Anodic Dissolution of Uranium Mononitride in Lithium Chloride-Potassium Chloride Eutectic Melt

Uranium-plutonium nitride is a candidate fuel for fast reactors, but its major drawback is ¹⁴C formation from natural nitrogen. One would probably have to use highly ¹⁵N-enriched nitrogen. A pyrochemical process with molten-salt electroreflning has been proposed as a means to increase the nuclear proliferation resistance of the fuel cycle. Molten-salt electroreflning could also be applied to nitride fuels to make possible the recycling of ¹⁵N. The anodic dissolution behavior of UN in LiCI-KCI melt was studied to provide the basis for a feasibility study of electroreflning of irradiated nitride fuels.     

Selective O-methylation of phenol with dimethyl carbonate over X-zeolites

The O-methylation of phenol with dimethyl carbonate proceeds selectively in the vapor phase over alkali ion exchanged X-zeolites. Thus, a 76% yield of anisole was obtained with a 93% selectivity over NaX at 553 K. The participation of basic sites in the O-methylation is suggested.     

Evaluation for distance learning scheme on distributed multiple server system

A distributed multiple server system is designed and implemented with Web-DB based services for distance learning as well as emergency communication. The system has employed multiple servers located in a distributed campus network environment. Each server of the system has multi-core processors. With so-called “server virtualization” technology, some programs are executed in parallel (on the virtual servers) so that such a system can efficiently perform several functions. For example, two or more application services can be performed simultaneously as “cloud services” on the whole system. The system can provide distance learning scheme for educational tool, at the same time it can also support Web-based surveillance facilities for emergency contact. With qualitative and quantitative approach, trial evaluation of system has been performed in some classrooms of distributed campus. And users can obtain some good results from the above evaluation.     

A negative resist for KrF excimer laser lithography

The design and preparation of a series of negative resists for KrF excimer laser lithography are described. Each resist is composed of poly(hydroxystyrene) and an aromatic azide. The base resin shows high transmittance of 62%/μm at 248 nm, when p-ethylphenyl p-azidophenylsulfonate. 4-azido-4α-methoxy-chalcone, 1-(4 azidobenzylidene)-3-(α-hydroxy-4-azidobenzyl)-indene, 4,4α-diazido-3,3α-dimethoxybiphenyl, or 1-(4-azidostyryl)-5, 5-dimethyl-2-cyclohexen-1-one is employed as a sensitizer. These azides are obtained by red-shifting the absorption maxima to lower energy regions than the exposing wavelength of 248 nm. Transmittance of resists can be controlled from 10 to 30%. The resist is exposed with a KrF excimer laser stepper and developed in an alkaline solution. Sensitivities of about 15 mJ/cm² are observed. A good, subhalf-micron resist profile is achieved. The photochemical reaction mechanisms of poly(hydroxystyrene) and 4,4α-diazido-3,3α-dimethoxybiphenyl were studied at 248 nm and 313 nm exposure. Quantum yield for photodecomposition at 248 nm is seven times larger than that at 313 nm, but dissolution-inhibition effects are larger at 313 nm exposure. Consequently, the resist shows higher sensitivity at 313 nm than at 248 nm.     

The effects of Ni and Li doping on the performance of lithium manganese oxide material for lithium secondary batteries

Layered Li_0.7[M_1/6Mn_5/6]O₂ (M=Li, Ni) was synthesized using a sol-gel method. P2-Na_0.7[M_1/6Mn_5/6]O₂ precursor was first synthesized by a sol-gel method, and then O2-Li_0.7[M_1/6Mn_5/6]O₂ was prepared by an ion exchange of Li for Na in P2-Na_0.7[M_1/6Mn_5/6]O₂ precursor. From charge/discharge curves, it was seen that Li_0.7[Li_1/6Mn_5/6]O₂ has two plateaus similar to those observed from a spinel structure, but Li_0.7[Ni_1/6Mn_5/6]O₂ holds a single plateau as observed from a typical layered structure. It was considered that Li_0.7[Li_1/6Mn_5/6]O₂ undergoes a phase transformation from layered to spinel structure during the charge/discharge cycle, but Li_0.7[Ni_1/6Mn_5/6]O₂ maintains O2-layered structure after the cycles. Li_0.7[Ni_1/6Mn_5/6]O₂ was higher in discharge capacity and retention rate than Li_0.7[Li_1/6Mn_5/6]O₂.     

