Development of lateral displacement sensor for real‐time detection of structural damage

We have developed a novel sensor that enables us to measure the relative story displacement of a building structure in real time. This lateral displacement sensor (LDS) is composed of a light‐emitting diode (LED) array, which is fixed on the ceiling, and a position‐sensitive detector (PSD) unit, which is placed on the floor. We optimized the LDS to achieve high accuracy in lateral displacement measurement. The accuracy was evaluated to be 60 µm by conducting shaking table tests. Two LDSs were implemented in an actual building equipped with an active variable stiffness (AVS) system, and the building was vibrated with seismic waveforms by an exciter placed on the rooftop. The seismic displacement of the second floor relative to the first floor was measured using the LDS. Furthermore, the inclination angle of the second floor could be measured using the LDS during the seismic vibration. Using the AVS system, we realized the residual displacement of the second floor without inducing damage to the building, and succeeded in real‐time residual displacement measurement for the first time. These results indicate that the LDS is useful for the health diagnosis of a building structure. © 2011 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Improvement of anode oxidation reaction of a fuel cell using ammonium formate with Pt‐Ir catalysis

We have attempted to develop high‐performance and safe fuel cells by using ammonium formate as a solid (powder) fuel. This solid fuel has the potential of safer transportability than liquid fuels such as methanol from the viewpoint of toxicity and flammability. In order to make use of some of the advantages of ammonium formate, we investigated the oxidation characteristics of ammonium formate with respect to a Pt electrode. Cyclic voltammograms indicate that ammonium formate has high oxidation activity with respect to a Pt electrode. We have also found that the oxidation of ammonium formate can be improved by the addition of Ir to Pt catalysts. It is highly likely that ammonium formate will be useful as a solid (powder) fuel for polymer electrolyte membrane (PEM) fuel cells. This new fuel will promote the development of safe fuel cells for PEM. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 174(4): 45–50, 2011; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21043     

Multiwavelength all-optical TDM switching using a semiconductoroptical amplifier in a loop mirror

We report simultaneous all-optical switching of multiple wavelengths using an optical loop mirror with an asymmetrically placed semiconductor optical amplifier. Switching is shown for 14-wavelength channels (across 14-nm bandwidth) with switching contrast of 10-23 dB     

Growth and led evaluation ofN-type conductive lec gaas co-doped with in and si

Dislocation-free and low dislocation densityn-type conductive GaAs crystals, 50 mm in diameter, were grown by the In and Si co-doping LEC technique. Two-dimensional LED arrays were fabricated on substrates obtained from these crystals by the MOCVD technique and the influence of the In doping on the LED characteristics was examined. The light output power of LEDs fabricated on co-doped substrate with an In concentration of 1 ×10²⁰atoms/cm³ are low and are non-uniformly distributed, as compared with the boat-grown substrate, even though the co-doped substrate is dislocation-free. However, the LED properties of a substrate with an In concentration of 2 × 10¹⁸atoms/cm³ are the same as those of a boat-grown substrate. The light output power of the LEDs becomes higher as the In concentration in the substrate decreased.     

Optical Energy Gap and Below Gap Optical Absorption of Fullerene Films Measured by the Constant Photocurrent Method and Photothermal Deflection Spectroscopy

The CPM spectra of fullerene films was measured to obtain the below gap absorption. The optical energy gap E_o was obtained by using the Tauc's plots. E_o did not change greatly with intercalated impurities. The absorption due to intercalated impurities was found below 1.6eV.     

Electric dichroism studies of the bonding of Co(III) chelate with synthetic polyelectrolytes

The interactions of bis-2-(2-pyridylazo)-1-naphthol Co(III), [Co(III) (αPAN)₂⁺], with five kinds of synthetic polyelectrolytes have been studied by spectrophotometric and transient electric dichroism measurements. The polyelectrolytes were: poly(styrene sulphonic acid) (PSS); poly(acrylic acid) (PAA); poly(l-glutamic acid) (PLG); $\text{poly}\text{(N}{}^{\mathrm{<mtext>e</mtext>}}\text{,N}{}^{\mathrm{<mtext>e</mtext>}}\text{-}\text{dicarboxylmethyl-}\text{l}\text{-lysine}$ (PDCML); and poly(l-lysine) (PLL). The equilibrium constant of the reaction:

