The SMSI between supported platinum and CeO2–ZrO2–La2O3 mixed oxides in oxidative atmosphere

CeO₂–ZrO₂–La₂O₃ (CZL) mixed oxides were prepared by citric acid sol–gel method. The as-received gel was calcined at 500, 700, 900 and 1050 °C to obtain the so-called C5, C7, C9 and CK, respectively. The C5, C7 and C9 powders were impregnated with H₂PtCl₆ and then calcined at 500 °C to prepare P5C5, P5C7 and P5C9, respectively. The impregnated CK powders were calcined at 500, 700 and 900 °C to prepare P5CK, P7CK and P9CK, respectively. The XRD and XPS analyses show that the surface distribution of Pt is evidently influenced by the structural and textural properties of the support. The CO adsorption followed by FTIR reveals that the dispersion and the chemisorption sites of Pt are reduced as the calcination temperature of CZL support increases. The chemisorption ability of the CK samples is even completely deactivated. The encapsulation mechanism, which has been applied to explain the so-called strong metal–support interaction (SMSI) after reductive treatment, is introduced here to demonstrate the abnormal observations though the samples were prepared in oxidative atmosphere. The HRTEM results also confirm this explanation. The effects of oxygen vacancies, the chemisorption sites on the Pt surface and Pt/Ce interfacial sites on the three-way catalytic activities are discussed.     

高寿命弥散型透气砖的研制及应用

采用电熔Ａｌ２Ｏ３添加适量氧化铬和复合结合剂，试制出具有较好的抗周期性热冲击，抗侵蚀渗透和固结作用的高寿命弥散型透气砖。该砖透气性能理想，工作安全、可靠，实现了透气砖寿命与包龄同步。     

氯化聚乙烯接枝氯乙烯聚合速率及传热

本文用气相色谱技术研究氯化聚乙烯(CPE)-接枝(g)-氯乙烯(VC)聚合动力学,对不同引发剂体系分析热负荷分布,并对7 m~3聚合釜传热面进行校核。     

低速小型无人机中的复合材料结构及分析

复合材料结构在小型无人驾驶飞机中占据着主导地位。随着无人机的发展，以复合材料为主体的无人机结构型式已有多种。本文就小型无人机复合材料结构的特点进行分析，给出了一些典型的复合材料飞机结构型式，并进行了结构布局选择分析和结构设计分析。     

Isotopic Oxygen Exchange and EPR Studies of Superoxide Species on the SrF2/La2O3 Catalyst

By using the in situ IR spectroscopy, the superoxide species (O₂⁻), characterized by the O–O stretching peak at 1130 cm⁻¹, was detected on the SrF₂/La₂O₃ catalyst at temperatures up to 973 K. The introduction of ¹⁸O₂ isotope caused the 1130 cm⁻¹ peak to shift to lower wavenumbers (1095 and 1064 cm⁻¹), consistent with the assignment of the spectra to the superoxide species. A good correlation between the rate of the disappearance of the O₂⁻ species and that of the formation of C₂H₄ was observed, suggesting that O₂⁻ was the active oxygen species responsible for the oxidative coupling of methane (OCM) on the SrF₂/La₂O₃ catalyst. This conclusion was reinforced by the EPR experiments (g_xx = 2.0001, g_yy = 2.0045, g_zz = 2.0685), showing that O₂⁻ was the only paramagnetic oxygen species detectable on the O₂-preadsorbed SrF₂/La₂O₃ catalyst. These results suggest that superoxide O₂⁻ can be a stable active oxygen species, whose role in the OCM reaction cannot be overlooked.     

Synthesis and characterization of poly(butyl acrylate)/silica and poly(butyl acrylate)/silica/poly(methyl methacrylate) composite particles

Poly(butyl acrylate)/poly(methyl methacrylate) (PBA/PMMA) core–shell particles embedded with nanometer‐sized silica particles were prepared by emulsion polymerization of butyl acrylate (BA) in the presence of silica particles preabsorbed with 2,2′‐azobis(2‐amidinopropane)dihydrochloride (AIBA) initiator and subsequent MMA emulsion polymerization in the presence of PBA/silica composite particles. The morphologies of the resulting PBA/silica and PBA/silica/PMMA composite particles were characterized, which showed that AIBA could be absorbed effectively onto silica particles when the pH of the dispersion medium was greater than the isoelectric potential point of silica. The critical amount of AIBA added to have stable dispersion of silica particles increased as the pH of the dispersion medium increased. PBA/silica composite particles prepared by in situ emulsion polymerization using silica preabsorbed with AIBA showed higher silica absorption efficiency than did the PBA/silica composite particles prepared by direct mixing of PBA latex and silica dispersion or by emulsion polymerization in which AIBA was added after the mixing of BA and silica. The PBA/silica composite particles exhibited a raspberrylike morphology, with silica particles “adhered” to the surfaces of the PBA particles, whereas the PBA/silica/PMMA composite latex particles exhibited a sandwich morphology, with silica particles mainly at the interface between the PBA core and the PMMA shell. Subsequently, the PBA/silica/PMMA composite latex obtained had a narrow particle size distribution and good dispersion stability. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3425–3432, 2006     

A social recommendation method based on opinion leaders

With the rapid development of information technology, social media has been widely used, and Internet information has been exploded, and consumers may experience information overload. Recommender systems using the social recommendation method that integrates social relationship information can provide users with target information that meets their needs. However, most of the existing methods only rely on the user’s ordinary friends to make recommendations, neglecting another influential group, the opinion leaders. In this study, we propose a new social recommendation method based on opinion leaders. The proposed method assumes that the influence of the opinion leader on the user is much greater than that of the user’s ordinary friends. The experimental results on two real datasets show that the proposed method not only has a better recommendation effect than the state-of-the-art recommendation algorithms, but also has a good performance in the cases of cold-start users.

     

海藻酸钠与纳米晶纤维素共混膜制备与性能研究

借助冷冻干燥技术制备了海藻酸钠与纳米晶纤维素共混膜以达到增强目的;探讨了不同含量的纳米晶纤维素与海藻酸钠共混膜的微观形貌、力学性能、吸水性能及孔隙率的变化;综合评价确定最佳的纳米晶纤维素含量在0.75%至1.00%之间。     

Effect of curing conditions on the hydration and performance of CFBC ash cementitious system

Circulating fluidized bed combustion （CFBC） ash can be used as supplementary cementitious material for concrete production for its high pozzolanic activity. We investigated the effect of curing conditions on the hydration and performance of CFBC ash-Portland cement system （30： 70, by mass） including hydration products, paste microstructure, linear expansion ratio, chemically combined water content and compressive strength. The results show that tobermorite rather than ettringite is generated under the condition of autoclaved curing. The expansion and mortar strength of the system cured in water is higher than those cured in air at a given age, and the strength and bulk volume may retract under the condition of air curing. In addition, autoclaved curing facilitates the increase of strength gain at early curing ages （the increase rate lowers down in the following ages） and the improvement of system volume stability. It is suggested that sufficient water is necessary for the curing of CFBC ash cementitious system, and autoclaved curing may be considered where volume stability is a primary concern.     

基于PIC单片机的智能充电器设计

针对现有充电器存在的问题和不足,设计了一款基于PIC单片机的智能充电器.可利用单片机功能的灵活性对电池快速充电,通过按键对充电器进行设定,具有良好的人机交互.单片机可以直接生成半桥波,降低成本,并可通过采样电压和电流直接控制占空比来改变输出电压.