Superhydrophobic/superhydrophilic micropatterning on a carbon nanotube film using a laser plasma-type hyperthermal atom beam facility

Superhydrophobic/superhydrophilic micropatterning on a carbon nanotube (CNT) film has been achieved using a laser plasma-type hyperthermal atom beam facility, which produces a small amount of damage and generates a highly anisotropic beam. Fluorination and oxidation on CNT films by exposure to fluorine-atom and oxygen-atom beams caused superhydrophobic and superhydrophilic surfaces, respectively, while maintaining the as-grown fibrous forms of the CNT films. Micropatterned oxidation on CNT films without using photoresists created superhydrophilic microdots and microchannels.     

Development of rapid hygrothermal pasteurization using saturated water vapor

We developed a novel rapid hygrothermal pasteurization (RHP) method using saturated water vapor with a dew point of 100 °C. In the present study, the effects of RHP on microbiological quality and quality attributes such as color changes, firmness and ascorbic acid content on many fresh-cut fruits and vegetables (cabbage, cucumber, carrot, cherry tomato, bell pepper, strawberry, pineapple and melon) were investigated. The RHP was performed within a second by free-falling samples through a cylindrical processing chamber filled with steam. The RHP resulted in a 0.7–2.0 log order reduction in the numbers of naturally inoculated mesophilic bacteria. Furthermore, the RHP induced no significant changes in color and firmness of samples, except on the leafy vegetable, cabbage. Ascorbic acid was also retained approximately 80% and above. These results indicate that the RHP is a clean and effective method for decontaminating mesophilic bacteria on fresh fruits and vegetables with minimal changes in quality.Industrial relevanceIn fresh-cut industry, an effective and risk-free decontamination technology is required for use in place of a conventional method, washing by chlorine that can produce carcinogenic chlorinated by-products. In this study, the rapid hygrothermal pasteurization (RHP) method using saturated water vapor was invented and their ability for applying minimal processing was evaluated. The results showed that RHP, without using chemicals, can reduce microorganism load and preserve quality attributes in many kinds of fresh-cut fruits and vegetables. Therefore, RHP could be used as a novel method, which can be generally applicable to fresh-cut fruits and vegetables in the food industry.     

Model analysis on dispersion characteristics of fine particles in Newtonian molten polymer

In this paper, a model estimating the time-dependent distribution of cluster size consisting of fine particles in Newtonian molten polymer was proposed. The present model for agglomerative suspension was developed based on Usui’s thixotropy model, derived by taking the balance between shear breakup, shear coagulation and Brownian coagulation processes. The analysis was applied to the experimental results for silica/(ethylene methyl-meta acrylate copolymer) suspensions. The time variations of cluster size distributions, of viscosities and of the mean numbers of particles in a cluster were calculated and the results were compared with experimental results for the cases of shear rates from 0.2 to 10 s^?1 when the solid volume fraction was set at 0.15. From the results, it was found that the present model can estimated the steady state values of the slurry viscosity and the mean particle numbers in a cluster as well as Usui’s original model. However, the model could not sufficiently express the time variation of rheological characteristics due to the over-estimation of the contribution of shear rate when the cluster size is small.     

Lipid components,fatty acid distributions of triacylglycerols and phospholipids in rice brans

Endogenous tocochromanols in extracted lipids from rice brans of the five cultivars were determined by high-performance liquid chromatography, and were investigated in relation to the fatty acid (FA) distribution of triacylglycerols (TAG) and phospholipids (PL). The dominant tocols were α-tocopherol and γ-tocotrienol, followed by α-tocotrienol and with much smaller amounts of γ-tocopherol and δ-tocotrienol. The lipids of these rice brans comprised mainly TAG (80.6–86.0 wt.%), free FA (4.2–9.0 wt.%), and phospholipids (5.5–6.7 wt.%), whilst other components were also detected in minor proportions (0.2–2.1 wt.%). The PL components included phosphatidyl choline (31.8–46.8 wt.%), phosphatidyl ethanolamine (25.0–38.9 wt.%) and phosphatidyl inositol (20.2–23.2 wt.%). Comparison of these different cultivars showed, with a few exceptions, no significant differences (P > 0.05) in FA distribution. FA distribution of TAG among the five cultivars was evident in the rice brans: unsaturated FA were predominantly concentrated at the sn-2 position and saturated FA primarily occupying the sn-1 or sn-3 position. These results suggest that the tocopherol content, lipid component, and FA distribution in rice brans are not dependent on the cultivation areas during the growing season.     

