Preparation of mesoporous silica replica using ordered mesoporous carbon by vapor phase transport of silica source

A new vapor phase transport (VPT) technique to prepare an inverse silica replica of an ordered mesoporous carbon was developed. Tetraethyl orthosilicate (TEOS) was infiltrated in mesoporous carbon CMK-3 as the hard template at 180 °C for 48 h under an autogenous pressure in an autoclave in the presence of water. The samples obtained by removal of CMK-3 retained structural regularity of CMK-3 with little shrinkage of framework, which were characterized by SAXRD, N₂ adsorption, TG-DTA, and SEM. Influence of preparation temperature on the loading amount of silica was investigated. The multi-step replication process was monitored by characterizing the replicated materials as well as intermediate composites.     

Molded micro- and mesoporous carbon/silica composite from rice husk and beet sugar

A molded carbon/silica composite with high micro- and mesoporosity, as well as a high bulk density, was fabricated by activating a disk-molded precursor made from carbonized rice husk (RH) and beet sugar (BS) at 875 °C in CO₂. The pore structure of the RH- and BS-based carbon/silica composite (RBC) was analysed in relation to the bulk density. An activation time of 2.0 h provided the largest BET specific surface area (1027 m²/g) and total pore volume (0.68 cm³/g) and a low bulk density (0.54 g/cm³). An RBC that was first activated for 1 h was immersed again in BS syrup and then activated in CO₂ for 1 h. This two-step activation process provided both a high bulk density (0.69 g/cm³) and a highly textured structure (BET specific surface area, 943 m²/g; total pore volume, 0.56 cm³/g). The immersion in BS syrup was useful for improving the texture without reducing the bulk density, in comparison to one-step activation for 1.0 h. The suspension of the RBCs was basic because of the residual inorganic compounds of potassium and calcium. However, the basicity of the suspension was alleviated by washing the RBCs with water.     

Disorders and oxygen vacancies in p-type Sn2B2O7 (B = Nb,Ta): Role of the B-site element

Sn₂Nb_2−xTa_xO₇ (x = 0.0–2.0) with pyrochlore structure is a promising material for p-type oxide semiconductors. A systematic study of its Nb/Ta ratio indicated that the hole–generation efficiency of the Nb end (Sn₂Nb₂O₇) was an order of magnitude lower than that of the Ta end (Sn₂Ta₂O₇). Although this occurs due to differences in oxygen-vacancy formation, the origins of the hole–generation efficiencies remain unclear due to limited information on local and global crystal-structure disorders in pyrochlore Sn₂Nb₂O₇ and Sn₂Ta₂O₇. In this study, the crystal structures of Sn₂B₂O₇ (B = Nb, Ta), composed of BO₆ octahedra and Sn₄O tetrahedra, were investigated using X-ray absorption spectroscopy and X-ray diffraction. A detailed investigation of the local and global crystal structures indicated a larger amount of disorder in the Sn₄O tetrahedra in Sn₂Nb₂O₇ compared to Sn₂Ta₂O₇; disorder in the BO₆ octahedra occurred only in Sn₂Ta₂O₇. This study indicates that an appropriate selection of the B-site element is vital for suppressing defect and disorder formation in Sn₄O tetrahedra and subsequently improving the hole–carrier–generation efficiency.     

Improvement of the surface quality of foam injection molded products from a material property perspective

Microcellular injection molding is an attractive method. However, their surface imperfections have been a major problem hindering wide industrial applications. Several methods have been proposed to improve the surface appearance of foams. In this study, we proposed a method to improve the surface appearance of polypropylene (PP) foams from the material property perspective, especially with regard to crystallization and viscosity. The basic idea of the surface improvement is to reduce the size of bubbles generated at the flow front, delay the solidification behavior of the polymer at the mold interface, squeeze the bubbles existing at the mold–polymer interface, and redissolve the bubbles into the polymer by holding pressure. Blending a low-modulus PP delays the crystallization of the polymers at the skin layer and solidification, taking enough time to squeeze the bubbles smaller. A sorbitol-based gelling agent, bis-O-([4 methylphenyl]methylene)-D-Glucitol, was used to increase the viscosity at a low strain rate to reduce the size of the bubbles generated at the flow front during the filling stage. The foam injection molding experiments demonstrated that the proposed method effectively improved the surface appearance of the foams. In particular, the surface appearance of the foams became almost equivalent to that of solid samples using low-modulus PP.     

