Two types of a passive safety containment for a near future BWR with active and passive safety systems

The paper presents two types of a passive safety containment for a near future BWR. They are named Mark S and Mark X containment. One of their common merits is very low peak pressure at severe accidents without venting the containment atmosphere to the environment. The PCV pressure can be moderated within the design pressure. Another merit is the capability to submerge the PCV and the RPV above the core level. The third merit is robustness against external events such as a large commercial airplane crash. Both the containments have a passive cooling core catcher that has radial cooling channels. The Mark S containment is made of reinforced concrete and applicable to a large power BWR up to 1830 MWe. The Mark X containment has the steel secondary containment and can be cooled by natural circulation of outside air. It can accommodate a medium power BWR up to 1380 MWe. In both cases the plants have active and passive safety systems constituting in-depth hybrid safety (IDHS). The IDHS provides not only hardware diversity between active and passive safety systems but also more importantly diversity of the ultimate heat sinks between the atmosphere and the sea water. Although the plant concept discussed in the paper uses well-established technology, plant performance including economy is innovatively and evolutionally improved. Nothing is new in the hardware but everything is new in the performance.     

Imaging dynamics of charge-auto-organisation in glass capillaries

Multiply charged ion beam transmission through insulating capillaries is today a very active field of research. Thanks to the work of several groups during the last five years, several features of this unexpected process have been evidenced. The open challenge is to understand and control the self-organized charging-up of the capillary walls, which leads finally to the ion transmission. Up to now, the specific charge distribution on the inner surface, as well as the dynamics of the build-up, are still to be understood. While capillaries usually studied are microscopic pore networks etched in different materials, our concern is in macroscopic single capillaries made of glass. With a length of several centimeters and a diameter of a few micrometers at the exit, these capillaries have nevertheless the same aspect ratio as the etched pores (length/diameter ≈ 100). One of the leading goals of this research on single capillaries is to produce multi-charged ion beams with diameters smaller than a micrometer (nano-beams). These glass capillaries offer the opportunity to be used as an ion funnel due to their amazing properties of guiding and focusing highly charged ion beams without altering neither their initial charge state nor the beam emittance (<10⁻³ π mm mrad). However, the understanding of the underlying process is not complete and relies on models assuming charge patches distributed along the capillary and which still need to be tested. We present the first observation imaging the dynamics of the charging-up process in single glass capillaries. During the build-up of the self-organized charge deposition on the capillary walls, the 230 keV Xe²³⁺ transmitted beam is deflected back and forth several times as the outgoing current increases. This is in agreement with the picture of charge patches created sequentially along the capillary and thus deflecting the beam until a stationary state is reached.     

Flame-spread probability and local interactive effects in randomly arranged fuel-droplet arrays in microgravity

We investigated the flame-spread characteristics of randomly arranged fuel-droplet arrays in microgravity. Flame-spread probability was calculated based on a percolation model with the flame-spread-limit distance of evenly-spaced n-decane droplet arrays in microgravity. Flame-spread probability depends on the occupation fraction of droplets in a lattice and rapidly increases with the occupation fraction. The local flame-spread-limit distance of unevenly-spaced n-decane droplet arrays was experimentally investigated in microgravity. The droplets were arranged in a straight line at uneven intervals. The local flame-spread-limit distance of the unevenly-spaced droplet arrays depended on the droplet arrangement and increased from the flame-spread-limit distance of the evenly-spaced droplet arrays due to interactive effects. The flame-spread probability considering the increase in local flame-spread-limit distance is larger than that without it.     

Denatured-jacalin derivatives with selective recognition for O-linked glycosides (ST,T, Tn,and STn Type) on IgA1 hinge region

Immunoglobulin A1 (IgA1) concentration in the plasma of patients with IgA nephropathy (IgAN) as the cause of renal failure is higher than that in the plasma of normal controls. IgA1 with abnormal sugars is considered to deposit in the glomerular mesangium, aggravating nephritis in IgAN. Jacalin is a lectin that recognizes sugars on IgA1. However, its selective-recognition for normal-type (ST type, NeuAc-α(2,3)-Gal-β(1,3)-GalNAc) and abnormal-type (T type, Gal-β(1,3)-GalNAc; Tn type, GalNAc; STn type, NeuAc-α(2,6)-GalNAc) sugars α-O-linked to serine/threonine in IgA1 is weak. Therefore, jacalin cannot be used for recognizing specific sugar types on IgA1. We attempted to develop a new recognition method for specific sugar types on IgA1 by utilizing the multirecognition capability of jacalin. Its binding abilities were regulated by heat denaturation with suitable template sugar (galactose or N-acetylgalactosamine). Further, we successfully prepared denatured-jacalin derivatives, which recognized ST-/T-type sugars on IgA1, by sugar-immobilized affinity chromatography. Enzyme-linked immunosorbent assay of denatured-jacalin derivatives, showed the ratios of abnormal sugars on IgA1 in the plasma of IgAN patients and normal controls to be approximately 60% and 20%, respectively. The results proved that profiling of sugar types in IgAN can successfully be performed by solely using jacalin derivatives.     

