Parallel path consistency

Filtering algorithms are well accepted as a means of speeding up the solution of the consistent labeling problem (CLP). Despite the fact that path consistency does a better job of filtering than arc consistency, AC is still the preferred technique because it has a much lower time complexity. We are implementing parallel path consistency algorithms on multiprocessors and comparing their performance to the best sequential and parallel arc consistency algorithms.^(1,2) (See also work by Kerethoet al. ⁽³⁾ and Kasif⁽⁴⁾) Preliminary work has shown linear performance increases for parallelized path consistency and also shown that in many cases performance is significantly better than the theoretical worst case. These two results lead us to believe that parallel path consistency may be a superior filtering technique. Finally, we have implemented path consistency as an outer product computation and have obtained good results (e.g., linear speedup on a 64K-node Connection Machine 2).     

Vitamin allowance of cosmonauts during preflight training and after completing short space flights

Supply of the main and doubling crews of cosmonauts with vitamins C, A, D, E, B1, B2, B6, PP, and B12, folic acid and carotinoids was studied during training and after the completion of short-term space flights (from 4 to 13 days). As the result of the investigation conducted during the intensive training, 1 month before the space flight some cases of certain vitamins deficiency were revealed. Administration of additional vitamins during 2 weeks before the flight led to a rise in the cosmonauts' supply with vitamins. The findings obtained after the short-term space flights evidence an intensive metabolization of vitamins and increased vitamin requirements during this period.     

Silicon-to-steel bonding using rapid thermal annealing

This paper presents the rapid, low-temperature bonding between silicon and steel using the rapid thermal annealing process. Three different thin-film adhesion layer systems including silver, gold, and nickel were utilized as the intermediate bonding material to assist the eutectic Pb/Sn bonding between silicon and steel. The bonding temperature was set at 220/spl deg/C for 20 s, with a 20-s ramp-up time. Five experiments were conducted to determine the strength of the bond, including static tensile and compressive four-point bend tests, axial extension tests, tensile bending fatigue tests, and corrosion resistance tests. The test results have shown that the gold adhesion layer is the most robust, demonstrating minimal creep during fatigue tests, no delamination during the tensile or compressive four-point bend tests, and acceptable strength during the axial extension tests. Additionally, all adhesion layers have withstood four months of submersion in various high-temperature solutions and lubricants without failure. Simulations of the axial stresses and strains that developed during the four-point bend and axial extension tests were performed and showed that the presence of the silicon die provides a local reinforcement of the bond as observed in the experimental tests.     

Vibratory drier for the chemical industry

Modern designs are examined, and technical data presented for vibratory electric and convection driers, driers with infra-red sources, and steam driers.     

Enhancing echo cancellation via estimation of delay

The advent of packetized audio transmission, such as voice over IP (VoIP), has resulted in challenging requirements for echo cancellation technology. One key aspect of this technology is the need to characterize, quickly and accurately, the echo paths in the transmission media. Echo paths consist of a constant time delay with no echo signal and active regions in which the echo signal is present. When an adaptive filter echo cancellation algorithm is used, its performance can be greatly increased, and its complexity can be reduced if it is only applied to the active regions. This requires an algorithm to estimate the constant delay and locate the active regions. Traditionally, delay estimation has been based on direct application of cross-correlation. This method has poor performance because the input signals are highly correlated and has a high implementation cost because many cross-correlation lags have to be computed for longer time delays. The delay estimation addressed in this paper has two major advantages over the traditional methods. The first is that it has improved performance because the input signals are processed to have less correlation. The second is that the implementation cost is significantly reduced because fewer cross-correlation lags are computed, and an efficient method to estimate lags is created.     

组件式GIS在密钥管理系统中的应用

本文讲述了利用组件式GIS技术,在密钥管理系统中进行GIS集成二次开发,实现设备地图技术,为密钥管理系统业务中的保密设备管理提供图形化、可视化支持,并给出了基于组件式GIS的密钥管理系统模型。     

Managing logical channel configurations in complex satellite architectures

As a result of the increased switching complexity of many communications satellites, often transponders are available with a variety of configuration options offering flexibility in power, bandwidth, and coverage. Many of these configurations share resources that prevent them from being simultaneously active, making it a challenge to understand and manage the satellite capacity inventory. In this paper we define the logical channel configuration (LCC) as an unambiguous unit of the inventory and present a novel method of modelling the interdependencies between these LCCs using linear algebra. In particular, a projector matrix is defined which can be used to update the activation state of all LCCs when the state of one or more of these is changed. As a result, a number of valid LCC scenarios can be easily generated and evaluated for optimal use of the satellite resources. Copyright © 2005 John Wiley & Sons, Ltd.     

The effect of laser radiation on the formation of oriented cadmium sulfide layers under highly nonequilibrium conditions

The effect of low-power laser radiation on the formation of oriented cadmium sulfide layers from a vapor phase on a substrate cooled with liquid nitrogen (highly nonequilibrium conditions) is studied. The results of technological experiments, the results of a study of electron diffraction (electron diffraction patterns), and condensation diagram data are reported. It is found that, depending on the substrate temperature, laser radiation can both improve and worsen the crystal quality of films. It is shown that a condensation diagram of cadmium sulfide layers formed on a substrate exposed to low-power laser radiation is shifted to higher temperatures relative to a condensation diagram obtained without laser radiation. The experimental results are interpreted in the context of a solitonic heteroepitaxy model.     

An integrated system to remote monitor and control anaerobic wastewater treatment plants through the internet.

The TELEMAC project brings new methodologies from the Information and Science Technologies field to the world of water treatment. TELEMAC offers an advanced remote management system which adapts to most of the anaerobic wastewater treatment plants that do not benefit from a local expert in wastewater treatment. The TELEMAC system takes advantage of new sensors to better monitor the process dynamics and to run automatic controllers that stabilise the treatment plant, meet the depollution requirements and provide a biogas quality suitable for cogeneration. If the automatic system detects a failure which cannot be solved automatically or locally by a technician, then an expert from the TELEMAC Control Centre is contacted via the internet and manages the problem.