Electrical conductivity and gas sensitivity of Zn-Sb-O thick films

The thick film of Zn-Sb-O was prepared by coating the paste of nanoparticles mixture (Sb₂O₃:ZnO=1:3) on the alumina substrate, followed by sintering at 500-900 °C for 2 h in air. The electrical resistance and gas-sensing properties to benzene, alcohol and acetone of Zn-Sb-O films were found to be dependent on the change of phase structure caused by sintering temperature.     

高温季节食醋生产中影响酒精发酵的因素及改进措施

该文以镇江香醋生产为例，分析了高温季节食醋生产过程中影响酒精发酵的因素，并提出了改进措施。     

High-strain-rate superplasticity of nanocrystalline aluminum alloy 1570

The structure and mechanical properties of nanocrystalline aluminum alloy 1570 obtained by means of severe plastic deformation have been studied. Being tested in a temperature range from 300 to 400°C, the alloy exhibits high-strain-rate superplasticity. At 400°C, the superplasticity is manifested in a very broad range of strain rates, extending from 5 × 10^?3 to 1 s^?1.     

Studying chaotic microwave oscillations in a TWO with depressed collector

Broadband chaotic oscillations were monitored in a depressed potential collector of a traveling-wave oscillator (TWO). This signal appears due to the oscillations of a virtual cathode, which is formed in the spent electron beam under the action of retarding fields existing in the multistage depressed collector.     

Optical properties of strain-compensated InAs/InGaAsN/GaAsN superlattices

The optical properties of heterostructures comprising InAs/InGaAsN quantum wells in strain-compensated GaAsN/InGaAsN superlattices have been studied. It is demonstrated that, using such superlattices of various design and thickness and with additional InAs monolayer spacers, it is possible to control the wavelength of room-temperature emission from InGaAsN quantum wells within 1.3–1.6 μm without deteriorating the output radiation characteristics, which opens additional prospects for the development of lasers on GaAs substrates for telecommunication applications.     

Development of polyurethane elastomer composite materials by addition of milled fiberglass with coupling agent

Polyurethane elastomer composites were developed using milled fiberglass and their mechanical properties were studied. In particular, the organically chemical treatment of the milled fiberglass was investigated in detail. It was demonstrated that both strength and toughness of the resulting elastomer composites were improved considerably with the addition content of fiberglass. Furthermore, it was indicated that the optimal properties can be achieved by the proper addition of milled fiberglass that was chemically treated using coupling agent.     

Properties of gasars-metallic materials with pores formed by released hydrogen

We developed a new type of porous materials with anisotropic structure based on a large number of metals. It is shown that these material, called gasars, have properties different from the properties of the other porous materials. Thus, the strength of gasars is much higher than the strength of powder materials with the same porosity and their impact toughness is readily regulated by the sizes of the pores. The internal structures of gasars and possible versions of the types of pores in these materials are strongly diversified, which makes the spectrum of their possible applications very wide. We discuss some specific directions of the potential applications of gasars. The results of measurements of the thermal conductivity of gasars and monolithic specimens are presented. It is shown that, for a certain level of porosity, the specific thermal conductivity of gasars is higher than for monolithic materials. We also make some basic conclusions concerning the characteristics of new porous materials. __________ Translated from Fizyko-Khimichna Mekhanika Materialiv, Vol. 43, No. 5, pp. 125–127, September–October, 2007.     

电子商务中的PKI、SSL与SET的技术分析

PKI是目前在电子商务中安全传输方案，SSL和SET两种安全的电子交易协议，在网上交易中有着广泛地应用，是大多数在线支付所采用的支付协议。这里在探讨PKI、SSL、SET技术原理的基础上，对它们各自的作用、技术实现、工作漉程等进行了描述；对它们之间的联系、区别、应用范围进行了深入的分析。     

Vibratory drier for the chemical industry

Modern designs are examined, and technical data presented for vibratory electric and convection driers, driers with infra-red sources, and steam driers.