基于视频编辑模型的视频淡入、淡出和叠化的检测

该文基于视频编辑模型,推导出几个能用于检测镜头淡入、淡出和叠化的重要特征:方差、边界强度、有效平均梯度和双重色度差。通过比较,我们选取了方差序列和双重色度差特征作为检测依据,首先利用方差序列检测淡入、淡出和可能的叠化位置,以保证取得高的查全率,然后利用双重色度差序列确认叠化以提高检测准确率。由于检测对DC序列进行,算法计算时间复杂度比较低。     

The Fabrication and Characterization of Single‐Component Polymeric White‐Light‐Emitting Diodes

By using Ni⁰‐mediated polymerization, we have systematically synthesized a series of fluorene‐based copolymers composed of blue‐, green‐, and red‐light‐emitting comonomers with a view to producing polymers with white‐light emission. 2,7‐Dibromo‐9,9‐dihexylfluorene, {4‐(2‐[2,5‐dibromo‐4‐{2‐(4‐diphenylamino‐phenyl)‐vinyl}‐phenyl]‐vinyl)‐phenyl}‐diphenylamine (DTPA), and 2‐{2‐(2‐[4‐{bis(4‐bromo‐phenyl)amino}‐phenyl]‐vinyl)‐6‐tert‐butyl‐pyran‐4‐ylidene}‐malononitrile (TPDCM) were used as the blue‐, green‐, and red‐light‐emitting comonomers, respectively. It was found that the emission spectra of the resulting copolymers could easily be tuned by varying their DTPA and TPDCM content. Thus with the appropriate red/green/blue (RGB) unit ratio, we were able to obtain white‐light emission from these copolymers. A white‐light‐emitting diode using the polyfluorene copolymer containing 3 % green‐emitting DTPA and 2 % red‐emitting TPDCM (PG3R2) with a structure of indium tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonic acid)/PG3R2/Ca/Al was found to exhibit a maximum brightness of 820 cd m^–2 at 11 V with Commission Internationale de L'Eclairage (CIE) coordinates of (0.33,0.35), which are close to the standard CIE coordinates for white‐light emission (0.33,0.33).     

ZnS/CuInS2/Mo/钠钙玻璃衬底上射频溅射ZnO∶Al薄膜的SEM研究

结合ZnO薄膜在Cu-III-VI2基薄膜太阳电池上的应用，采用射频磁控溅射技术以陶瓷ZnO∶Al2O3为靶材在ZnS/CuInS2/Mo/钠钙玻璃衬底上于固定沉积条件下低温（200℃）制备了铝掺杂氧化锌（ZnO∶Al）薄膜. 运用扫描电子显微镜研究了底层材料特别是ZnS和CuInS2的生长参数对沉积的ZnO∶Al薄膜的表面形貌的影响. 实验发现，衬底材料中硫含量的增加（无论来自ZnS还是来自CuInS2) ，都会引起沉积ZnO∶Al薄膜结晶质量的提高，而金属含量的增大将有利于薄膜均匀性的改进.     

2/spl times/4 optical add-drop module with no difference in propagation length

We developed a micromachined X-type 2/spl times/4 optical add-drop module (OADM) featuring no difference in propagation length. Four pairs of lensed fibers are aligned in "X" position, and four micromirrors are located between the pairs of optical fibers. The OADM was fabricated utilizing a silicon-on-insulator process. Electrostatic comb actuators can be driven up to 90 /spl mu/m to change the light path within 1 ms. The insertion loss and the on-off ratio were less than 3 and 70 dB, respectively. The loss uniformity in every channel was 1.5 dB.     

Research activities on next-generation mobile communications and services in Korea

In this article we present a perspective on next-generation mobile communications and services. As a preliminary research work on next-generation mobile communications, we exploit what next-generation mobile services will be (S. Ryu et al., May 2003). We define next-generation mobile services as a hierarchy of services consisting of three different service levels: the service areas, the service functionalities, and the service technologies. We derive these service levels by means of scenario-based analysis. Next we propose conceptual reference network architecture, focusing on the realization of the service technologies. We divide the network into four different parts: a user equipments and access part, a network service provisioning layer part, a network control layer part, and non-mobile network operator service pan, according to characteristics of information and service flows within a network. In this reference network architecture, service elements such as servers, processors, and gateways are placed in each network part to support the derived next-generation mobile services. Finally, we give a brief introduction of research and development activities for next-generation mobile communication systems and services in Korea.     

