In vitro determination of basement membrane invasion predicts liver metastases in human gastrointestinal carcinoma

We described previously (H. Imamura, et al., Cancer Res., 54: 3620-3624, 1994) a quantitative and reproducible 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay for tumor cell invasiveness that uses a water-repellent, paraffin-treated Chemotaxicell chamber to produce a uniform Matrigel layer. In the present experiments, we studied 71 human gastrointestinal carcinomas, including 53 maintained as xenografts in nude mice and 18 fresh surgical specimens. We found a correlation between metastatic behavior and the percent invasion (PI) calculated from the MTT assay. Tumors producing liver metastases had a significantly higher PI than did tumors without liver metastases (P < 0.01), and seven of nine fresh tumors with a PI greater than 1.0 showed liver metastases within 2 years. No significant correlations were noted between the PI and clinicopathological factors. In the tumor xenografts, type IV collagenase activity was significantly higher in tumors with clinically evident liver metastases than in those without liver metastases (P < 0.05). Colorectal carcinomas with liver metastases and a high PI showed higher expression of matrix metalloproteinase 9 than matrix metalloproteinase 2 as assessed by gelatin zymography. Thus, the invasion-MTT assay is clinically useful for predicting liver metastases. Type IV collagenase plays an important role in the development of liver metastases from human gastrointestinal carcinoma.     

Dysfunction of nitric oxide induces protein kinase C activation resulting in vasospasm after subarachnoid hemorrhage

We hypothesize that the interaction between protein kinase C (PKC) and nitric oxide (NO) plays a role in the modulation of cerebral vascular tone, and the disturbance of this interaction following subarachnoid hemorrhage (SAH) results in vasospasm. To prove this hypothesis with direct evidence, PKC activities of smooth muscle cells of canine basilar arteries in the control and in the SAH groups were measured by an enzyme immunoassay method. N omega-nitro-L arginine (L-NA), an inhibitor of NO production, enhanced PKC activity. This enhancement was inhibited neither by 8-bromo-guanosine 3',5'-cyclic monophosphate (8-bromo-cGMP) nor SIN-1, a NO releasing agent. PKC activity in the SAH was significantly higher than in the control; however, no further enhancement was produced with L-NA. In the SAH, PKC activity was not inhibited either by 8-bromo-cGMP or SIN-1. We conclude that NO maintains an appropriate vascular tone through inactivation of PKC, and that this effect is disturbed following SAH, resulting in PKC-dependent vascular contraction, such as vasospasm. On the other hand, once PKC has been activated, NO precursors do not inhibit PKC. These facts indicate NO inactivates PKC through the inhibition of phosphatidylinositol breakdown.     

Effects of Polymer Decomposition Behavior on Thermal Debinding Process in Metal Injection Molding

The thermal degradation mechanism of several polymers was studied for the metal injection molding (MIM) process. The depolymerization type polymers (polybutyl-methacrylate (PBMA) and polyacetal (POM)) had fast thermal degradation speed. On the other hand, the thermal degradation of the random type polymers (polypropylene (PP) and ethylene-vinyl acetate (EVA)) was influenced by the type of debinding atmosphere (air and nitrogen). In the thermal debinding process, it was clear that the thermal degradation speed of the feedstocks that contained more than 35.3 vol.% of depolymerization type polymers was faster than that of the feedstocks which contained more than 8.5 vol.% of random type polymers. For the feedstocks that contained more than 35.3 vol.% of POM and PBMA, the sintered test pieces had less than 30 ppm of carbon and the sintering relative density of the sintered parts was in the range of 95.5 to 96.5%. The debinding ratio of the test pieces decreased with an increase in the PP content. However, the thermal degradation gases of POM and PBMA (without any PP) caused some cracks and holes when a heating rate greater than 30°C hr^-1 was used to heat the specimen to the 270-300°C temperature range.     

Hand-mirror cells acute lymphoblastic leukemia (L3)

To our knowledge, this report represents the first confirmed case in Japan of a 15-year-old boy with acute lymphoblastic leukemia (ALL).L3 with hand-mirror cells (HMC) in the bone marrow. HMC lymphoid leukemia is an unusual variant of ALL in which the bone marrow lymphoblasts manifest distinctive hand-mirror morphologic features. HMC lymphoblast is characterized by an asymmetric foot-like cytoplasmic process that extends from the portion of the cell, thus giving it the light-microscopic appearance responsible for its name. Besides ALL, HMC has been reported in acute myeloblastic leukemia (AML), blastic crisis of chronic myelogenous leukemia, non-Hodgkin's lymphoma, and infectious mononucleosis. HMC has been reported to be prevalent in ALL.L1 and L2 as compared with L3.     

