Organic–silicate hybrid catalysts based on various defined structures for Knoevenagel condensation

Two types of organic–inorganic hybrid base catalysts are prepared. Organic-functionalized molecular sieves (OFMSs), particularly “amine-immobilized porous silicates”, are designed based on common idea to immobilize catalytic active sites on silicate surface. Silicate–organic composite materials (SOCMs), such as “ordered porous silicate–quaternary ammonium composite materials”, are the precursors of ordered porous silicates obtained during the synthesis. Both the OFMS and the SOCM are used as the catalysts for Knoevenagel condensation. Among the OFMSs, there is clear tendency that the use of molecular sieve with larger pore volume and/or surface area gives the product in higher yield. Aminopropylsilyl (AP)-functionalized mesoporous silicates such as AP-MCM-41 gives the product in high yield under mild conditions. No loss of activity is observed after repeated use for three times. The SOCMs are also active for the same reaction. The precursors of the mesoporous silicates are more active than those of microporous silicates. This material can be repeatedly used without significant loss of activity. High activity is not due to the leached species. The active sites of the SOCM catalysts are considered to be SiO⁻ moieties located on the pore-mouth. Activity of the SOCM increases when the reaction is carried out without solvent, whereas decrease in activity of the OFMS is observed in the solvent-free system.     

Postfunctionalization of aromatic polyamine by [2+2] cycloaddition of 7,7,8,8-tetracyanoquinodimethane with side chain alkynes

Electron-rich, side chain alkynes of an aromatic polyamine were functionalized by a [2+2] cycloaddition, followed by retro-cyclization with the electron-accepting 7,7,8,8-tetracyanoquinodimethane (TCNQ). ¹H NMR studies were used to optimize the reaction conditions. Mild heating to >50?°C afforded the postfunctionalized aromatic polyamines with the desired acceptor amounts. The quantitative TCNQ addition was demonstrated by the MALDI-TOF mass spectrum and elemental analysis. Introduction of the cyano-based acceptor moieties into the polymer side chains resulted in unusually strong intermolecular interactions. In addition to the ?ШC?? interactions of the extended acceptor moieties, these intermolecular forces were supposed to improve the thermal stability of the aromatic polymers. Furthermore, the donor?Cacceptor chromophores formed by this postfunctionalization displayed low energy charge-transfer bands and redox activities in both the anodic and cathodic directions. The straightforward postfunctionalization technique using the alkyne?CTCNQ addition is useful for the preparation of narrow band gap polymers in one step.     

Dehydrogenative polycondensation of telechelically bis(dimethylsilyl)functionalized oligo(dimethylsiloxane)s or aromatics and 1,3,3,5,5,7,7,7-octamethyltetrasiloxane

Telechelically bis(hydrodimethylsilyl)-functionalized oligo(dimethylsiloxane)s or aromatics were found to give polymers constituting of alternating disilylene and oligodimethylsiloxane or 4,4′-diylaromatics as repeating units by dehydrogenative coupling reaction in the presence of palladium dibenzylideneacetone complex. The same catalyst gave polysilylenes with trisiloxane pendant from 1,1-dihydro-1,3,3,5,5,7,7,7-octamethyltetrasiloxane. Received: 18 October 1996/Accepted: 31 October 1996     

Heterodimerization of Group I Ribozymes Enabling Exon Recombination through Pairs of Cooperative trans‐Splicing Reactions

Group I (GI) self‐splicing ribozymes are attractive tools for biotechnology and synthetic biology. Several trans‐splicing and related reactions based on GI ribozymes have been developed for the purpose of recombining their target mRNA sequences. By combining trans‐splicing systems with rational modular engineering of GI ribozymes it was possible to achieve more complex editing of target RNA sequences. In this study we have developed a cooperative trans‐splicing system through rational modular engineering with use of dimeric GI ribozymes derived from the Tetrahymena group I intron ribozyme. The resulting pairs of ribozymes exhibited catalytic activity depending on their selective dimerization. Rational modular redesign as performed in this study would facilitate the development of sophisticated regulation of double or multiple trans‐splicing reactions in a cooperative manner.     

Ursodeoxycholic Acid Suppresses Lipogenesis in Mouse Liver: Possible Role of the Decrease in β-Muricholic Acid,a Farnesoid X Receptor Antagonist

The farnesoid X receptor (FXR) is a major nuclear receptor of bile acids; its activation suppresses sterol regulatory element-binding protein 1c (SREBP1c)-mediated lipogenesis and decreases the lipid contents in the liver. There are many reports showing that the administration of ursodeoxycholic acid (UDCA) suppresses lipogenesis and reduces the lipid contents in the liver of experimental animals. Since UDCA is not recognized as an FXR agonist, these effects of UDCA cannot be readily explained by its direct activation of FXR. We observed that the dietary administration of UDCA in mice decreased the expression levels of SREBP1c and its target lipogenic genes. Alpha- and β-muricholic acids (MCA) and cholic acid (CA) were the major bile acids in the mouse liver but their contents decreased upon UDCA administration. The hepatic contents of chenodeoxycholic acid and deoxycholic acid (DCA) were relatively low but were not changed by UDCA. UDCA did not show FXR agonistic or antagonistic potency in in vitro FXR transactivation assay. Taking these together, we deduced that the above-mentioned change in hepatic bile acid composition induced upon UDCA administration might cause the relative increase in the FXR activity in the liver, mainly by the reduction in the content of β-MCA, a farnesoid X receptor antagonist, which suggests a mechanism by which UDCA suppresses lipogenesis and decreases the lipid contents in the mouse liver.     