Antifungal activity of the fermentation product of herbs by lactic acid bacteria against tinea

The fermentation product of herbs by lactic acid bacteria (FHL), in which Enterococcus faecalis TH10 predominated, was assayed for antifungal activity against tinea. The antifungal activity of FHL was as high as that of a synthetic fungicide. Autoclaving FHL did not reduce its antifungal activity, whereas neutralizing it did. The results suggested that nonproteinaceous compounds or organic acids in FHL could inhibit the growth of the dermatophyte tinea under low-pH conditions, and that malonic acid and acetic acid could have especially high antifungal activity against tinea.     

Flexible microelectronics: New application for thin‐film transistors in fingerprint sensors

Abstract— Thin‐film transistors (TFTs) are field‐effect transistors that can be used to create large‐scale‐integrated (LSI) circuits. The combination of high‐performance TFTs and transfer technology of the TFTs has the potential to foster the rise of a new flexible microelectronics industry. This paper discusses the current status of flexible microelectronics, using a TFT fingerprint sensor (FPS) as an example. Technology used in active‐matrix displays can easily be applied to the TFT FPS. TFT technology should not be confined to the display industry; its use should be expanded into the semiconductor industry. With the result presented in this paper, we declare a new era of flexible microelectronics open.     

Behavior of Buried Flexible Pipe under High Fills and Design Implications

The existing design guidelines for buried flexible pipes are limited to depth up to 10?m. The increasing use of difficult terrains for infrastructure, landfills, and residential and industrial developments has prompted installation of drainage pipelines under 20–30?m high fills. This paper presents the behavior of an instrumented flexible pipe buried under a 47.1?m deep fill. For filling above 20?m, the measured vertical stress above the pipe exhibited a concave distribution, corresponding to 90 and 110% of the average vertical pressure at the center and edges of the pipe, respectively. The measured results suggest that a triangular lateral pressure distribution can lead to overly conservative and uneconomical results for high fills while Spangler’s analysis is unconservative. Based on the measured results, a revised vertical and lateral earth pressure diagram was proposed for the design of flexible pipe under high fills >20?m. This paper proposes closed-form analyses for estimating the moments and displacements of the pipe subjected to high fill earth pressures. These closed-form solutions agree well with the measured pipe displacements and strains.     

Cloud Detection Over Sea Surface by use of Autocorrelation Functions of Upwelling Infrared Spectra in the 800-900-cm(-1) Window Region

A new algorithm for cloud detection over sea surface has been developed that makes use of autocorrelation and cross correlation between a real spectrum and either a synthetic or a laboratory spectrum. The scheme is intended for high-spectral-resolution satelliteborne infrared sensors that will measure the Earth's entire emission spectrum rather than the upwelling radiance in a few channels. A new index is defined with which one can determine quantitatively the degree of homogeneity of two spectra in the 800-900-cm(-1) (11.11-12.5 mum) window region. The index makes use of only the observed spectrum along with a reference synthetic spectrum and, therefore, may form the basis for an operational stand-alone cloud-detection algorithm for next-generation high-spectral-resolution infrared sensors. Application both to synthetic spectra obtained in simulation and to sea-surface real spectra recorded through the interferometric monitor for greenhouse gases is considered.     

Development and evaluation of the interferometric monitor for greenhouse gases: a high-throughput fourier-transform infrared radiometer for nadir earth observation

The interferometric monitor for greenhouse gases (IMG) was the precursor of the high-resolution Fourier-transform infrared radiometer (FTIR) onboard a satellite for observation of the Earth. The IMG endured the stress of a rocket launch, demonstrating that the high-resolution, high-throughput spectrometer is indeed feasible for use onboard a satellite. The IMG adopted a newly developed lubricant-free magnetic suspension mechanism and a dynamic alignment system for the moving mirror with a maximum traveling distance of 10 cm. We present the instrumentation of the IMG, characteristics of the movable mirror drive system, and the evaluation results of sensor specifications during space operation.