Velocity and turbulence measurements in a cylindrical bath subject to centric bottom gas injection

Laser Doppler velocimeter (LDV) measurements were made to clarify the fluid flow behavior in a bath subject to centric bottom gas injection. Correlations of the axial mean velocity and turbulence components in the gas-liquid two-phase flow region,i.e., in the bubbling jet region, were proposed as functions of the inner diameter of nozzle, gas flow rate, and densities of gas and liquid. Measured values of the flow rate, momentum, and kinetic energy of water rising upward were approximated satisfactorily by these empirical correlations. In addition, the Reynolds shear stress was calculated and compared with measured values. Formerly Graduate Student, Osaka University,     

Potential of renewable energy sources and its applications in Yakushima Island

A study was carried out to see if the potential of renewable energy sources other than hy droelectric power, such as wind, photovoltaic, solar thermal, biomass and waste energy sources, can meet the current energy consumption in Yakushima. The current electricity consumption can be covered by wind and photovoltaic energy sources. The total potential of wind and photovoltaic energy sources is 5.4 times as much as the current electricity consumption. LP gas and kerosene can be replaced by solar thermal and biogas energy. The potential of plant biomass and municipal waste is not sufficient (approximately one third) to cover the rest of the fossil fuels (gasoline, diesel oil and heavy oil). Also, plant biomass and municipal waste must be converted into fluid form. This shortage can be covered by the po tential of wind and photovoltaic energy sources. We also investigated the possibility of tourism expansion using the potential of wind and photovoltaic energy sources. Taking into account three types of capacity (energy, accommodation and transportation), Yakushima can accept approximately four times as many tourists as the current number of tourists.     

Azimuthal wave number control of oscillatory thermocapillary convection in a liquid bridge

Thermocapillary convection in a half‐zone liquid bridge of high Prandtl number fluid is widely known to exhibit a three‐dimensional oscillatory flow after the onset of oscillation. The oscillatory flow presents ‘standing’ and ‘traveling’ flows depending upon the temperature difference between the top and bottom rods. In the oscillatory state, the flow shows a modal structure with an azimuthal wave number that depends on the aspect ratio of the liquid bridge and the intensity of the thermocapillarity expressed by the Marangoni number. The present study attempted to control the azimuthal wave number by heating the free surface locally with a prescribed frequency and intensity. The flow in the liquid bridge exhibited different modal structures depending on the heating conditions and a relationship between the frequency and the modal structure was obtained. © 2005 Wiley Periodicals, Inc. Heat Trans Asian Res, 34(7): 460–469, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20086     

MRI of groove pancreatitis

PURPOSE: The purpose of this work is to describe the findings on MRI in patients with groove pancreatitis, a specific form of chronic pancreatitis affecting the groove between the pancreatic head, the duodenum, and the common bile duct. METHOD: MR images, including MR cholangiopancreatography, of five patients with groove pancreatitis were reviewed. Three patients underwent pancreatoduodenectomy due to serve duodenal stenosis, and the MR findings were compared to the histologic findings. RESULTS: A sheet-like mass was demonstrated between the pancreatic head and the duodenum in all patients. The masses were hypointense relative to pancreatic parenchyma on T1-weighted images and iso- to slightly hyperintense on T2-weighted images. After administration of Gd-DTPA, the masses showed delayed enhancement. Histologically, fibrous scar tissue was detected in the groove. CONCLUSION: MR images can clearly demonstrate the fibrous tissue in the groove in groove pancreatitis, and MR cholangiopancreatography can also provide useful information.     

Analysis on hopping mechanism of planetary robotic vehicle by microgravity experiments

For future exploration missions to small planetary bodies, in-situ surface observation by robots would be a promising method to investigate the target body whose surface gravity is very small. The authors have researched the mobility system under the microgravity environment and proposed a new mobile system which drives a robot by hopping. Due to the uncertainty of the escape velocity from the target small body, the hop velocity of the robot has to be controlled on-board. This paper proposes a velocity control method of the hopping mechanism, which was evaluated by microgravity experiments and compared with numerical simulation analyses.