with P = polyelectrolyte residue was determined spectrophotometrically: K₁ is > 10⁷ M^?1 (PSS); (1.4 ± 0.2) × 10⁴ M^?1 (PAA); (4.0 ± 0.4) × 10³ M^?1 (PLG); (1.4 ± 0.2) × 10⁶ M^?1 (PDCML); and < 10² M^?1 (PLL) at pH 6–8. From transient electric dichroism, the angle (ψ) between the αPAN plane and the polymer axis was determined to be 65° (PSS); 52° (PAA); 55° (PLG); and 52° (PDCML). The large K₁ and ψ values for PSS are ascribed to the hydrophobic interaction between the aromatic αPAN ring and the styrene sulphonate residues of PSS. Using stopped-flow electric dichroism measurements, rapid transfer of a bound Co(III) chelate from the PDCML to PSS chains was shown to occur.     

Pulmonary arterial impedance analysis by the use of the oscillated assist flow

Pulmonary arterial impedance is an important and interesting characteristic that can be used to evaluate the physiological properties of the pulmonary vessel. However, power spectrum analysis of the pulmonary artery pressure and flow pattern have suggested that peak power in the relatively high frequency range (> 10 Hz) is significantly low; thus, we cannot analyze the vessel properties in the high frequency range. In this study, we used the newly developed vibrating flow pump (VFP), which can generate oscillated blood flow with a relatively high frequency (10-50 Hz) for right heart bypass, to evaluate the pulmonary arterial impedance pattern in the high frequency range. Acute animal experiments of the right heart bypass from the right atrium to the pulmonary artery using 6 healthy adult goats were performed. The flow pattern and pressure of the pulmonary artery, electrocardiograms (ECGs), and arterial and right atrial pressures were continuously monitored during the experiments. Spectral analysis of the hemodynamic parameters using the fast Fourier transform (FFT) method was performed to evaluate the spectral properties. The coherence function, transfer function, and phase patterns were calculated to analyze the impedance pattern in the relatively high frequency area. Previously, various investigators had tried to analyze the impedance patterns of the pulmonary artery; however, they could not analyze the impedance patterns over 10 Hz because the spectral patterns of the pulmonary flow do not have high power at high frequencies. These physiological analyses may be useful in designing the optimal pulmonary circulation.     

Probabilistic fault grading based on activation checking and observability analysis

A simplified probabilistic fault grading method is described. The concept of propagation probability is introduced in place of the sensitization probability of STAFAN, and the empirical parameters of STAFAN are eliminated. The division of input vectors into subsets is monitored by the activation or toggle rate. The accuracy of the method is examined for fault coverage estimation and for predicting the undetected faults.     

A case of plasma component exchange using membrane plasma separator EVACURE™

Purpose:  Performed free coagulant hemodialysis to patients having hemorrhage with the hope to avoid aggravation of bleeding caused by anticoagulant agent from dialysis. Method:  Examined 19 cases of patients with bleeding tendency, whether it is possible to perform free coagulant hemodialysis by using PAES membrane, EVAL membrane, PS membrane, Cellulose triacetate membrane and Vitamin‐E modified‐dialysis membrane. Result:  With PAES membrane, the result showed a non‐ blockade rate of 91% after four hours and 100% after two hours. Therefore, blockade was prevented with a fairly high rate. In cases of blockade, most of them were possibly avoidable with a little contrivance as the reason were lack of establish blood flow rate, faulty position of a needle, etc. Conclusions:  By using PAES membrane, it was possible to perform free coagulant hemodialysis. In order to completely have no blockade of blood lines in the future, we must strive further on.     

Heterogeneous Multi-Core Architecture That Enables 54x AAC-LC Stereo Encoding

This paper describes a heterogeneous multi-core processor (HMCP) architecture that integrates general-purpose processors (CPUs) and accelerators (ACCs) to achieve exceptional performance as well as low-power consumption for the SoCs of embedded systems. The memory architectures of CPUs and ACCs were unified to improve programming and compiling efficiency. Advanced audio codec-low complexity (AAC-LC) stereo audio encoding was parallelized on a heterogeneous multi-core having homogeneous processor cores and dynamically reconfigurable processor (DRP) ACC cores in a preliminary evaluation of the HMCP architecture. The performance evaluation revealed that 54times AAC encoding was achieved on the chip with two CPUs at 600 MHz and two DRPs at 300 MHz, which achieved encoding of an entire CD within 1- 2 min.