Development of an alpha/beta/gamma detector for radiation monitoring

For radiation monitoring at the site of nuclear power plant accidents such as Fukushima Daiichi, radiation detectors not only for gamma photons but also for alpha and beta particles are needed because some nuclear fission products emit beta particles and gamma photons and some nuclear fuels contain plutonium that emits alpha particles. We developed a radiation detector that can simultaneously monitor alpha and beta particles and gamma photons for radiation monitoring. The detector consists of three-layered scintillators optically coupled to each other and coupled to a photomultiplier tube. The first layer, which is made of a thin plastic scintillator (decay time: 2.4 ns), detects alpha particles. The second layer, which is made of a thin Gd(2)SiO(5) (GSO) scintillator with 1.5 mol.% Ce (decay time: 35 ns), detects beta particles. The third layer made of a thin GSO scintillator with 0.4 mol.% Ce (decay time: 70 ns) detects gamma photons. By using pulse shape discrimination, the count rates of these layers can be separated. With individual irradiation of alpha and beta particles and gamma photons, the count rate of the first layer represented the alpha particles, the second layer represented the beta particles, and the third layer represented the gamma photons. Even with simultaneous irradiation of the alpha and beta particles and the gamma photons, these three types of radiation can be individually monitored using correction for the gamma detection efficiency of the second and third layers. Our developed alpha, beta, and gamma detector is simple and will be useful for radiation monitoring, especially at nuclear power plant accident sites or other applications where the simultaneous measurements of alpha and beta particles and gamma photons are required.     

Measurement of IGSCC depth by SAFT-UT

In order to examine the ability of SAFT-UT of measuring the IGSCC depth, two preparatory experiments on artificial defects and one on a real IGSCC were performed.In the first, the capabilities of SAFT-UT of determining crack depth were assessed for an artificial defect in a carbon steel. It was found that crack depth could be measured by obtaining the crack tip images.In the second, influences of large grain size were investigated by testing a slot made by EDM in the weld heat affected zone of austenitic stainless steel piping. It was found that a narrow beam spread probe, i.e., a large F number probe, was better for measurement of crack depth in an austenitic stainless steel.Finally, a real IGSCC was tested as introduced in two different test blocks. The positions of tip and the opening of the IGSCC deduced by SAFT-UT were in a fairly good agreement with those revealed afterwards.     

Fe-Ni-Si基奥氏体时效合金的马氏体相变和形状记忆效应

It is well known that the morphologies of the α martensite formed from the γ phase in ferrous alloys are classified into five types of lath, butterfly, (225)A type plate,lenticular and thin-plate. Among those α martensites, onlythe thinplate martensite, which is characterized by containing a high density of transformation twins, has a potential of exhibiting a perfect shape memory (SM) effect.Recently the present authors found in Fe-Ni-Si alloys that the thin-plate martensite is formed by the introduction of fine and coherent γ-(Ni,Fe)3Si particles with a L12 ordered structure in the austenite matrix due to ausaging. In the present study, the SM properties of the ausaged Fe-Ni-Si alloys with the thin-plate martensite are investigated by a conventional bending-test. The effects of the addition of Co to the Fe-Ni-Si alloys on the martensitic transformation and the SM properties are also investigated. It is shown that while the ausaged Fe-Ni-Si ternary alloys exhibit an imperfect SM effect due to reverse transformation from stress-induced thin-plate martensite to austenite, the SM properties are improved by the addition of Co. An almost perfect SM effect is confirmed in the Fe-Ni-Si-Co alloys by heating to 1 100 ℃ after deformation at -196 ℃.     

Low temperature synthesis of silver-palladium alloy powders internal electrodes for multilayer ceramic devices

Physical and electrical properties of three types of Ag-Pd pastes, which consist of different metal fine powders, i.e., a coprecipitated powder, an agglomerated alloy powder made by heat treatment and a pulverized alloy powder produced by improved pulverization method, have been studied. The paste prepared from pulverized alloy powder showed a higher film packing density (6.3 g/cm³) than those made of the other powders. The film consisting of pulverized alloy powder showed a lower expansion at around 500 °C, a lower shrinkage from 700 °C to 1100 °C and a lower electric resistivity. The results indicated that the paste which consists of an pulverized Ag-Pd alloy powder was superior in performance to the other two pastes for an internal electrode material of multilayer ceramic device.     

Effect of mean stress on fatigue properties of 1800 MPa-class spring steels

Fatigue tests were conducted for 1800 MPa-class spring steels at various stress ratios. For comparison, similar fatigue tests were conducted for conventional steels whose tensile strength was lower than 1200 MPa. The spring steels exhibited fish-eye fractures, and the origins of these fractures were oxide, TiN and the matrix itself. In contrast, the conventional steels never exhibited fish-eye fractures. The fatigue strength of these steels decreased monotonously as the stress ratio increased, when the fatigue strength was evaluated in terms of stress amplitude. However, the fatigue strength degradation was less than that expected from a modified-Goodman line, and the best fit line was obtained by connecting the fatigue limit at zero mean stress to true fracture strength instead of tensile strength. This research also reviewed application of a power low to the stress ratio effect evaluation. In these results, the difference between the spring and conventional steels was negligible.     

