Polarisation characteristics of fused-fibre coupler as quarter-wave device in 1.55?m-wavelength region

Polarisation characteristics of the fused-taper-twisted single-mode-fibre coupler as a quarter-wave device are reported for the first time. In the case that circular polarisation is launched into the input port of the fused-fibre coupler, linear polarisation was observed at two output ports of the coupler, and an extinction ratio of about 30dB was obtained.     

Field test results of multi-channel digital tv transmission at 15 and 30 Mb/s through an intelsat satellite using a PSK/FDMA system

This paper describes field test results of multi-channel digital TV transmission using a PSK/FDMA system and the related subjective test results of received TV pictures. The picture quality of the multi-channel 15 or 30 Mb/s transmission for both NTSC and PAL systems through the INTELSAT POR satellite are subjectively evaluated for various bit-error rates. In addition, subjective evaluations were made at various values of earth-station e.i.r.p. to compare the picture quality of digital transmissions with that of current half-transponder FM transmission.     

Fracture behavior of a corroded structural component under bending load

In order to clarify the significance of corrosion damage for risk assessment, bend tests were carried out on a roughened corroded annular plate prepared from an oil storage tank. It was found that a marked decrease of load carrying capacity occurred in the high deflection region depending upon the degree of corrosion damage. The reason for extensive loss of load carrying capacity was successfully explained from successive observation of crack growth behavior on the corroded surface of the annular plate. Photographic evidence showed that multiple cracks, initiated around individual pits, grew rapidly not only by crack growth, but also by coalescence with other neighboring cracks under the influence of plastic constraint derived from the welded joint. The linking up of multiple cracks leading to a catastrophic failure was considered to be a characteristic event of the roughened corroded component, and was expected to occur depending upon the degree of corrosion damage under a complex stress state.     

Effect of Temperature Change on Interfacial Behavior of an Acoustically Levitated Droplet

Under the microgravity environment, new and high quality materials with a homogeneous crystal structure are expected to be manufactured by undercooling solidification, since the material manufacturing under the microgravity environment is more static than that under the normal gravity. However, the temperature change on the interface of the material in space can affect on the material processing. The purpose of the present study is to investigate effect of the temperature change of interface on the large levitated droplet interface. A water droplet levitated by the acoustic standing wave is heated by YAG laser. In order to heat the water droplet by the laser heating, rhodamine 6G is solved in it to achieve high absorbance of the laser. The droplet diameter is from 4 to 5.5 mm. The deformation of the droplet interface is observed by high speed video camera. The temperature of droplet is measured by the radiation thermometer. It is noticed that the larger droplet under the higher sound pressure tends to oscillate remarkably by the laser heating.     

Evaluation of three-dimensional effects in short deep beams using a rigid-body-spring-model

Three-dimensional (3-D) effects in short deep beams without stirrups that failed in shear were investigated experimentally and analytically. Two deep beams with a shear span to depth ratio (a/d) of 0.5 and with different beam widths were tested. The effect of beam width on load-carrying capacity, failure mode, crack pattern and 3-D behavior was investigated, and shape effect due to beam width was clarified. In addition, the beams were analyzed by the 3-D rigid-body-spring model (RBSM). RBSM is a discrete form of modeling that presents realistic behavior from cracking to failure, and 3-D RBSM is applicable to simulate 3-D behavior as well as the confinement effect of concrete. Analytical results in terms of load–displacement curves and crack pattern are compared with the experimental results. Three-dimensional deformations, strut widths and cross-sectional stress distribution are investigated analytically and compared with the experimental results to determine 3-D behavior in detail. The 3-D effects in short deep beams are clarified.     

Enhancement of thermostability of kojibiose phosphorylase from Thermoanaerobacter brockii ATCC35047 by random mutagenesis

Random mutation by error-prone PCR was introduced into kojibiose phosphorylase from Thermoanaerobacter brockii ATCC35047. One thermostable mutant enzyme, D513N, was isolated. The D513N mutant enzyme showed an optimum temperature of 67.5-70 degrees C (the wild type, 65 degrees C), and thermostability up to 67.5 degrees C (the wild type, up to 60 degrees C). The half-lives of D513N were estimated to be 135 h at 60 degrees C, 110 min at 70 degrees C and 6 min at 75 degrees C, respectively. They were about 1.6-fold, 7-fold and 6-fold longer than those of the wild-type enzyme, respectively.     

