Uric acid photo-oxidation assay: in vitro comparison of sunscreening agents

We present a new method to evaluate the photo-oxidative activity of sunscreening agents based on the photodynamic oxidation of uric acid. Uric acid was selected as the oxidant probe for its high reactivity to singlet oxygen and oxygen radicals, high sensitivity of detection using electrochemical (EC) techniques, low light absorptivity and high photochemical stability in the UVA/B region of interest, and stability to autoxidation. The method is demonstrated by the photodynamic oxidation of uric acid on co-irradiation with Rose Bengal, a highly efficient photosensitizing dye for the production of singlet oxygen (1O2). Using this assay we found that the relative photodynamic oxidation rates of UVB-absorbing sunscreens in 80% methanol on irradiation with >290 nm light decreased in the order 2-ethylhexyl 4-dimethylaminobenzoate (DMABA-2EH) > 2-ethylhexyl 4-methoxycinnamate (MCA-2EH) and the experimental sunscreens, 1-(1,1-dimethylethyl)-3-octanoyl-4,4-dimethyl- 1,4,5,6,-tetrahydropyridine (ICI-319) and 1-(2-methylpropyl)-3-propionyl-4,4-dimethyl-1,4,5,6-tetrahydropyridine (ICI-855). The relative photodynamic oxidation rates of UVA-absorbing sunscreens decreased in the order 4-tert-butyl-4'-methoxydibenzoylmethane (BMDBM) and 4-(2-propyl)benzophenone (PB) > 2-hydroxy-4'-methoxy-benzophenone (HMB) and 2,2'-dihydroxy-4-methoxybenzophenone (DHMB). We have confirmed the photodynamic activity of DMABA-2EH for the production of singlet oxygen (1O2) using electron paramagnetic resonance (EPR) spectroscopy and the reagent 2,2,6,6-tetramethyl-4-piperidone (4-oxo-TEMP). We failed to detect the photodynamic production of the oxyradicals, superoxide (O2.-) and hydroxyl radical (HO.) using N-tert-butyl-a-phenylnitrone (PBN) and 5,5-dimethyl-1-pyrrolidine-1-oxide (DMPO) as a result of photochemical interference caused by these spin-trapping reagents. The uric acid photo-oxidation assay was also used to compare the photodynamic reactivity of light-reflective, microfine oxides TiO2, ZnO and ZrO2 suspended in aqueous 80% methanol. All of the microfine oxides (uncoated) showed greater photodynamic reactivity in equimolar dispersion than did any of the organic UVA- and UVB-absorbing sunscreens in homogeneous solution. In this assay the photodynamic oxidation rates for the microfine oxides decreased in the order ZnO > TiO2 (anatase) > ZrO2 > TiO2 (rutile).     

Antimicrobial activity of nutmeg against Escherichia coli O157

We examined the difference between Escherichia coli O157 and non-pathogenic E. coli in their tolerance to spices. Various spices (5 g each) were homogenized at 25 degrees C for 10 min with 5 ml of 70% ethyl alcohol, and the supernatant solutions obtained by centrifugation were used as spice extracts. When the E. coli strains were incubated with each spice extract at concentrations of 0.01% and 0.1%, a noteworthy difference was observed between the O157 and non-pathogenic strains in their tolerance to nutmeg. The populations of the non-pathogenic strains could not be reduced, but those of the O157 strains were remarkably reduced. Antibacterial activity by the nutmeg extract was also found against the enteropathogenic E. coli O111, but not against enterotoxigenic (O6 and O148) and enteroinvasive (O29 and O124) E. coli. When we examined the antibacterial effect of volatile oils in nutmeg on the O157 and non-pathogenic E. coli strains, all O157 strains tested were found to be more sensitive to beta-pinene than non-pathogenic E. coli strains.     

Severe ethanol stress induces assembly of stress granules in Saccharomyces cerevisiae

Stress granules (SGs) and processing bodies (P bodies) are cytoplasmic domains and play a role in the control of translation and mRNA turnover in mammalian cells subjected to environmental stress. Recent studies have revealed that SGs also form in the budding yeast Saccharomyces cerevisiae in response to glucose depletion and robust heat shock. However, information about the types of stress that cause budding yeast SGs is quite limited. Here we demonstrate that severe ethanol stress generates budding yeast SGs in a manner independent of the phosphorylation of eIF2α. The concentration that generated budding yeast SGs (>10%) was higher than that causing P bodies (>6%), and P bodies were assembled prior to SGs. As well as mammalian SGs, the assembly of budding yeast SGs under ethanol stress was blocked by cycloheximide. On the other hand, the budding yeast SGs caused by ethanol stress contained eIF3c but not eIF3a and eIF3b, although the eIF3 complex is a core constituent of mammalian SGs. Moreover, null mutants (pbp1Δ, pub1Δ and tif4632Δ) with a strong reduction in SG formation did not resume proliferation after the elimination of ethanol stress, indicating that the formation of budding yeast SGs might play a role in sufficient recovery from ethanol stress.     

