Optical properties of end-sealed hollow fibers

We propose sealing techniques for medical hollow fibers to protect the inner surface of fibers from debris or water that scatters from targets. First, hollow fibers are sealed with a film of polymer that is easily formed by use of a dipping technique. The transmission loss of 20-microm-thick sealing film was 0.2 dB for Er:YAG laser light, and the maximum energy that is available for the film was 180 mJ. Second, a sealed glass cap was applied to the output end of hollow fiber. The silica-glass cap with a wall thickness of 400 microm shows a transmission loss of 0.5 dB and was not damaged by radiation of 400-mJ energy pulses.     

Non-linear current–voltage characteristics related to native defects in SrTiO3 and ZnO bicrystals

SrTiO₃ and ZnO bicrystals with various types of boundaries were fabricated in order to examine their current–voltage characteristics across single grain boundaries. Their grain boundary structures were also investigated by high-resolution transmission electron microscopy. In Nb-doped SrTiO₃, electron transport behaviors depend on the type of boundaries. Random type boundaries exhibit highly non-linear current–voltage characteristics, while low angle boundaries show a slight non-linearity. On the contrary, undoped ZnO does not exhibit non-linear current–voltage characteristics in any type of boundaries including random ones. It is suggested that the differences observed in current–voltage properties between the two systems are mainly due to the difference in the accumulation behavior of acceptor-like native defects at grain boundaries. A clear non-linearity is obtained by means of Co-doping even for the highly coherent Σ1 boundary in a ZnO bicrystal. This is considered to result from the production of acceptor-like native defects by Co-doping.     

Temperature measurements of turbid aqueous solutions using near-infrared spectroscopy

We report a method that uses near-infrared spectroscopy and multivariate analysis to measure the temperature of turbid aqueous solutions. The measurement principle is based on the fact that the peak wavelength of the water absorption band, with its center near 1440 nm, shifts with changes in temperature. This principle was used to measure the temperatures of 1 mm thick samples of aqueous solutions containing Intralipid (2%), which are often used as optical phantoms for biological tissues due to similar scattering characteristics. Temperatures of pure water and aqueous solutions containing glucose (100 mg/ml and 200 mg/ml) were also measured for comparison. For the turbid Intralipid solutions, the absorbance spectrum varied irregularly with time due to the change in scattering characteristics. However, by making use of the difference between the absorbance at 1412 nm and the temperature-independent absorbance at 1440 nm, we obtained SEPs (standard error of prediction) of 0.3 degrees C and 0.2 degrees C by univariate linear regression and partial least squares regression, respectively. These accuracies were almost the same as those for the transparent samples (pure water and glucose solution).     

Detection of surface antigens on living cells through incorporation of immunorecognition into the distinct positioning of cells with positive and negative dielectrophoresis

Rapid determination of surface antigens on cells is possible by immobilization of cells accumulated by positive dielectrophoresis (p-DEP) via effective surface immunoreactions and removal of unbound cells by negative DEP (n-DEP). The DEP device for cell manipulation comprises a microfluidic channel with an upper indium tin oxide (ITO) electrode and a lower ITO microband array electrode (band electrode) modified with an antibody. Cells with the surface antigen introduced into the channel immediately accumulated on the surface of the band electrode during p-DEP generated by the application of ac voltage between the ITO electrode and the band electrode to immobilize by the specific antibody. The removal of accumulated cells to the gap region during n-DEP was used for rapid estimation of the residual cells with a specific surface antigen. We demonstrate here that human promyelocytic leukemia cells with the surface antigen CD33 can be captured on a band electrode modified with anti-CD33 antibody. The time required for the determination of the surface antigen using this compelled accumulation of cells by p-DEP and the separation of unbound cells by n-DEP is decreased to 60 s compared to that required by a cell binding assay using microtiter plates (30 min). Furthermore, the present method for a novel cell binding assay does not require pretreatment such as target labeling or washing of unbound cells and thereby enhancing throughput in the clinic and in cytobiology studies.     

Sensitive and spatially multiplexed detection system based on dielectrophoretic manipulation of DNA-encoded particles used as immunoreactions platform

In this work, we designed a new immunodevice that combines competitive immunoreactions on the microparticles, accumulation of these particles by negative dielectrophoresis (n-DEP), and their subsequent capture through hybridization among single-stranded DNAs (ssDNAs). Two widely used pesticides, atrazine and bromopropylate, were used as target molecules to test the resulting simultaneous detection system. For sensing, we prepared two different sets of microparticles: one modified with atrazine-conjugated bovine serum albumin (BSA-2d) and ssDNA-J1(up) and the other with bromopropylate-conjugated aminodextran (AD-155) and ssDNA-J2(up). The microparticles were incubated in a mixture of analyte-specific antibody and analyte at different concentrations to trap the unreacted antibodies prior to being labeled with antibodies conjugated with a fluorescence molecule. A suspension containing both types of microparticles was introduced into an n-DEP device consisting of an interdigitated microarray (IDA) electrode and channel modified with ssDNA-J1(down) and ssDNA-J2(down), which are complementary to ssDNA-J1(up) and ssDNA-J2(up), respectively. The n-DEP force generated by applying AC voltage to the IDA electrode displaced the microparticles toward the encoded areas, causing them to rapidly accumulate on the upper surfaces. Hybridization allowed us to distinguish the microparticles and sense multiple analytes by spatial recognition in the DNA-encoded areas. The fluorescence intensity of the captured particles, which depends on analyte concentrations, was measured selectively by focusing on specific areas. The strategy is advantageous for sensitivity due to the equivalent trapping efficiency by DNA hybridization and large surface area of the microparticle for immunoreactions. The rapidity and simplicity were still supported by particle manipulation. Using this concept, we detect atrazine and bromopropylate simultaneously with limits of detection (LODs) of 0.2 μg·L(-1), which covered the maximum residue level (MRL) in food samples established the European Union (EU) and Japan Ministry of Health, Labor and Welfare (MHLW).     

