Structural Control of Rashba Spin–Orbit Coupling in In0.52Al0.48As/In0.53Ga0.47As/In0.52Al0.48As Quantum Wells

We investigated the correlation between the Rashba spin–orbit coefficient and potential shape of the quantum wells (QW), where values are experimentally deduced from the weak antilocalization analysis. We studied the gate I–V properties of the QW samples and have obtained results consistent with the potential shapes predicted for these QWs.     

Gas Effusion Spectra of Fullerenes

Gas effusion spectra of fullerenes are studied. Three peaks of toluene are found in gas effusion spectra dp/dT-T. Two peaks of oxygen are found in gas effusion spectra dN/dt-T of samples kept in the air after annealing to avoid the toluene. These phenomena confirmed to be reversible are discussed by treating fullerenes as intercalated materials.     

A reduction method of dynamic false contour utilizing the frame‐rate‐control method with suppression of the side effect on PDPs

Abstract— The plasma‐display panel (PDP) is a type of flat‐panel display that can display a high‐quality image. However, when moving images are displayed, annoying disturbances such as false contour noise occurs. This noise is called dynamic false contour (DFC). To achieve a higher‐quality image, DFC has to be reduced. Therefore, a new method to reduce DFC is proposed. To find a way to reduce DFC, a new evaluation value for it has been defined: the evaluation value of dynamic false contour (EVDFC). This value is defined on the basis of a person's subjective evaluation. By applying this value, the cause that generates DFC can be identified. On the basis of these studies, a new method for reducing DFC by applying frame‐rate control (FRC) with suppression of the side effect is proposed. This improved method can be used to provide high‐quality images.     

Differential Scanning Calorimetric Study of Solidification Behavior of Monoacylglycerols to Investigate the Cold-Flow Properties of Biodiesel

Monoacylglycerols (MAG) are impurities present in biodiesel as a result of incomplete reactions. MAG often solidify in biodiesel even at room temperature because of their high melting points. This worsens the cold-flow properties such as the cloud point and pour point. We hypothesized that several types of MAG solidify simultaneously; therefore, we performed differential scanning calorimetry of binary mixtures of MAG to elucidate their interactions during solidification. Three thermodynamic formulas were then applied to the experimental results: (1) non-solid-solution, (2) solid-solution, and (3) compound formation models. Binary mixtures of MAG showed complicated liquidus curves with multiple upward convex shapes, with which only the compound formation model fitted well. This model was applied to multicomponent mixtures that consisted of MAG and fatty acid methyl esters (FAME) as surrogate biodiesel fuels. We confirmed that the model still worked well. The results show that the compound formation model has good potential for predicting the cold-flow properties of biodiesel.     

Conductive and flexible multi-walled carbon nanotube/polydimethylsiloxane composites made with naphthalene/toluene mixture

Conventional conductive materials face challenges when utilizing them for flexible and wearable electronics and soft robotics. Carbon nanotube/polydimethylsiloxane (CNT/PDMS) composites are a promising alternative to the conventional hard conductors because they are light and can realize large deformation. To date, well dispersion of CNTs into PDMS to increase conductivity while maintaining flexibility remains challenging. We aimed at developing highly electrically conductive and flexible multi-walled carbon nanotube/PDMS (MWCNT/PDMS) composites. To this end, we proposed a method to enhance the dispersion of MWCNTs into PDMS using naphthalene and toluene. Our results showed that the addition of naphthalene and toluene into the composites improved dispersion of the MWCNTs and increased the direct current (DC) electrical conductivity. We also found that the morphology of primary aggregates of the MWCNTs influenced the DC electrical conductivity of the composites. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48167.     

Optical and acoustical investigation for plastic deformation of isotactic polypropylene/ethylene-1-hexene copolymer blends

The effects of morphology on mechanism of plastic deformation are investigated for binary blends of isotactic polypropylene and rubbery ethylene-1-hexene copolymers. In this work, plastic deformation developed during elongation is investigated by measuring light transmittance, electron microscopy, and ultrasonic propagation in the temperature region between 298 K and 353 K. It is found that the compatible blends hardly show stress-whitening at any temperature, whereas the incompatible blends show distinct stress-whitening below 333 K. Furthermore, microscopic defects such as microvoids and crystalline defects are found to be precursors for crazing which are origin of the stress-whitening.     

The effect of the addition of silica particles on linear spherulite growth rate of isotactic polypropylene and its explanation by lamellar cluster model

The effect of the addition of silica particles on spherulite growth rates of isotactic polypropylene has been investigated using an optical microscope. The spherulite growth rate remained constant with time and the growth rates decreased with increasing the silica content. The addition of silica particles generally causes a reduction of the average distance between adjacent silica particles and the linear growth rates become zero when the inter-particle distance reached to the end-to-end distance of the matrix chains. The reduction in the linear growth rate can be explained by assuming the lamellar clustering process that the precursor or solidified units with the single chain space, which spontaneously are built up from the melt, act as the crystallizing units and the diffusive mobility of the units was restricted by spatial confinement between adjacent silica particles.     

Multiwavelength all-optical TDM switching using a semiconductoroptical amplifier in a loop mirror

We report simultaneous all-optical switching of multiple wavelengths using an optical loop mirror with an asymmetrically placed semiconductor optical amplifier. Switching is shown for 14-wavelength channels (across 14-nm bandwidth) with switching contrast of 10-23 dB     

Improvement of anode oxidation reaction of a fuel cell using ammonium formate with Pt‐Ir catalysis

We have attempted to develop high‐performance and safe fuel cells by using ammonium formate as a solid (powder) fuel. This solid fuel has the potential of safer transportability than liquid fuels such as methanol from the viewpoint of toxicity and flammability. In order to make use of some of the advantages of ammonium formate, we investigated the oxidation characteristics of ammonium formate with respect to a Pt electrode. Cyclic voltammograms indicate that ammonium formate has high oxidation activity with respect to a Pt electrode. We have also found that the oxidation of ammonium formate can be improved by the addition of Ir to Pt catalysts. It is highly likely that ammonium formate will be useful as a solid (powder) fuel for polymer electrolyte membrane (PEM) fuel cells. This new fuel will promote the development of safe fuel cells for PEM. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 174(4): 45–50, 2011; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21043     

Growth and led evaluation ofN-type conductive lec gaas co-doped with in and si

Dislocation-free and low dislocation densityn-type conductive GaAs crystals, 50 mm in diameter, were grown by the In and Si co-doping LEC technique. Two-dimensional LED arrays were fabricated on substrates obtained from these crystals by the MOCVD technique and the influence of the In doping on the LED characteristics was examined. The light output power of LEDs fabricated on co-doped substrate with an In concentration of 1 ×10²⁰atoms/cm³ are low and are non-uniformly distributed, as compared with the boat-grown substrate, even though the co-doped substrate is dislocation-free. However, the LED properties of a substrate with an In concentration of 2 × 10¹⁸atoms/cm³ are the same as those of a boat-grown substrate. The light output power of the LEDs becomes higher as the In concentration in the substrate decreased.