A method of estimating the rate of miniature end-plate potential occurrences based on parametric time series modeling

This paper presents a parametric method of estimating the rate of miniature end-plate potential (MEPP) occurrences. We consider the case where the rate of MEPP occurrences is raised by the constant deporalization of presynaptic terminals by using high-concentration potassium solutions. Under such conditions, since MEPP occurrences cannot be identified by eye due to waveform superposition, it is necessary to estimate the rate with the aid of statistical techniques instead of counting the occurrences by eye. In this paper it is assumed according to the literatures that the MEPP data are modeled as a stationary Poisson impulse process filtered by the linear system the impulse response function of which is the sum of two exponentials. Then, the discretized MEPP data are shown to be a second-order autoregressive (AR(2)) process, driven by the sum of 2 first-order moving average (MA(1)) processes (the residual time series). An explicit formula for estimating the rate can be derived by combining the second- and third-order moments of the residual time series. The validity of the proposed estimation method is verified through Monte Carlo simulations in which the rate is varied ranging from 100 to 10,000 s-1. Likewise, the proposed method is applied to estimation of the rate of actual MEPP data, which were observed at the frog's neuromuscular junction under high-concentration potassium solutions.     

A 128-kb FeRAM macro for contact/contactless smart-card microcontrollers

This paper describes a 128-kb FeRAM macro for smart-card microcontrollers. This macro, which was designed and fabricated using a 0.35-/spl mu/m three-metal CMOS and a Capacitor-on-Metal/Via-stacked-Plug (CMVP) process technology, is ideally suited for recent system LSIs such as smart-card microcontrollers. It has a flexible memory size ranging from 32 to 128 kb, a low consumption current of 0.3 mA, and endurance of more than 10/sup 8/ write/read cycles under a wide range of supply voltages, from 2.7 to 5.5 V. These characteristics, which are required of not only contact-type smart-card microcontrollers but also contactless-type ones, were achieved by using four newly developed circuit technologies: 1) a three-metal CMVP memory cell; 2) a voltage-regulating architecture; 3) a main/sub bitline and wordline structure; and 4) a dynamic-type offset sense amplifier.     

A 146-mm/sup 2/ 8-gb multi-level NAND flash memory with 70-nm CMOS technology

An 8-Gb multi-level NAND Flash memory with 4-level programmed cells has been developed successfully. The cost-effective small chip has been fabricated in 70-nm CMOS technology. To decrease the chip size, a one-sided pad arrangement with compacted core architecture and a block address expansion scheme without block redundancy replacement have been introduced. With these methods, the chip size has been reduced to 146 mm/sup 2/, which is 4.9% smaller than the conventional chip. In terms of performance, the program throughput reaches 6 MB/s at 4-KB page operation, which is significantly faster than previously reported and very competitive with binary Flash memories. This high performance has been achieved by the combination of the multi-level cell (MLC) programming with write caches and with the program voltage compensation technique for neighboring select transistors. The read throughput reaches 60 MB/s using 16I/O configuration.     

Deposition of lead and cadmium released by cigarette smoke in dental structures and resin composite

Cigarette smoke is a significant source of cadmium, lead, and toxic elements, which are absorbed into the human organism. In this context, the aim of this study was to investigate in vitro the presence of toxic elements, cadmium, and lead deriving from cigarette smoke in the resin composite, dentine, and dental enamel. Eight cylindrical specimens were fabricated from resin composite, bovine enamel, and root dentin fragments that were wet ground and polished with abrasive paper to obtain sections with 6‐mm diameter and 2‐mm thickness. All specimens were exposed to the smoke of 10 cigarettes/day during 8 days. After the simulation of the cigarette smoke, the specimens were examined with scanning electron microscopy (SEM) and the energy‐dispersive X‐ray analysis. In the photomicrographic analysis in SEM, no morphological alterations were found; however, the microanalysis identified the presence of cadmium, arsenic, and lead in the different specimens. These findings suggest that the deposition of these elements derived from cigarette smoke could be favored by dental structures and resin composite. Microsc. Res. Tech., 2010. © 2010 Wiley‐Liss, Inc.     

Preparation and properties of CuInS2 thin film prepared from electroplated precursor

Thin CuInS₂ films were prepared by sulfurization of Cu/In bi-layers. First, the precursor layer was electroplated onto the treated surface of Mo-coated glass. Observation of the cross-section prepared by focused ion beam (FIB) etching revealed that the void-free film was initially formed on the top surface of the precursor layer and continued to grow until the advancing front of the film reached the Mo layer. The nucleation of voids near the bottom of the CuInS₂ film followed. To determine whether the condition of the Cu/In alloy influences the CuInS₂ quality we investigated the Cu/In alloy state using FIB. We found that the annealed precursor of low Cu/In ratio (1.2) has several voids in the mid position in the layer compared with Cu-rich precursor (1.6). The cross-sectional view of the Cu-rich absorber layer is uniform compared with the low copper absorber layer. Thin film solar cells were fabricated using the CuInS₂ film (Cu/In ratio: 1.2) as an optical absorber layer. It was found that the optimization of a sulfurization period is important in order to improve the cell efficiency. We have not yet obtained good results with high Cu-rich absorber because of a blister problem. This blister was found before sulfurization. So, we are going to solve this blister problem before sulfurization.     

Carbon nanotube enables quantum leap in oil recovery

A novel sealing material based on a CNT-rubber composite was developed for use in producing oil from deep, hot reservoirs. Fully dispersed and better bondings are two critical advances that enhance its mechanical properties. Authors solved the critical issues and clarified the mechanism of nano network reinforcement using test data. The resulting sealing solution underwent field tests around the world, and it marks a rare success story for the use of nanotechnology in the oilfield.