CeO2–ZrO2–La2O3 (CZL) mixed oxides were prepared by citric acid sol–gel method. The as-received gel was calcined at 500, 700, 900 and 1050 °C to obtain the so-called C5, C7, C9 and CK, respectively. The C5, C7 and C9 powders were impregnated with H2PtCl6 and then calcined at 500 °C to prepare P5C5, P5C7 and P5C9, respectively. The impregnated CK powders were calcined at 500, 700 and 900 °C to prepare P5CK, P7CK and P9CK, respectively. The XRD and XPS analyses show that the surface distribution of Pt is evidently influenced by the structural and textural properties of the support. The CO adsorption followed by FTIR reveals that the dispersion and the chemisorption sites of Pt are reduced as the calcination temperature of CZL support increases. The chemisorption ability of the CK samples is even completely deactivated. The encapsulation mechanism, which has been applied to explain the so-called strong metal–support interaction (SMSI) after reductive treatment, is introduced here to demonstrate the abnormal observations though the samples were prepared in oxidative atmosphere. The HRTEM results also confirm this explanation. The effects of oxygen vacancies, the chemisorption sites on the Pt surface and Pt/Ce interfacial sites on the three-way catalytic activities are discussed. 相似文献
By using the in situ IR spectroscopy, the superoxide species (O2−), characterized by the O–O stretching peak at 1130 cm−1, was detected on the SrF2/La2O3 catalyst at temperatures up to 973 K. The introduction of 18O2 isotope caused the 1130 cm−1 peak to shift to lower wavenumbers (1095 and 1064 cm−1), consistent with the assignment of the spectra to the superoxide species. A good correlation between the rate of the disappearance
of the O2− species and that of the formation of C2H4 was observed, suggesting that O2− was the active oxygen species responsible for the oxidative coupling of methane (OCM) on the SrF2/La2O3 catalyst. This conclusion was reinforced by the EPR experiments (gxx = 2.0001, gyy = 2.0045, gzz = 2.0685), showing that O2− was the only paramagnetic oxygen species detectable on the O2-preadsorbed SrF2/La2O3 catalyst. These results suggest that superoxide O2− can be a stable active oxygen species, whose role in the OCM reaction cannot be overlooked. 相似文献
With the rapid development of information technology, social media has been widely used, and Internet information has been exploded, and consumers may experience information overload. Recommender systems using the social recommendation method that integrates social relationship information can provide users with target information that meets their needs. However, most of the existing methods only rely on the user’s ordinary friends to make recommendations, neglecting another influential group, the opinion leaders. In this study, we propose a new social recommendation method based on opinion leaders. The proposed method assumes that the influence of the opinion leader on the user is much greater than that of the user’s ordinary friends. The experimental results on two real datasets show that the proposed method not only has a better recommendation effect than the state-of-the-art recommendation algorithms, but also has a good performance in the cases of cold-start users.
Circulating fluidized bed combustion (CFBC) ash can be used as supplementary cementitious material for concrete production for its high pozzolanic activity. We investigated the effect of curing conditions on the hydration and performance of CFBC ash-Portland cement system (30: 70, by mass) including hydration products, paste microstructure, linear expansion ratio, chemically combined water content and compressive strength. The results show that tobermorite rather than ettringite is generated under the condition of autoclaved curing. The expansion and mortar strength of the system cured in water is higher than those cured in air at a given age, and the strength and bulk volume may retract under the condition of air curing. In addition, autoclaved curing facilitates the increase of strength gain at early curing ages (the increase rate lowers down in the following ages) and the improvement of system volume stability. It is suggested that sufficient water is necessary for the curing of CFBC ash cementitious system, and autoclaved curing may be considered where volume stability is a primary concern. 相似文献