Narrative scenario development based on cross-impact analysis for the evaluation of global-warming mitigation options

Social, technological, economic and environmental issues should be considered comprehensively for the evaluation of global-warming mitigation options. Existing integrated assessment models include assessment of quantitative factors; however, these models do not explicitly consider interactions among qualitative factors in the background – for example, introductions of nuclear power stations interact with social acceptability. In this paper, we applied a technological forecasting method – the cross-impact method – which explicitly deals with the relationships among relevant factors, and we then developed narrative scenarios having consistency with qualitative social contexts. An example of developed scenarios in 2050, assuming the global population and the gross domestic product are the same as those of the A1 scenario of the IPCC Special Report on Emissions Scenarios, tells us that: (1) the Internet will be extensively used in all regions; (2) the global unified market will appear; (3) regional cultures will tend to converge; (4) long-term investments (of more than 30 years) will become difficult and therefore nuclear-power stations will not increase so remarkably; (5) the self-sufficient supply and diversification of primary energy sources will not progress so rapidly; and (6) due to the widespread use of the Internet, people will be more educated in global environmental issues and environmental costs will be more socially acceptable.     

PIV measurement and turbulence scale in turbulent combustion

We have investigated turbulent combustion by PIV (Particle Image Velocimetry) technique. Comparing with LDV data, the validity of PIV measurements has been confirmed. Particularly, the conditions of sampling number and spatial resolution have been shown to yield reliable data using PIV. Based on the velocity fields in cold flow and combustion, the interaction between flame and flow has been discussed. It was observed that the flow field is changed by combustion and the turbulence is reduced. In order to determine statistical quantities such as mean velocity and RMS of velocity fluctuation, a sampling number of 1000 is needed. Moreover, the velocity correlation coefficient was evaluated to obtain the integral length scale of the flow. For both cold flow and combustion, the PIV estimated scale is very close to that of LDV based on the assumption of Taylor's hypothesis. As a result, the spatial resolution in this study is about 6 times smaller than the integral length scale. © 2006 Wiley Periodicals, Inc. Heat Trans Asian Res, 35(7): 501–512, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20129     

Numerical simulation on supersonic flow in High-Velocity Oxy-Fuel thermal spray gun

This paper analyzes the behaviour of coating particles as well as the gas flow both inside and outside of the High-Velocity Oxy-Fuel (HVOF) thermal spray gun by using a quasi-one-dimensional analysis and a numerical simulation. The HVOF gun in the present analysis is an axially symmetric convergent-divergent nozzle with the design Mach number of 2.0. From the present analysis, the distributions of velocity and temperature of the coating particles flying inside and outside of the HVOF gun are predicted. The velocity and temperature of the coating particles at the exit of the gun calculated by the present method agree well with the previous experimental results. Therefore, the present method of calculation is considered to be useful for predicting the HVOF gas and particle flows.     

3D computation of hydrogen-fueled combustion around turbine blade-effect of arrangement of injector holes-

Recently,a number of environmental problems caused from fossil fuel combustion have been focused on.Inaddition,with the eventual depletion of fossil energy resources,hydrogen gas is expected to be an alternativeenergy resource in the near future.It is characterized by high energy per unit weight,high reaction rate,widerange of flammability and the low emission property.On the other hand,many researches have been underway inseveral countries to improve a propulsion system for an advanced aircraft.The system is required to have higherpower,lighter weight and lower emissions than existing ones.In such a future propulsion system,hydrogen gaswould be one of the promising fuels for realizing the requirements.Considering these backgrounds,our group hasproposed a new cycle concept for hydrogen-fueled aircraft propulsion system.In the present study,we perform 3dimensional computations of turbulent flow fields with hydrogen-fueled combustion around a turbine blade.Themain objective is to clarify the influence of arrangement of hydrogen injector holes.Changing the chordwise andspanwise spacings of the holes,the 3 dimensional nature of the flow and thermal fields is numerically studied.     

a-Si alloy three-stacked solar cells with high stabilized-efficiency

a-Si alloy three-stacked solar cells have been studied to improve the stabilized efficiency of a-Si: H based solar cells. Based on the analysis by the individual characterization method of the component cells in stacked type cells, the a-Si :H middle cell was replaced with an a-SiGe :H cell. Furthermore, the optical confinement technology was improved to obtain a high-output current with thin i-layer thickness in the a-SiGe :H bottom cell. By this device design, the initial conversion efficiency was improved up to 12.4% and more than a 10% stabilized efficiency was obtained in a-SiC :H/a-SiGe :H/a-SiGe :H three-stacked cells. These cell characteristics were confirmed by measurements at the JQA Organization (the former JMI Institute).     

Phase and amplitude comparison between experiment and calculation of ultrabroad-band pulses generated in a taper fiber

Using a cross-correlation frequency-resolved optical gating apparatus, the phases and amplitudes of ultrabroad-band optical pulses from a taper fiber have been measured for various input pulse peak powers. The measured waveforms have been compared with calculated waveforms using a finite-difference in the frequency domain method, in which no envelope approximations were used and the variation of the taper shape was taken into account. Excellent agreement between the measured and the calculated waveforms was obtained when the additional dispersion of a normal fiber and an objective was considered.     

Destruction of volatile organic compounds used in a semiconductorindustry by a capillary tube discharge reactor

Nonthermal plasma technologies offer an innovative approach to the problem of decomposing various volatile organic compounds (VOCs). The authors focused on DC capillary tube discharge plasma reactors to study the decomposition/destruction efficiency for toluene, EGM, trichloroethane and trichloroethylene at 50-2300 ppm levels in dry air. The effects of gas flow rate, VOC concentration and reactor operating conditions on decomposition and analysis of reactant conversion for each VOC were investigated. The results show that VOC destruction efficiency as high as 90% can be achieved, even under a short residence time (3.8 ms) with a destruction energy efficiency of up to 95 g (VOC)/kWh. Laboratory-scale plasma technology was successfully demonstrated for its potential application for VOC control in the semiconductor clean-room environment     

S/N and error rate performance in AlGaAs semiconductor laser preamplifier and linear repeater systems

The applications of AlGaAs semiconductor laser preamplifier and linear repeaters in single mode optical fiber transmission systems were studied through the baseband signal-to-noise ratio and bit error rate performance measurement. Experiments were carried out with the Fabry-Perot cavity laser amplifiers whose characteristics are improved by reducing the input mirror reflectivity to 6 percent. The use of a preamplifier improves the minimum detectable power by 7.4 dB over the Si-APD direct detection level when the received signal is amplified by 30 dB before photodetection. The use of two linear repeaters increases the regenerative repeater gain by 37 dB. These experimental results are in good agreement with theoretical predictions based on the photon statistic master equation analysis.     

S/N performance of an AlGaAs laser preamplifier and a linear repeater system

Baseband signal-to-noise-ratio characteristics in an AlGaAs laser preamplifier and a linear repeater system were studied theoretically and experimentally. The AlGaAs laser preamplifier improved the minimum detectable power by 1.6 dB over the level achieved by direct detection with an Si APD. 37 dB regenerative repeater gain was experimentally obtained in the system with two optical repeaters at 100 Mbit/s data rate.