Estimation method for the light extraction efficiency of light-emitting elements with a rigorous grating diffraction theory

The light extraction efficiency of a light-emitting element with microstructured surface is analyzed with a rigorous grating diffraction theory. The grating theory reveals an improvement of extraction efficiency due to diffraction of light by the surface microstructure. The simulation results show that the improvement of extraction efficiency is due mainly to the reflected diffraction rather than to the transmitted diffraction. A part of total-internal-reflection light is diffracted into directions at less than the critical angle. Extraction efficiency is improved by multiple reflection and diffraction of light in a high-refractive-index layer. We propose a simple design method for an efficient surface microstructure from the viewpoint of reflected diffraction.     

Design and fabrication of a length-extensional mode rectangular X-cut quartz resonator with zero temperature coefficient.

Rectangular X-cut quartz crystal resonators with cut angles theta > 5.0 degrees and aspect ratios Rzy (= width 2z0/length 2y0) from 0.3 to 0.5 are investigated. The resonators oscillate mode is a length-extensional mode. A semiempirical frequency equation was derived from the stress expressed in terms of the trigonometric and the hyperbolic transcendental functions with constants estimated by the regression curve fit to the stress simulated by the finite-element method (FEM). Contours on which a point satisfies a zero first order temperature coefficient condition are shown in a cut angle theta and Rzy diagram. We proved that a fabricated resonator with Rzy = 0.400 and theta = 16.0 degrees, whose design parameter is located in the area of the contour, had a zero temperature coefficient.     

Ultimate strength of compressed stiffened plates and minimum stiffness ratio of their stiffeners

A theoretical investigation into the effectiveness of a stiffener against the ultimate strength of a stiffened plate is carried out. Series of the buckling analyses, the elastic large deflection analyses and the elastic-plastic large deflection analyses are performed by the analytical method and the finite element method on the stiffened plate under thrust. Experiments are also carried out on the stiffened plate under thrust to confirm the theoretical results.On buckling of a stiffened plate, it is well known that ther exxists a minimum stiffness ratio of a stiffener to the plate, $\text{λ}{}^{\mathrm{B}}{}_{\min }$, which gives the maximum limiting value of the buckling strength. Concerning the ultimate strength it was confirmed that there exists a significant stiffness ratio of a st stiffener to the plate, $\text{λ}{}^{\mathrm{U}}{}_{\min }$ similar to $\text{λ}{}^{\mathrm{B}}{}_{\min }$ for the buckling strength.It was also found that there are three typical collapse modes for the stiffened plate under thrust, that is: (1) MODE OO, overall collapse after overall buckling; (2) MODE LO, overall collapse after local buckling; (3) MODE LL, local collapse after local buckling.Approximatelmethods are proposed to evaluate the ultimate strength and $\text{λ}{}^{\mathrm{U}}{}_{\min }$ of a multi-stiffened plate under thrust.The effects of initial imperfections such as welding residual stresses and initial deflection on ultimate strength and $\text{λ}{}^{\mathrm{U}}{}_{\min }$ of a stiffened plate under thrust are also discussed.     

Packet-like space charges and conduction current in polyethylenecable insulation

Packet-like space-charge behavior in polyethylene for cable insulation was studied by utilizing the laser-induced pressure-pulse technique. Space charge observation under various conditions showed that the charge packet was formed in the specimen doped with antioxidant, especially when the specimen is oxidized. Periodic formation and transport of charge packets led to a small current oscillation. The charge packet seemed to be formed in the bulk, and the internal field of 1.2 to 1.4 MV/cm, in the region where the packet was formed was periodically enhanced from 2 to 2.5 MV/cm by space-charge accumulation. This suggests that the packet formation is caused by carrier generation under the highly enhanced field. The antioxidant deteriorated by oxidation was shown to be a possible origin of the carrier generation     

Electron microscopic observation on the parathyroid gland of the cardiomyopathic hamster (UM-X7.1 Syrian hamster).

The ultrastructure of the parathyroid gland (PTG) of the UM-X7.1 cardiomyopathic hamster (the UM-X7.1) was qualitatively and quantitatively compared with that of the normal hamster. In the UM-X7.1, the Golgi apparatus and rER were well developed compared with those of the control hamster. Morphometric analysis revealed that the mean values of the Golgi apparatus, rER and large vacuolar bodies were significantly greater in the UM-X7.1 than in the normal hamster and the mean value of lipid droplets was significantly less in the UM-X7.1 than in the normal hamster. Ultrastructurally, we consider that in the UM-X7.1, the synthesis and release of the parathyroid hormone may be activated by an excessive amount of circulating catecholamine, and the functional activity of the PTG may be higher than that in the normal hamster.