Polymer electrolyte membrane with nanomatrix channel prepared by sulfonation of natural rubber grafted with polystyrene

High‐proton‐conductive polymer electrolyte with a nanomatrix channel was prepared by graft copolymerization of styrene onto deproteinized natural rubber followed by sulfonation with chlorosulfonic acid. First, natural rubber latex was purified with urea in the presence of surfactant to remove almost all proteins present in the rubber. Second, graft copolymerization of styrene onto deproteinized natural rubber was carried out with tert‐butyl hydroperoxide/tetraethylenepentamine as an initiator at 30°C in latex stage. The graft‐copolymerized natural rubber (DPNR‐graft‐PS) was sulfonated with chlorosulfonic acid in chloroform solution at an ambient temperature. The resulting sulfonated DPNR‐graft‐PS was characterized by FTIR spectroscopy, solid state ¹³C CP/MAS NMR spectroscopy, elemental analysis, and transmission electron microscopy. High proton conductivity of about 0.1 S/cm, less water uptake of 24 wt % and comparatively good stress at break of 9 MPa were accomplished at suitable contents of styrene units and sulfur, i.e., 32 wt % and 75 mol %, respectively. The high proton conductivity, excellent stability, and good mechanical properties were associated with not only the formation of the nanomatrix channel but also a specific concentration of sulfuric acid group. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Increasing the Upper Temperature Oxidation Limit of Alumina Forming Austenitic Stainless Steels in Air with Water Vapor

A family of alumina-forming austenitic (AFA) stainless steels is under development for use in aggressive oxidizing conditions from ~600?C900 °C. These alloys exhibit promising mechanical properties but oxidation resistance in air with water vapor environments is currently limited to ~800 °C due to a transition from external protective alumina scale formation to internal oxidation of aluminum with increasing temperature. The oxidation behavior of a series of AFA alloys was systematically studied as a function of Cr, Si, Al, C, and B additions in an effort to provide a basis to increase the upper-temperature oxidation limit. Oxidation exposures were conducted in air with 10% water vapor environments from 800?C1000 °C, with post oxidation characterization of the 900 °C exposed samples by electron probe microanalysis (EPMA), scanning and transmission electron microscopy, and photo-stimulated luminescence spectroscopy (PSLS). Increased levels of Al, C, and B additions were found to increase the upper-temperature oxidation limit in air with water vapor to between 950 and 1000 °C. These findings are discussed in terms of alloy microstructure and possible gettering of hydrogen from water vapor at second phase carbide and boride precipitates.     

Preparation of highly flexible chitin nanofiber-graft-poly(γ-l-glutamic acid) network film

In the previous study, we successfully prepared a chitin nanofiber film by regeneration from a chitin ion gel with an ionic liquid using methanol. In this study, we performed surface-initiated graft polymerization of γ-benzyl l-glutamate N-carboxyanhydride (BLG-NCA) from amino groups on a partially deacetylated chitin nanofiber (PDA-CNF) film. First, the chitin nanofiber film was immersed in 40 % NaOH aq. at 80 °C for 7 h for partial deacetylation. Then, the PDA-CNF film was immersed in a solution of BLG-NCA in ethyl acetate at 0 °C for 24 h for graft polymerization from amino groups on nanofibers to give a chitin nanofiber-graft-poly(γ-benzyl l-glutamate) (CNF-g-PBLG) film. The analytical results of the film indicated that graft polymerization of BLG-NCA occur on surface of nanofibers. Furthermore, the film was treated with 1.0 mol/L NaOH aq. to convert PBLG on nanofibers into poly(γ-l-glutamic acid sodium salt) (PLGA). Then, condensation of the resulting carboxylates with amino groups at the terminal ends of PLGAs or the remaining amino groups on nanofibers was performed using the condensing agent to produce a CNF-g-PLGA network film. The resulting film showed the good mechanical properties with high flexibility, which has potentials as promising materials for practical applications.     