Effect of mixing ratio on bactericidal action of MgO–CaO powders

MgO–CaO powders were prepared with different molar ratios (MgO/CaO) at 1400 °C for 2 h in air. By using the powder samples obtained, the change in bactericidal effect as a function of MgO–CaO composition was studied by colony count method. From the XRD measurements, it was found that CaO solid solution was formed by the replacement of Mg²⁺ ion with larger Ca²⁺ ion. However, no formation of MgO solid solution was observed. The average particle size and the specific surface area of the samples used in this study were about 0.2 m and 10.5m²g^–1, respectively. The pH values of physiological saline containing powder samples increased with the increase of CaO content, and the value reached 12.1 in sample with the molar ratio (MgO/CaO) of 0.25. From the results of bactericidal tests for Staphylococcus aureus, it was found that the bactericidal effect increased with the increase of CaO content in the samples.     

Novel circular-beam equalizing techniques that use graded-index fiber optics for a high-power laser diode

We demonstrate a novel method of equalizing a laser diode (LD) beam into a circular beam. This method uses the twist effect of graded index (GI) fiber optics. An asymmetric LD beam with beam qualities of M2 = 500 in the slow axis and M2 = 4 in the fast axis is converted successfully into a symmetric circular beam with a beam quality of M2 = 175. The circular-output beam with 92% coupling efficiency from the fiber input to the fiber output is obtained with a 5-m-long GI1200 (1200 means a core diameter of 1200 microm) fiber for a 2-W LD array. We extend the experiments to a higher-power source with higher asymmetric beam qualities of M2 = 3000 and M2 = 4. By slightly bending the GI10000 (10000 means a core diameter of 10,000 microm) fiber, we have succeeded in generating a symmetric beam with a improved beam quality of M2 = 2000. The average beam quality is preserved when the asymmetric ratio is not high, and the beam quality degradation ratio is investigated up to asymmetric ratios of 750.     

A New CMC-AA Resin/Inorganic-gel Super Absorbent Material

A super absorbent material was prepared with the super absorbent resin （ SAR ） and inorganic gel. The SAR of the carboxymethyl cellulose grafting acrylic acid （ CMC-AA ） was copolymer synthesized using the method of inverse-phase suspension polymerization. The influences of the monomer concentration, neutralization degree, the initiator, dispersion agent, cross-linking agent, reaction and drying temperature on the grafting copolymer properties were examined. Meanwhlie, its properties was investigated and the model for absorption mechanism of this absorbent composite was proposed.     

Multiple fuzzy state-value functions for human evaluation through interactive trajectory planning of a partner robot

The purpose of this study is to develop partner robots that can obtain and accumulate human-friendly behaviors. To achieve this purpose, the entire architecture of the robot is designed, based on a concept of structured learning which emphasizes the importance of interactive learning of several modules through interaction with its environment. This paper deals with a trajectory planning method for generating hand-to-hand behaviors of a partner robot by using multiple fuzzy state-value functions, a self-organizing map, and an interactive genetic algorithm. A trajectory for the behavior is generated by an interactive genetic algorithm using human evaluation. In order to reduce human load, human evaluation is estimated by using the fuzzy state-value function. Furthermore, to cope with various situations, a self-organizing map is used for clustering a given task dependent on a human hand position. And then, a fuzzy state-value function is assigned to each output unit of the self-organizing map. The robot can easily obtain and accumulate human-friendly trajectories using a fuzzy state-value function and a knowledge database corresponding to the unit selected in the self-organizing map. Finally, multiple fuzzy state-value functions can estimate a human evaluation model for the hand-to-hand behaviors. Several experimental results show the effectiveness of the proposed method.     

Spatial indexing of high-dimensional data based on relative approximation

We propose a novel index structure, the A-tree (approximation tree), for similarity searches in high-dimensional data. The basic idea of the A-tree is the introduction of virtual bounding rectangles (VBRs) which contain and approximate MBRs or data objects. VBRs can be represented quite compactly and thus affect the tree configuration both quantitatively and qualitatively. First, since tree nodes can contain a large number of VBR entries, fanout becomes large, which increases search speed. More importantly, we have a free hand in arranging MBRs and VBRs in the tree nodes. Each A-tree node contains an MBR and its children VBRs. Therefore, by fetching an A-tree node, we can obtain information on the exact position of a parent MBR and the approximate position of its children. We have performed experiments using both synthetic and real data sets. For the real data sets, the A-tree outperforms the SR-tree and the VA-file in all dimensionalities up to 64 dimensions, which is the highest dimension in our experiments. Additionally, we propose a cost model for the A-tree. We verify the validity of the cost model for synthetic and real data sets. Edited by T. Sellis. Received: December 8, 2000 / Accepted: March 20, 2002 Published online: September 25, 2002