Development of a transparent single-grid-type micro-strip gas chamber based on LCD technology

The liquid crystal display (LCD) technology allows several simple circuits to be built using thin film transistors, thus making fabrication of compact, integrated, large-area, and low-cost micro-pattern gaseous detectors possible. In this work, a single-grid-type micro-strip gas chamber (S-MSGC) using transparent electrodes based on the LCD technology was fabricated and successfully operated in several gas mixtures. The detector was coupled with a multi-pixel photon counter to detect an optical signal through the transparent substrate in Ar/CF₄ gas. Both electrical and optical signals were measured and the light yield of the detector was acquired. Successful operation of the S-MSGC can be considered the very important first step for development of the next target of integrated devices.     

Gene Expression over Time during Cell Transformation Due to Non-Genotoxic Carcinogen Treatment of Bhas 42 Cells

The Bhas 42 cell transformation assay (Bhas 42 CTA) is the first Organization for Economic Cooperation and Development (OECD)-certificated method used as a specific tool for the detection of the cell-transformation potential of tumor-promoting compounds, including non-genotoxic carcinogens (NGTxCs), as separate from genotoxic carcinogens. This assay offers the great advantage of enabling the phenotypic detection of oncotransformation. A key benefit of using the Bhas 42 CTA in the study of the cell-transformation mechanisms of tumor-promoting compounds, including non-genotoxic carcinogens, is that the cell-transformation potential of the chemical can be detected directly without treatment with a tumor-initiating compound since Bhas 42 cell line was established by transfecting the v-Ha-ras gene into a mouse fibroblast cloned cell line. Here, we analyzed the gene expression over time, using DNA microarrays, in Bhas 42 cells treated with the tumor-promoting compound 12-O-tetradecanoylphorbol-13-acetate (TPA), and NGTxC, with a total of three repeat experiments. This is the first paper to report on gene expression over time during the process of cell transformation with only a tumor-promoting compound. Pathways that were activated or inactivated during the process of cell transformation in the Bhas 42 cells treated with TPA were related not only directly to RAS but also to various pathways in the hallmarks of cancer.     

All solid-state battery with sulfur electrode and thio-LISICON electrolyte

A high-capacity type of all solid-state battery was developed using sulfur electrode and the thio-LISICON electrolyte. New nano-composite of sulfur and acetylene black (AB) with an average particle size of 1–10 nm was fabricated by gas-phase mixing and showed a reversible capacity of 900 mAh g⁻¹ at a current density of 0.013 mA cm⁻².     

Fabrication of octacalcium phosphate block through a dissolution-precipitation reaction using a calcium sulphate hemihydrate block as a precursor

Although octacalcium phosphate (OCP) powder and a collagen/gelatin composite demonstrate good potential as bone substitutes, an OCP block has not been fabricated to date. In this study, the feasibility of fabricating an OCP block was evaluated through a dissolution-precipitation reaction using a calcium sulfate hemihydrate (CSH) block as a precursor. When the block was immersed in a phosphate salt solution, its composition changed to that of OCP, while its structure was maintained. The diametral tensile strength (DTS) of the OCP block was 1.0?±?0.2?MPa. The macroporosity and microporosity of the OCP block were 33.4?±?4.5% and, 69.0?±?1.6%, respectively. New bone attached well to the OCP block, and this block was partially replaced by bone 2 weeks after implantation. Four weeks after implantation, the surface of the OCP block was nearly covered with new bone and ~30% of the block was replaced by new bone, while no replacement by bone was observed in the case of a hydroxyapatite (HAp) block used as a control. It is concluded that OCP blocks are potentially suitable for their use as artificial bone substitutes.     

Modeling of quantitative relationships between physicochemical properties of active pharmaceutical ingredients and tensile strength of tablets using a boosted tree

Objectives: The aim of this study was to explore the potential of boosted tree (BT) to develop a correlation model between active pharmaceutical ingredient (API) characteristics and a tensile strength (TS) of tablets as critical quality attributes.

Methods: First, we evaluated 81 kinds of API characteristics, such as particle size distribution, bulk density, tapped density, Hausner ratio, moisture content, elastic recovery, molecular weight, and partition coefficient. Next, we prepared tablets containing 50% API, 49% microcrystalline cellulose, and 1% magnesium stearate using direct compression at 6, 8, and 10?kN, and measured TS. Then, we applied BT to our dataset to develop a correlation model. Finally, the constructed BT model was validated using k-fold cross-validation.

Results: Results showed that the BT model achieved high-performance statistics, whereas multiple regression analysis resulted in poor estimations. Sensitivity analysis of the BT model revealed that diameter of powder particles at the 10th percentile of the cumulative percentage size distribution was the most crucial factor for TS. In addition, the influences of moisture content, partition coefficients, and modal diameter were appreciably meaningful factors.

Conclusions: This study demonstrates that BT model could provide comprehensive understanding of the latent structure underlying APIs and TS of tablets.     

