Decomposition of Carbon Dioxide to Carbon with Active Wustite at 300°C

Active wustite (FeδO, with a δ value of 0.98) was prepared by keeping normal wustite (δ value of 0.94) in a N₂ atmosphere at 300°C for 10 min. This reaction is given by (4δ₂–3)Fe_δ1O→(4δ₁–3)Fe_δ2O + (δ₂–δ₁)Fe₃O₄ where δ₁= 0.94 and δ₂= 0.98. The equation indicates that the normal wustite undergoes eutectoid decomposition into active wustite and stoichiometric magnetite (Fe₃O₄). Carbon dioxide (1.013 × 10⁵ Pa) was almost completely (100%) decomposed into carbon (zero valence) by the active wustite at the low temperature of 300°C, which was associated with the transformation of the active wustite into the stoichiometric magnetite. The internal pressure of the reaction cell eventually became a vacuum.     

Measurement of self-diffusion coefficients in Li ionic conductors by using the short-lived radiotracer of 8Li

For the effective use of short-lived radioactive beams, soon to be available at the Tokai Radioactive Ion Accelerator Complex, the authors have developed a radiotracer method for diffusion studies in solids. The experimental test was performed by the measurement of the diffusion coefficients of Li in a sample of the compound βLiAl using an α-emitting radiotracer of ⁸Li (T_1/2=0.84 s). It was found that the time-dependent yields of the α particles from the diffusing ⁸Li that was initially implanted in the sample could be used as a measure of the diffusivity of the tracer in a nondestructive way. The method was applied to measure the self-diffusion coefficients of Li in βLiGa, and for investigating how the Li diffusion in the Li ionic conductors is affected by the concentration of atomic defects (i.e., the existence of the atomic vacancies of Li and the defects in Ga sites that are replaced by Li).     

Cost-Efficient Traffic Aggregation Employing Cross-Layer Shared Protection

Shared protection/restoration is a promising solution for reducing protection resources and is supported at each layer of the current multi-layer networks. Software-defined networking is expected to reduce equipment cost as well as operational cost by orchestrating these shared protection functionalities. However, although protection resource sharing improves link utilization, it sometimes increases the required equipment. Meanwhile, traffic re-aggregation at each layer is an important technique for low volume traffic to utilize the underlying link capacity more efficiently, but re-aggregation also makes it difficult to share protection resources with traffic at lower layers. In this paper, we present multi-layer network design strategy and method that reduce equipment cost by means of both traffic re-aggregation at each layer and protection resource sharing among multiple service traffic at different layers. The strategy first prioritizes traffic re-aggregation at each layer, and then maximally delegates shared protection to lower layers as long as it does not increase the required capacity at the lower layer. Evaluation results from the example three-layer networks confirm that the proposed method can effectively reduce equipment cost compared to the conventional design method. Cost reduction is achieved by leveraging shared protection functions at multiple layers.     

High‐pixel‐rate grating‐light‐valve laser projector

Abstract— A high‐pixel‐rate, high‐contrast (30,000:1) wide‐color‐gamut grating‐light‐valve laser projector is reported. A new optical engine enabling high‐frame‐rate (240 Hz) scan projection is employed. Panoramic wide‐angle‐scan projection with a 64:9 aspect ratio was also developed. Speckle noise is eliminated using a simple but highly efficient technique. The optical throughput efficiency of the grating‐light‐valve laser projector is reviewed.     

Motion analysis of a tripod parallel mechanism

A tripod parallel mechanism consists of three links of fixed length and a rigid platform, and these are connected by revolute joints. The platform can achieve sixdegrees-of-freedom (6-DOF) motion by the coordinated movement of the bottom ends of the three links on a horizontal plane. This mechanism has advantages over the more common six extendible parallel manipulators. It has a much larger work space and a simple structure. In this article, we show that the vector analysis for this tripod parallel mechanism and the derivation of the positions of the three bottom ends of the links in an arbitrary attitude of platform can be found by inverse kinematics and the conditions of geometrical constraint. Then, by a numerical simulation, the trajectories of the bottom ends of the three links are shown.     

