高炉煤气喷水降温控制方法

用ＫＭＭ调节器根据温控偏差和喷水量计算两个调节参数，对水量调节阀进行开度调节来控制最终喷水量，从而达到准确有效控制布袋除尘器入口煤气温度的目的。     

Coincident indices of exons and introns

In this paper, the coincident index, proposed by W. F. Friedman in cryptology, is made use of in DNA sequence analysis and exon prediction. The coincident index of exons exceeds that of introns by many times, and is mainly affected by window length, which is correlated negatively with the coincident index. An optimal exon prediction scheme was obtained by experimental analysis with an orthogonal table. Besides exons, many other special sites such as tandem repeats can be identified by using the coincident index approach. The application of this approach to the ARV-2 (AIDS associated retrovirus 2) genome found three new possible coding regions and some unusual base composition regions which are probably related to definite biological functions.     

毫米波谐波振荡器的Volterra级数分析法

本文基于Ｖｏｌｔｅｒｒａ级数法和非线性转移函数理论，提出了一种分析毫米波谐波振荡器的新方法，给出了描述其非线性特性的决定方程，通过求解一组非线性代数方程，便可计算出谐波振荡器的振荡频率和幅度。文中给出了具体分析实例，并与谐波平衡法等进行了比较，结果表明：这种方法具有理论严密、准确性高、适用范围广等特点，特别是利用一次决定方程的结果作为其它非线性数值分析方法的初始估值，则可大大地节约计算时间，并容易     

大电流监测信号提取的光收发及信号处理

近年来,大电流的监测成了人们十分关心的问题,这是由于大电流有强磁、高压、电流大等一系列的直接监测所不能克服的问题。这就需要把高压大电流的强电信号,经过提取后变成能在实验室中直接观测的弱电信号。为此,如何从高压大电流的信号中提取出随实时信号变化而实时变化的小信号就变成了一个关键问题。详细介绍了监测信号提取的光收发电路原理和后续信号处理电路,分析了各部分的作用,给出了必要的分析结果。     

NdCl_3·nTBP/MgCl_2-AlR_3催化体系合成丁二烯橡胶

探讨了以NdCl_3的磷酸三丁酯(TBP)溶液为主催化剂、烷基铝为助催化剂、MgCl_2为载体组成的Ziegler-Natta型催化体系引发丁二烯(Bd)聚合的某些规律。用AlEt_3作助催化剂,聚合物的顺1,4-结构含量仅为57％,反1,4-结构含量为42％;而以Al(i-Bu)_3作助催化剂,聚合物的顺1,4-结构含量为88％,反1,4-结构含量为11％。各种陈化体系中,以NdCl_3·nTBP/MgCl_2-Al(i-Bu)_3-Ip三元体系的催化活性最高,当Nd/Bd(摩尔比)为7×10~(-5)时,单体转化率达80％。低温聚合可获得高顺式、高分子量聚合物。     

Monte Carlo simulation of grain growth and recrystallization in polycrystalline materials

The prediction and control of metal grain structures during processing have been major objectives of materials science. However, methodologies that are accurate and can be easily generalized to a variety of processing conditions have been difficult to formulate due to the complexity of the grain interactions. A novel Monte Carlo-based approach that explicitly incorporates these interactions has been developed to simulate the microstructural evolution driven by the minimization of grain boundary energy and lattice defect density. The applicability of this procedure has been demonstrated by the good correspondence between simulation results and experimental observations. This article reviews recent advances in the application of this technique to the investigation of a variety of phenomena, including normal and abnormal grain growth as well as static and dynamic recrystallization.     

无抗性选择标记的植酸酶基因转化DNA的构建

构建了无抗性选择标记植酸酶基因的转化片段DNAphyAⅡ。两侧设置了高等植物基因组DNA保守序列CAATbox，TATAbox和polyA的DNA片段（DNAphyAⅡ，5‘-CAATbox-TATAbox-CaMV35S-phyA Ⅱ-GUS-Nos-Tem-polyA-3‘)，为提高转化率奠定了分子基础，此外DNAphyAⅡ中植酸酶蛋白编码基因phyA Ⅱ前后的启动子和终止子序列，确保了phyA Ⅱ会得以正确表达。     

SIMATIC S5—115U可编程控制器

本文通过对SIMATIC S5—115U可编程控制器性能的简介,简述国外PC技术的现状和发展,并提出对PC国产化的看法.     

镁质瓷泥浆流变性能的改进

滑石质瓷是一种高性能瓷的材料，但由于其泥浆的稠化性及泥料塑性差，阻碍了滑石质瓷的大量生产。实验表明：引入长石作助熔剂并加入适量粘土，可以改进泥料塑性及泥浆流变性能，使烧成变形度小，机械强度提高，能较好地满足制品成型的工艺要求。实验中设计了多组配料，分析比较烧后试样的性能测试结果，确定最佳配方及烧结温度。