Occurrence and sources of perfluorinated surfactants in rivers in Japan

We analyzed perfluorinated surfactants (PFSs) in 20 river samples and 5 wastewater secondary effluent samples in Japan to reveal their occurrence and sources. Nine PFS species were determined: perfluorooctanesulfonate (PFOS), perfluorooctane sulfonamide (FOSA), perfluoroheptanoate (PFHpA), perfluorooctanoate (PFOA), perfluorononanoate (PFNA), perfluorodecanoate (PFDA), perfluoroundecanoate (PFUA), perfluorododecanoate (PFDDA), and perfluorotridecanoate (PFTDA). PFSs were detected in all rivers, revealing nationwide contamination of rivers. In particular, 11 out of 20 river samples exceeded New Jersey guidance for PFOA in drinking water (40 ng/L). PFOS, PFHpA, PFOA, and PFNA were major species in Japan. Concentrations of PFOS, PFHpA, and PFNA in rivers were strongly correlated with population density, suggesting that the chemicals were derived from urban activities. PFOA showed a significant but weak correlation. We used crotamiton, a marker of sewage effluent, for further source analysis. Concentrations of PFOS, PFHpA, and PFNAwere strongly correlated with those of crotamiton, and plots of secondary effluents fell near the regression lines of rivers, indicating that the PFOS, PFHpA, and PFNA in rivers were derived from sewage effluent. On the other hand, PFOA was found at remarkably high levels (54-192 ng/L) in seven river samples containing low levels of crotamiton, suggesting that it was derived from nonsewage point sources, as well as sewage effluent. The total fluxes of sewage-derived PFOS, PFHpA, PFOA, and PFNA from Japan were estimated to be 3.6, 2.6, 5.6, and 2.6 t/year, respectively. This is the first report to identify PFOA in several rivers, derived from nonsewage point sources, by using a marker of sewage effluent.     

Moisture migration in idealized bilayer systems: relationships among water-associated properties, structure, and texture

The effects of composition and thermal treatment on the water sorption and diffusional properties of idealized protein gels arranged in bilayer configurations were determined; these water binding/migration properties were related to the mechanical characteristics of the gels. Samples were prepared from whey protein concentrate (WPC), they consisted of water:WPC ratios of 1.5 to 5.67, and were thermally set for 20–60 min. Moisture migration rates from samples interfaced with filters were determined, as were moisture sorption capacities of samples immersed in water. The physical properties of the gels were assessed by uniaxial compression and microscopy. Results showed that gel strength and consequent extent of protein interaction—as affected by thermal treatment—controlled the ability of the gel structure to absorb water. Sorption was exponentially correlated with gel modulus and linearly correlated with a function of protein content, heating time, and immersion time. Rates of diffusion from interfaced gels were dependent solely on water content. It was concluded that the degree of protein interaction, whether influenced by concentration or thermal treatment, affected network extensibility and thus the capacity of the gels to act as receptors of moisture. Results have implications for the functionality of shelf-stable sandwiches and other multicomponent foods.     

The role of prostate specific antigen in diagnosis of localized adenocarcinoma of the prostate. Nara Uro-Oncology Research Group

The number of cases of prostate carcinoma (PCA) is steadily inceasing in Japan. The clinical application of a reliable tumor marker, prostate specific antigen (PSA) for the diagnosis, as well as the increasing elderly population in Japan may account for this increase. The subjects were patients at the Nara Medical University and its affiliated hospitals; 1) 687 cases without PCA were evaluated for age-specific PSA and the incidence of abnormal PSA following urological manipulations, 2) 135 cases with histological proven BPH by transurethral resection of prostate (TUR-P) were examined for PSA density (PSAD) and positive PSA rate in BPH, 3) 135 cases receiving a needle biopsy with suspicion of PCA were examined for the efficacy of PSA and PSAD and other parameters, and 4) 459 PCA cases treated between 1988 and 1994, were examined for specific PSA and PSAD values by stage and degree of cell differentiation. The PSA assay used in this study was MARKIT-M PA (normal range < or = 3.6 ng/ml). The PSA was decreased gradually with age in non-PCA patients, and abnormal PSA was found in 5.5% of these patients following manipulations. The average PSA was 2.95 +/- 2.03 ng/ml in 130 BPH patients (mean age: 71.1 +/- 7.0 years old. and average prostate volume: 32.9 +/- 16.1 ml). And abnormal PSA level (more than 3.61 ng/ml) was found in 22.3%. The mean PSAD was 0.1.0 +/- 0.06, and PSAD was below 0.15 in 86.1% of these BPH cases. Among the 135 cases receiving a needle biopsy, 33 cases had PSA values between 3.61 and 10.0 ng/ml. Of these cases, PCA was found in 18.5% of the 27 cases with a PSAD below 1.5, and in 33.3% of the 6 cases with a PSAD over 1.5. PSA and PSAD were proportionally increased with stage, and a significant difference in the PSA value was observed between stage B1 and B2, and stage C and D (P < 0.05). However, PSA and PSAD values were not significantly correlated with the cell differentiation in PCA stage A2-C. In total, PSA was 18.1 ng/ml in well, 23.9 ng/ml in moderately and 35.9 ng/ml in poorly differentiated type PCA. The positive rate of PSA was 22.3, 65.4 and 83.5%, that of prostate acid phosphatase (PAP) was 10.0, 17.8 and 45.8%, and that of GSM was 25.0, 14.7 and 68.4%, in BPH, stage A PCA and stage BPCA, respectively. In conclusion, PSA is the most reliable tool in the diagnosis of localized PCA. However, the differential diagnosis of BPH and localized PCA is difficult when the PSA value is between 3.61 and 10.0 ng/ml, and accurate staging of localized PCA is difficult with PSA or PSAD alone. At present, it is necessary to use all possible tools for the early detection of localized PCA, and to perform the needle biopsy in all PCA-suspicious cases.