Adhesion Properties of Acrylic Copolymers Modified with Si-Containing Copolymer

We made clear the cause of the increase in peel strength of pressure sensitive (PS) adhesives as a function of contact time, and investigated how to modify PS adhesives to maintain a low and constant peel strength for a long time. It was found that polar groups in the adhesive orient to the interface between the adhesive and the (stainless steel) metal substrate (SUS 304) so as to minimize interfacial free energy during adhesion, and the orientation increased affinity between the adhesive and the metal material and increased the peel strength as a result. The use of modifier which contained both P(MMA-co-SiMA) and PDMS showed an excellent modification effect, although modification with only PDMS or P(MMA-co-SiMA) was not sufficient. It was suggested that PDMS which migrated to the surface was extended uniformly over the surface by PDMS segments of P(MMA-co-SiMA) and that the enriched layer of PDMS on the adhesive surface worked as a barrier to prevent the orientation of polar groups in bulk. Therefore, low and constant peel strength could be achieved.     

Serial Changes of Serum Growth Factor Levels and Liver Regeneration after Partial Hepatectomy in Healthy Humans

This study aimed to investigate the associations of the serial changes of serum levels of various growth factors with liver regeneration after hepatectomy in healthy liver donors. Sixteen healthy liver donors who underwent conventional liver resection were included. Serum levels of various growth factors before hepatectomy and on postoperative day (POD) 1, 3, 5 and 7 were measured. Liver volume data calculated by multi-detector computed tomography using workstation. The ratio of remnant liver volume on POD 0 to liver volume before the operation was 51% ± 20%. The ratio of liver volume on POD 14 to liver volume on POD 0 were inversely correlated with remnant liver volume on POD 0 (r = −0.91). The ratio of liver volume on POD 14 to liver volume on POD 0 were significantly correlated with serum hepatocyte growth factor (HGF) levels on POD 1 (r = 0.54), serum leptin levels on POD 1 (r = 0.54), and serum macrophage colony-stimulating factor (M-CSF) levels on POD 5 (r = 0.76) and POD 7 (r = 0.80). These results suggest that early-phase elevation of serum levels of HGF, leptin and M-CSF may be associated with the acceleration of liver regeneration after hepatectomy in humans.     

Microstructure,Mechanical, and Scratch Resistance Properties of TiAlCrNbN-Graded Composite Coating Deposited on AISI H13 Steel Substrate with Pulsed DC Closed Field Unbalanced Magnetron Sputtering Method

Structure and adhesion properties of TiAlCrNbN coatings were investigated. These coatings were deposited onto AISI H13 steel substrate using pulsed dc closed field unbalanced magnetron sputtering at different deposition parameters including duty cycle, bias voltage, and working pressure. The coatings have been characterized by X-ray diffraction, scanning electron microscopy and energy dispersive spectroscopy. The TiAlCrNbN-graded composite coatings have a dense and columnar structure. The X-ray diffraction patterns of coatings exhibited predominantly c-TiAlCrN, h-NbN, and h-TiAlN reflections. Scratch resistance test showed that the highest adhesion strength was attained as 68 N at 2.5 μs duty time, 100 V bias voltages, and 3 × 10^?3 Torr deposition parameters. The lowest adhesion strength was obtained as 55 N at 0.5 μs duty time, 50V bias voltage, and 2 × 10^?3 Torr deposition parameters.     

Studies on Effective Utilization of SOFC Exhaust Heat Using Thermoelectric Power Generation Technology

Solid oxide fuel cells (SOFCs) are being researched around the world. In Japan, a compact SOFC system with rated alternative current (AC) power of 700 W has become available on the market, since the base load electricity demand for a standard home is said to be less than 700 W AC. To improve the generating efficiency of SOFC systems in the 700-W class, we focused on thermoelectric generation (TEG) technology, since there are a lot of temperature gradients in the system. Analysis based on simulations indicated the possibility of introducing thermoelectric generation at the air preheater, steam generator, and exhaust outlet. Among these options, incorporating a TEG heat exchanger comprising multiple CoSb₃/SiGe-based TEG modules into the air preheater had potential to produce additional output of 37.5 W and an improvement in generating efficiency from 46% to 48.5%. Furthermore, by introducing thermoelectric generation at the other two locations, an increase in maximum output of more than 50 W and generating efficiency of 50% can be anticipated.