An enzyme catalyzing O-prenylation of the glucose moiety of fusicoccin A, a diterpene glucoside produced by the fungus Phomopsis amygdali

Isoprenoids form the largest family of compounds found in nature. Isoprenoids are often attached to other moieties such as aromatic compounds, indoles/tryptophan, and flavonoids. These reactions are catalyzed by three phylogenetically distinct prenyltransferases: soluble aromatic prenyltransferases identified mainly in actinobacteria, soluble indole prenyltransferases mostly in fungi, and membrane‐bound prenyltransferases in various organisms. Fusicoccin A (FC A) is a diterpene glycoside produced by the plant‐pathogenic fungus Phomopsis amygdali and has a unique O‐prenylated glucose moiety. In this study, we identified for the first time, from a genome database of P. amygdali, a gene (papt) encoding a prenyltransferase that reversibly transfers dimethylallyl diphosphate (DMAPP) to the 6′‐hydroxy group of the glucose moiety of FC A to yield an O‐prenylated sugar. An in vitro assay with a recombinant enzyme was also developed. Detailed analyses with recombinant PAPT showed that the enzyme is likely to be a monomer and requires no divalent cations. The optimum pH and temperature were 8.0 and 50 °C, respectively. K_m values were calculated as 0.49±0.037 μM for FC P (a plausible intermediate of FC A biosynthesis) and 8.3±0.63 μM for DMAPP, with a k_cat of 55.3±3.3×10^?3 s. The enzyme did not act on representative substrates of the above‐mentioned three types of prenyltransferase, but showed a weak transfer activity of geranyl diphosphate to FC P.     

Transmission electron microscope observation of organic–inorganic hybrid thin active layers of light-emitting diodes

Low-resistivity indium tin oxide [ITO] film was successfully deposited on oxygen plasma-treated polyethylene terephthalate [PET] surfaces at room temperature. X-ray diffraction [XRD] measurements demonstrated that the film deposited on the PET surface that had not been treated with oxygen plasma had an amorphous structure. In contrast, after the low-power oxygen plasma treatment of the PET surface, the ITO film deposited on the PET surface had a poly-crystalline structure due to interactions between electric dipoles on the PET surface and electric dipoles in the ITO film. The minimum resistivity of the poly-crystalline ITO was about 3.6 times lower than that of the amorphous ITO film. In addition, we found that the resistivity of ITO film is proportional to the intensity of the (400) line in the film's XRD spectra.     

Spherulitic formation and characterization of partially fluorinated copolymers and their nanohybrids with functional fillers

Poly[vinylidenefluoride‐co‐(tetrafluoroethylene)] (P(VDF‐TeFE)) exhibited clear spherulitic texture with negative birefringence. The number and growth rates of the spherulites decreased at high crystallization temperature than at low crystallization temperature. Nonetheless, overall larger spherulites were found at high crystallization temperature and the brightness of the spherulites increased very fast at low crystallization temperature, thereafter it seemed as diminution of birefringence. AFM was used to investigate the impact of organo modified nanodiamond(ND) on spherulitic textures, lamellar thickness, and thickness distribution of P(VDF‐TeFE) copolymer. Poly[ethylene‐co‐(tetrafluoroethylene)] (ETFE) also confirmed spherulites structure and the boundaries could be clearly observed. By incorporation of the organo modified nanodiamond (ND) and organo‐modified montmorillonite (MMT) in fluropolymer matrix, it was found that spherulitic texture was seriously disordered and their nanohybrids was found only to have poorly developed spherulite structure. Both of the nanohybrids samples show better crystallization temperature as compared to their neat copolymer samples. Furthermore, the incorporation of nanoparticles decreased the size of the spherulites. POLYM. ENG. SCI., 57:161–171, 2017. © 2016 Society of Plastics Engineers     

Measurement of self-diffusion coefficients in Li ionic conductors by using the short-lived radiotracer of 8Li

For the effective use of short-lived radioactive beams, soon to be available at the Tokai Radioactive Ion Accelerator Complex, the authors have developed a radiotracer method for diffusion studies in solids. The experimental test was performed by the measurement of the diffusion coefficients of Li in a sample of the compound βLiAl using an α-emitting radiotracer of ⁸Li (T_1/2=0.84 s). It was found that the time-dependent yields of the α particles from the diffusing ⁸Li that was initially implanted in the sample could be used as a measure of the diffusivity of the tracer in a nondestructive way. The method was applied to measure the self-diffusion coefficients of Li in βLiGa, and for investigating how the Li diffusion in the Li ionic conductors is affected by the concentration of atomic defects (i.e., the existence of the atomic vacancies of Li and the defects in Ga sites that are replaced by Li).     

The study on change of mechanical properties of NBR due to deterioration

Rubber is an important industrial material. However, mechanical properties and deformation of the high polymer including rubber are not clear. A method of estimating the mechanical properties which can be used for the deteriorated rubber is demanded to improve the reliability of it. Improved VBO (Viscoplasticity theory based on overstress) model is a constitutive equation. We applied it for the compression stress-strain behavior of deteriorated NBR (acryloNitrile-Butadiene rubber). Furthermore, we proposed a method of estimating the mechanical properties of deteriorated NBR. In this paper, deterioration tests in water and in air were conducted. To confirm the validity of the proposed improved VBO model and estimated mechanical properties, simulations of the stress-strain curves obtained in the tests were conducted.