Multi-objective genetic algorithm for solving N-version program design problem

N-version programming (NVP) is a programming approach for constructing fault tolerant software systems. Generally, an optimization model utilized in NVP selects the optimal set of versions for each module to maximize the system reliability and to constrain the total cost to remain within a given budget. In such a model, while the number of versions included in the obtained solution is generally reduced, the budget restriction may be so rigid that it may fail to find the optimal solution. In order to ameliorate this problem, this paper proposes a novel bi-objective optimization model that maximizes the system reliability and minimizes the system total cost for designing N-version software systems. When solving multi-objective optimization problem, it is crucial to find Pareto solutions. It is, however, not easy to obtain them. In this paper, we propose a novel bi-objective optimization model that obtains many Pareto solutions efficiently.We formulate the optimal design problem of NVP as a bi-objective 0–1 nonlinear integer programming problem. In order to overcome this problem, we propose a Multi-objective genetic algorithm (MOGA), which is a powerful, though time-consuming, method to solve multi-objective optimization problems. When implementing genetic algorithm (GA), the use of an appropriate genetic representation scheme is one of the most important issues to obtain good performance. We employ random-key representation in our MOGA to find many Pareto solutions spaced as evenly as possible along the Pareto frontier. To pursue improve further performance, we introduce elitism, the Pareto-insertion and the Pareto-deletion operations based on distance between Pareto solutions in the selection process.The proposed MOGA obtains many Pareto solutions along the Pareto frontier evenly. The user of the MOGA can select the best compromise solution among the candidates by controlling the balance between the system reliability and the total cost.     

Second harmonic generation of pseudo mode-locked multi ten milliwatt picosecond Ti:sapphire laser

We report the single-pass second harmonic generation (SHG) of the picosecond Ti:sapphire laser with a periodically poled lithium niobate (PPLN) waveguide. We demonstrate a conversion efficiency of 37% for the 9-mW fundamental input power at 820 nm. This laser source can provide three types of pulsed modes such as picosecond, nanosecond, and contiuous wave, by adjusting the power of the pumping source. We compare the conversion efficiency in each mode, and clearly show that SHG efficiency depends on the pulsewidth, that is, the peak power of the laser source. As the temperature of the PPLN rises, the fundamental wavelength for phase-matching becomes longer. We indicate that the rate is about 0.06 nm/K.     

Asymptotic properties on codeword lengths of an optimal FV code for general sources

This correspondence is concerned with asymptotic properties on the codeword length of a fixed-to-variable length code (FV code) for a general source {X/sup n/}/sub n=1//sup /spl infin// with a finite or countably infinite alphabet. Suppose that for each n /spl ges/ 1 X/sup n/ is encoded to a binary codeword /spl phi//sub n/(X/sup n/) of length l(/spl phi//sub n/(X/sup n/)). Letting /spl epsiv//sub n/ denote the decoding error probability, we consider the following two criteria on FV codes: i) /spl epsiv//sub n/ = 0 for all n /spl ges/ 1 and ii) lim sup/sub n/spl rarr//spl infin///spl epsiv//sub n/ /spl les/ /spl epsiv/ for an arbitrarily given /spl epsiv/ /spl isin/ [0,1). Under criterion i), we show that, if X/sup n/ is encoded by an arbitrary prefix-free FV code asymptotically achieving the entropy, 1/nl(/spl phi//sub n/(X/sup n/)) - 1/nlog/sub 2/ 1/PX/sup n/(X/sup n/) /spl rarr/ 0 in probability as n /spl rarr/ /spl infin/ under a certain condition, where P/sub X//sup n/ denotes the probability distribution of X/sup n/. Under criterion ii), we first determine the minimum rate achieved by FV codes. Next, we show that 1/nl(/spl phi//sub n/(X/sup n/)) of an arbitrary FV code achieving the minimum rate in a certain sense has a property similar to the lossless case.     

H optimal approximation for causal spline interpolation

In this paper, we give a causal solution to the problem of spline interpolation using H^∞ optimal approximation. Generally speaking, spline interpolation requires filtering the whole sampled data, the past and the future, to reconstruct the inter-sample values. This leads to non-causality of the filter, and this becomes a critical issue for real-time applications.Our objective here is to derive a causal system which approximates spline interpolation by H^∞ optimization for the filter. The advantage of H^∞ optimization is that it can address uncertainty in the input signals to be interpolated in design, and hence the optimized system has robustness property against signal uncertainty.We give a closed-form solution to the H^∞ optimization in the case of the cubic splines. For higher-order splines, the optimal filter can be effectively solved by a numerical computation. We also show that the optimal FIR (finite impulse response) filter can be designed by an LMI (linear matrix inequality), which can also be effectively solved numerically. A design example is presented to illustrate the result.     

Direct modulation of InGaAsP/InP double heterostructure lasers

Direct modulation of an InGaAsP/InP double heterostructure laser was investigated experimentally. Sinusoidal modulation up to 2.5 GHz was achieved with almost constant modulation efficiency. Pulse responses showed that the damped relaxation oscillation in light output was well suppressed.