND PARTIAL AUTOCORRELATIONS OF A MULTIPLICATIVE ARIMA PROCESS

Abstract. We shall investigate the asymptotic behaviour of the sample autocorrelations and partial autocorrelations of a multiplicative ARIMA process and derive their limiting distributions. Some simulations are presented to illustrate the results obtained.     

Application of electrospray ionization ion trap/time-of-flight mass spectrometry for chemically-synthesized small RNAs

In this study, we have demonstrated an accurate and rapid small RNA analytical method with both sequence determination and detailed modification analysis by electrospray ionization-ion trap/time-of-flight mass spectrometry (ESI-IT/TOFMS). To develop this ideal method, we have examined the performance of ESI-IT/TOFMS using various chemically-synthesized model sequences of modified or unmodified microRNAs (miRNAs). The deconvoluted mass of a 22-nucleotide (nt) miRNA was obtained from a multiply charged precursor ion (MS(1)). The ion exhibited high mass accuracy (< 7 ppm) and high mass resolution (a value of m/Δm=10,000) and was therefore very useful in RNA composition assignment. The optimized MS(2) method using ion trap collision-induced dissociation, as well as automatic annotation analysis of product ions based on the accurate mass information, enabled the precise sequencing determination of intact miRNAs. Further, the detailed structural analysis of 3'-terminal modified nucleic acid in intact methylated miRNA was carried out using the MS(3) capability of the hybrid IT/TOFMS. The direct infusion method also provided a high throughput and good sensitivity because the analytical time and sample concentration needed in a series of experiments with reliable data were only 3 min and 100 nM, respectively. This study provides a novel approach for characterizing the intact chemically-synthesized small RNA without chemical and enzymatic digestions and would be widely applicable for the structural analysis of complicated modified small RNAs.     

Evaluation of photo-induced cellular damage using photoautotrophic cultures of puk-bung hairy roots as a sensing tool

In photoautotrophic cultures of pak-bung hairy roots, strong light irradiation (22 W/m²) increased the content of reactive oxygen species (ROS) in the cells, resulting in chlorophyll (Chl) degradation and DNA injury. The Chl degradation rate, R_D, can be used as a parameter to measure the cellular damage caused by photo-induced stress. The presence of the antioxidants ascorbic acid, chlorogenic acid or catechin reduced the R_D, while lowering the content of ROS and moderating the DNA injury.     

Finite-time settling adaptive observer for linear discrete-time systems

This paper deals with a design method for an adaptive scheme which would identify the parameters and observe the state of any unknown single-input single-output linear discrete-time systems using only input-output data. Kreisselmeier's parametrized system [5] is used instead of the original system. Then the parameter identification process and the state observation process are well separated. To accelerate the convergence rate of the estimates, a finite-time settling scheme is proposed. It is shown that the estimates obtained converges to true values at k = 3n ?1, where k is the discrete time and n is the order of system. A numerical example is given to indicate acceptable performance of the proposed scheme.     

Transient response of cylindrical shells to localized heat sources

An exact analysis of the dynamic problem on the thermal displacements and stresses of cylindrical shells subjected to instantaneous heating is carried out. Equations of motion for cylindrical shells, including the thermal effects, are reduced and solved by using the Fourier and Laplace transformation methods, after obtaining the temperature distribution determined from the nonstationary equation of heat conduction for a shell under a prescribed temperature field. Numerical results are presented for the thermal displacement and stresses due to the time variation together with the quasistatic ones.