Numerical Analysis of the Boundary Scattering Effect on Transport Properties in Bi-Sb Nanowires

In this study, we have numerically analyzed the transport properties of Bi-Sb nanowires, taking into account wire boundary scattering. Wire boundary scattering slightly decreased the Seebeck coefficient of Bi-Sb nanowires. This effect is due to the observation that boundary scattering and the mobility ratio of L-point electrons to T-point holes in the nanowires are smaller than those in bulk Bi-Sb because the wire boundary scattering suppresses the mobilities of L-point electrons and heavy holes. The largest Seebeck coefficient for all wire diameters was obtained when the Sb concentration was 5 at.%. The effective mass approached zero near 5 at.% Sb, and the small effective mass led to a large subband shift in each band. Thus, a small effective mass enhances the quantum effect at a fixed wire diameter, even if wire boundary scattering is taken into account.     

RAST: finding related documents based on triplet similarity

With the increasing amount of information available in recent years, searching for the desired content is becoming a challenging task. In this work, a tool for searching abstracts submitted to scientific conferences is introduced. It not only searches abstracts by the given keyword(s) but also displays abstracts related to a single or multiple selection. It also displays highly relevant abstracts together with possible keywords to help users refine their search. Analysis of the conditional similarity algorithm proposed here has shown that it does provide better output compared to ordinary cosine similarity, as well as the list of possible keywords reflects results of latent topic analysis. An interface for storing and sorting selected abstracts for future review and/or printing is also provided.     

Application of a thin intermediate cathode layer prepared by inkjet printing for SOFCs

The application of an inkjet printing process for fabricating solid oxide fuel cell (SOFC) cathodes was investigated. Stably-dispersed LSCF–GDC inks were prepared by ball milling, and the composition was easily controlled by the preparation process. Fabrication of an LSCF–GDC layer was successfully carried out by depositing dots and the thickness was easily controlled by repeating printing process. A planar SOFC single cell with a double-layered cathode (comprised of a paste painted cathode layer and an inkjet printed interlayer) achieved a maximum power density of 0.71 W/cm² at 600 °C. This is the preliminary work for fabricating the cathode layer of a SOFC single cell via inkjet printing.     

Persistence and partitioning of eight selected pharmaceuticals in the aquatic environment: Laboratory photolysis, biodegradation, and sorption experiments

We selected eight pharmaceuticals with relatively high potential ecological risk and high consumption—namely, acetaminophen, atenolol, carbamazepine, ibuprofen, ifenprodil, indomethacin, mefenamic acid, and propranolol—and conducted laboratory experiments to examine the persistence and partitioning of these compounds in the aquatic environment. In the results of batch sunlight photolysis experiments, three out of eight pharmaceuticals—propranolol, indomethacin, and ifenprodil—were relatively easily photodegraded (i.e., half-life < 24 h), whereas the other five pharmaceuticals were relatively stable against sunlight. The results of batch biodegradation experiments using river water suggested relatively slow biodegradation (i.e., half-life > 24 h) for all eight pharmaceuticals, but the rate constant was dependent on sampling site and time. Batch sorption experiments were also conducted to determine the sorption coefficients to river sediments and a model soil sample. The determined coefficients (K_d values) were much higher for three amines (atenolol, ifenprodil, and propranolol) than for neutral compounds or carboxylic acids; the K_d values of the amines were comparable to those of a four-ring polycyclic aromatic hydrocarbon (PAH) pyrene. The coefficients were also higher for sediment/soil with higher organic content, and the organic carbon-based sorption coefficient (log K_oc) showed a poor linear correlation with the octanol-water distribution coefficient (log D_ow) at neutral pH. These results suggest other sorption mechanisms—such as electrochemical affinity, in addition to hydrophobic interaction—play an important role in sorption to sediment/soil at neutral pH.     

Novel iridium complex and its copolymer with N-vinyl carbazole for electroluminescent devices

A novel iridium complex having the polymerizable functional group as one of the ligands, bis(2-phenylene pyridine) acrylate iridium lr(ppy)2Ac was synthesized as a phosphorescent dopant for electroluminescent (EL) devices. It has a photoluminescence spectrum peak at about 530 nm. EL devices were fabricated by doping lr(ppy)2Ac into host materials, such as BCP (2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline) and poly(N-vinyl carbazole) (PVCz). Bright blue-green luminescence of about 12 000 cd/m2 was observed for an EL device having a structure of indium-tin oxide JTO)/1r(ppy)2Ac-doped TPD:PVCz/BCP/Alq3 [tris(8-hdroxyquinoline) aluniinuml/Mg:Ag. Furthermore, the iridium complex was copolymerized with N-vinyl carbazole (VCz) to form a random copolymer with a number average molecular weight of about 1000. An EL device using this hole-transport layer gave bright blue-green emission of more than 6000 cd/m2. These results indicate that lr(ppy)2Ae, especially its copolymer with VCz, can be a promising phosphorescent material for organic EL devices.