Decomposition of extremely hard-to-degrade animal proteins by thermophilic bacteria

Hard-to-degrade animal proteins are ubiquitously present throughout animal bodies. Enormous numbers of these proteins generated in the meat industry are converted to industrial wastes, the disposal of which is tremendously difficult. Most hard-to-degrade animal proteins are currently disposed of by incineration; however, this method has ecological disadvantages in terms of an apparent energy loss and the production of a large amount of carbon dioxide. As a result, an innovative solution to these problems has been sought. In this review, we focus on the degradation of three hard-to-degrade animal proteins (extracellular matrix proteins, collagen in particular, keratin, and prion proteins) and discuss the decomposing capability of thermophilic bacteria. These proteins are strongly resistant to proteinases because of their structural features; therefore, new approaches employing bacterial proteases with strong activity and broad specificity are required for practical application.     

Parameters affecting the frequencies of transformation and co-transformation with synthetic oligonucleotides in yeast.

Factors influencing the direct transformation of the yeast Saccharomyces cerevisiae with synthetic oligonucleotides were investigated by selecting for cyc1 transformants that contained at least partially functional iso-1-cytochrome c. Approximately 3 x 10(4) transformants, constituting 0.1% of the cells, were obtained by using 1 mg of oligonucleotide in the reaction mixture. Carrier, such as heterogeneous oligonucleotides, enhanced transformation frequencies. Transformation frequencies were dramatically reduced if the oligonucleotides had a large number of mismatches or had terminally located mismatches. Transformation with oligonucleotides, but not with linearized double-strand plasmid, was efficient in a rad52- strain, suggesting that the pathway for transformation with oligonucleotides is different from that with linearized double-strand plasmid. We describe a procedure of co-transformation with two oligonucleotides, one correcting the cyc1 defect of the target allele in the host strain, and the other producing a desired amino acid alteration elsewhere in the iso-1-cytochrome c molecule; approximately 20% of the transformants obtained by co-transformation contained these desired second alterations.     

Biochemical properties of two isoforms of trypsin purified from the Intestine of skipjack tuna (Katsuwonus pelamis)

Two trypsins (A and B) from the intestine of skipjack tuna (Katsuwonus pelamis) were purified by Sephacryl S-200, Sephadex G-50 and DEAE-cellulose with a 177- and 257-fold increase in specific activity and 23% and 21% recovery for trypsin A and B, respectively. Purified trypsins revealed a single band on native-PAGE. The molecular weights of both trypsins were 24 kDa as estimated by size exclusion chromatography and SDS–PAGE. Trypsin A and B exhibited the maximal activity at 55 °C and 60 °C, respectively, and had the same optimal pH at 9.0. Both trypsins were stable up to 50 °C and in the pH range from 6.0 to 11.0. Both trypsin A and B were stabilised by calcium ion. Activity of both trypsins continuously decreased with increasing NaCl concentration (0–30%) and were inhibited by the specific trypsin inhibitors – soybean trypsin inhibitor and N-p-tosyl-l-lysine chloromethyl ketone. Apparent K_m and K_cat of trypsin A and B were 0.22–0.31 mM and 69.5–82.5 S⁻¹, respectively. The N-terminal amino acid sequences of the first 20 amino acids of trypsin A and B were IVGGYECQAHSQPPQVSLNA and IVGGYECQAHSQPPQVSLNS, respectively.     

Pharmacological studies on basic ethers (R111 and R97) with antispasmodic activity

Pharmacological properties and acute toxicity of 2-tolyl 1-phenyl-3-(2-methylpiperidino) propyl ether methyl bromide (R111) and 2-chlorophenyl 1-phenyl-3-(2-methylpiperidino) propyl ether methyl iodide (R97) were examined. The results obtained were as follows: (1) In the analgesic effects, RIII and R97 inhibited markedly the acetic acid-induced writhing in mice, but in reducing pain induced by heat, R111 and R97 showed negative results. The local anesthetic effect of R111 was approximately equal to that of procaine. R111 and R97 showed no effects on spontaneous locomotion, the convulsion induced by strychnine or pentetrazol, and normal body temperature. (2) R111 and R97 antagonized acetylcholine, barium chloride, nicotine and serotonine-induced spasm, but not that of histamine and bradykinin. In particular they possessed marked anti-barium chloride activity, where their effects were 20 to 30 times more active than that of papaverine. (3) R111 and R97 indicated weak mydriatic activity. (4) R111 and R97 showed inhibitory effects on the pilocarpine-induced sialic secretion and the propulsive movements of the small intestine, but their inhibitory effects on the gastric secretion were relatively weak. (5) R111 and R97 displayed protective effects in Shay's ulcer, but had no curative effects on acetic acid ulcer. (6) R111 and R97 induced temporary reduction of arterial blood pressure and blood flow immediately after the administration of the test compounds in anesthetized rabbits. However, these agents induced no change in ECG, heart rate and respiration. (7) Intraperitoneally administered R111 and R97 were effective in inhibiting the carrageenin-induced edema in the hind paw of rats. From the above results, it may be considered that R111 and R97 have together strong cholinergic blocking and muscotropic antispasmodic effects, moreover, no significant effects on the central nervous system.