Dielectric reliability of stacked Al2O3–HfO2 MIS capacitors with cylinder type for improving DRAM data retention characteristics

Dielectric reliability in Al₂O₃(2–3.1nm)–HfO₂(3nm) stack capacitor with Metal–Insulator–Si(MIS) structure is investigated in this paper. We propose an optimized capacitor process through the Time–Dependent Dielectric Breakdown (TDDB) data under various process conditions. Furthermore, due to asymmetric current at both negative and positive voltage stress polarities, we show different lifetime extrapolation by a fluence–driven model. As a result, the maximum allowed operating voltage is projected to be 1.7V (failure rate 10ppm during 10year @ 85°C) for Data “0” retention lifetime.     

I-WAP: an intelligent WAP site management system

The popularity regarding wireless communications is such that more and more WAP sites have been developed with wireless markup language (WML). Meanwhile, to translate hypertext markup language (HTML) pages into proper WML ones becomes imperative since it is difficult for WAP users to read most contents designed for PC users via their mobile phone screens. However, for those sites that have been maintained with hypertext markup language (HTML), considerable time and manpower costs will be incurred to rebuild them with WML. In this paper, we propose an intelligent WAP site management system to cope with these problems. With the help of the intelligent management system, the original contents of HTML Web sites can be automatically translated to proper WAP content in an efficient way. As a consequence, the costs associated with maintaining WAP sites could be significantly reduced. The management system also allows the system manager to define the relevance of numerals and keywords for removing unimportant or meaningless contents. The original contents will be reduced and reorganized to fit the size of mobile phone screens, thus reducing the communication cost and enhancing readability. Numerical results gained through various experiments have evinced the effective performance of the WAP management system.     

Multi-Channel Assignment Schemes and Handoff Study in CDMA Cellular Systems

The CDMA system promisingly provides more capacity than AMPS. However, providing multi-channels for a CDMA system is requisite for satisfying the demand of capacity. In this paper, three schemes of multi-channel assignment are proposed. Based on computer simulation, performance measures, e.g. blocking probabilities, the overall capacity, the capacity of each channel, and the number of re-accesses, are obtained. Since the same frequency channel may be assigned to two adjacent cells, the effect of soft handoff is also considered. Numerical results demonstrate that scheme 3 (i.e., the random re-selection scheme) performs the best of the proposed three schemes because it provides the highest system capacity while keeping the cost of accessing channels (i.e., in terms of number of channel accesses) to a minimum.     

Comprehensive study on a novel bidirectional tunnelingprogram/erase NOR-type (BiNOR) 3-D flash memory cell

In this paper a recently proposed bidirectional tunneling program/erase (P/E) NOR-type (BiNOR) flash memory is extensively investigated. With the designated localized p-well structure, uniform Fowler-Nordheim (FN) tunneling is first fulfilled for both program and erase operations in NOR-type array architecture to facilitate low power applications. The BiNOR flash memory guarantees excellent tunnel oxide reliability and is provided with fast random access capability. Furthermore, a three-dimensional (3D) current path in addition to the conventional two-dimensional (2D) conduction is proven to improve the read performance. The BiNOR flash memory is thus promising for low-power, high-speed, and high-reliability nonvolatile memory applications     

Thermally Controlled,Patterned Graphene Transfer Printing for Transparent and Wearable Electronic/Optoelectronic System

Graphene has been highlighted as a platform material in transparent electronics and optoelectronics, including flexible and stretchable ones, due to its unique properties such as optical transparency, mechanical softness, ultrathin thickness, and high carrier mobility. Despite huge research efforts for graphene‐based electronic/optoelectronic devices, there are remaining challenges in terms of their seamless integration, such as the high‐quality contact formation, precise alignment of micrometer‐scale patterns, and control of interfacial‐adhesion/local‐resistance. Here, a thermally controlled transfer printing technique that allows multiple patterned‐graphene transfers at desired locations is presented. Using the thermal‐expansion mismatch between the viscoelastic sacrificial layer and the elastic stamp, a “heating and cooling” process precisely positions patterned graphene layers on various substrates, including graphene prepatterns, hydrophilic surfaces, and superhydrophobic surfaces, with high transfer yields. A detailed theoretical analysis of underlying physics/mechanics of this approach is also described. The proposed transfer printing successfully integrates graphene‐based stretchable sensors, actuators, light‐emitting diodes, and other electronics in one platform, paving the way toward transparent and wearable multifunctional electronic systems.