Development of an epileptic seizure prediction algorithm using R–R intervals with self-attentive autoencoder

Epilepsy is a neurological disorder that may affect the autonomic nervous system (ANS) from 15 to 20 min before seizure onset, and disturbances of ANS affect R–R intervals (RRI) on an electrocardiogram (ECG). This study aims to develop a machine learning algorithm for predicting focal epileptic seizures by monitoring R–R interval (RRI) data in real time. The developed algorithm adopts a self-attentive autoencoder (SA-AE), which is a neural network for time-series data. The results of applying the developed seizure prediction algorithm to clinical data demonstrated that it functioned well in most patients; however, false positives (FPs) occurred in specific participants. In a future work, we will investigate the causes of FPs and optimize the developing seizure prediction algorithm to further improve performance using newly added clinical data.

     

Effects of heated seat and foot heater on thermal comfort and heater energy consumption in vehicle

Subjective experiments involving 12 different conditions were conducted to investigate the effects of heated seats and foot heaters in vehicles on thermal sensation and thermal comfort. The experimental conditions involved various combinations of the operative temperature in the test room (10 or 20°C), a heated seat (on/off) and a foot heater (room operative temperature?+10 or?+20°C). The heated seat and foot heater improved the occupant's thermal sensation and comfort in cool environments. The room operative temperature at which the occupants felt a 'neutral' overall thermal sensation was decreased by about 3°C by using the heated seat or foot heater and by about 6°C when both devices were used. Moreover, the effects of these devices on vehicle heater energy consumption were investigated using simulations. As a result, it was revealed that heated seats and foot heaters can reduce the total heater energy consumption of vehicles. Statement of Relevance: Subjective experiments were conducted to investigate the effects of heated seats and foot heaters in vehicles on thermal comfort. The heated seat and foot heater improved the occupant's thermal sensation and comfort in cool environments. These devices can reduce the total heater energy consumption in vehicles.     

Object detection based on a robust and accurate statistical multi-point-pair model

In this paper, we propose a robust and accurate background model, called grayscale arranging pairs (GAP). The model is based on the statistical reach feature (SRF), which is defined as a set of statistical pair-wise features. Using the GAP model, moving objects are successfully detected under a variety of complex environmental conditions. The main concept of the proposed method is the use of multiple point pairs that exhibit a stable statistical intensity relationship as a background model. The intensity difference between pixels of the pair is much more stable than the intensity of a single pixel, especially in varying environments. Our proposed method focuses more on the history of global spatial correlations between pixels than on the history of any given pixel or local spatial correlations. Furthermore, we clarify how to reduce the GAP modeling time and present experimental results comparing GAP with existing object detection methods, demonstrating that superior object detection with higher precision and recall rates is achieved by GAP.     

Detection algorithm for color dynamic images by multiple surveillance cameras under low luminance conditions based on fuzzy corresponding map

An objects detection algorithm for color dynamic images from two cameras is proposed for a surveillance system under low illumination. It provides automatic calculation of a fuzzy corresponding map and color similarity for lower luminance conditions, which detects little chromatic regions in CCD camera images under lower illumination and presents regions with a possibility of occlusion situation. Experimental detection results for two dynamic images from real surveillance cameras in a downtown area in Japan under low luminance conditions show that the proposed algorithm has 15% improved accuracy compared with the independent detection algorithm in the same false alarm rate, which occlusion regions are correctly presented. Moreover, implementability for severe surveillance situation is discussed. The proposed algorithm is being considered for use in a low cost surveillance system at a relatively poor security downtown (shopping mall) area in Japan.     

Response analysis for identifying the origin of photo-modulated current contrasts in scanning tunneling microscopic imaging semiconductor surfaces

Inhomogeneities in semiconductor solids can be imaged by two-dimensional mapping of the amplitude of periodically modulated tip current in scanning tunneling microscopy that is induced by illumination of semiconductor samples with a chopped light. It has been shown that it is possible to distinguish between plural origins of the photo-modulated current by analyzing the response properties of the current signal. A judicial choice of the modulation frequency is important for the required contrasts to be obtained.