Preparation of Porous Ceramics with Calcium Metaphosphate Fiber Skeleton for Biomedical Use

High-strength calcium metaphosphate fibers for biomedical applications are extracted from crystallized products of calcium ultraphosphate glasses by aqueous leaching. In the present work, new types of porous ceramics with a skeleton composed of the crystalline fibers are prepared by heating the fibrous products extracted. The fibers in the ceramic are interlinked to each other by glassy phases formed during the heating. This porous material has a large porosity of >60%. The surface of the skeleton can be successfully converted into new calcium phosphate phases such as apatite by heating the porous material treated with a molten salt mixture of CaCl₂-Ca(NO₃)₂.     

Preparation of Aluminum Nitride Powder from Aluminum Polynuclear Complexes

AIN powder was synthesized from aluminum polynuclear complexes. Basic aluminum chloride and basic aluminum lactate were used as the aluminum polynuclear complexes. These starting materials and glucose were dissolved in water and mixed homogeneously. AIN powder was obtained by calcining after drying and precalcining at 800°C under nitrogen gas flow. Then excess carbon was removed by firing in air. Nitridation in the system was investigated and compared with that in the alumina–carbon black system. It was found that in our reaction system nitridation began and proceeded at lower calcination temperatures above 1200°C than in the alumina–carbon black system. Using aluminum polynuclear complexes, AIN was synthesized through the nitridation of γ-alumina and produced in a very fine and sharp particle size distribution.     

Photocatalytic microreactor study using TiO2-coated porous ceramics

Two kinds of porous ceramic disks, having through-holes with diameters of 0.1 and 0.05 mm, were coated with TiO₂ using two different starting solutions: titanyl(IV)acetylacetonate and a commercial titania sol (STS-01). The morphology of these porous ceramics before and after TiO₂ coating was observed by SEM. The TiO₂-coated porous ceramics were examined as honeycomb photocatalytic microreactors. The photocatalytic activity was evaluated using the decomposition of methylene blue solution for radiation angles of 0° and 10° with respect to the pore axis. The highest photocatalytic activity was obtained for the porous ceramic having the pore diameter of 0.1 mm, coated with titanyl(IV)acetylacetonate and irradiated with a light angle of 0° with respect to the pore axis.     

Processing of Silicon Carbide-Mullite-Alumina Nanocomposites

Nanocomposite materials in the form of nanometer-sized second-phase particles dispersed in a ceramic matrix have been shown to display enhanced mechanical properties. In spite of this potential, processing methodologies to produce these nanocomposites are not well established. In this paper, we describe a new method for processing SiC-mullite-Al₂O₃ nanocomposites by the reaction sintering of green compacts prepared by colloidal consolidation of a mixture of SiC and Al₂O₃ powders. In this method, the surface of the SiC particles was first oxidized to produce silicon oxide and to reduce the core of the SiC particles to nanometer size. Next, the surface silicon oxide was reacted with alumina to produce mullite. This process results in particles with two kinds of morphologies: nanometer-sized SiC particles that are distributed in the mullite phase and mullite whiskers in the SiC phase. Both particle types are immersed in an Al₂O₃ matrix.     

Phase behavior of N‐isopropylacrylamide/acrylic acid copolymer hydrogels prepared with ultrasound

N‐Isopropylacrylamide/acrylic acid copolymer hydrogels were synthesized with ultrasound. The thermoresponsive phase behaviors of gels synthesized with ultrasound (US gels) were investigated and compared with those of gels synthesized in the absence of ultrasound (FR gels). The US gels showed thermoresponsive swelling behavior with a large hysteresis over a wide range of temperatures around its phase‐transition temperature. The hysteresis became larger with an increasing copolymerized acrylic acid content. The US gels were also characterized from the viewpoint of chemical, hydration, and macroscopic physical structures. Little difference was observed in the chemical and hydration structures of the FR gels and US gels. The macroscopic physical structure of the US gels was, however, distinct from that of the FR gels. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2449–2452, 2003