煤矿矿井水检测质量控制措施探讨

探讨了影响煤矿矿井水检测质量的主要因素,按照全过程、全要素控制的理念提出了检测前、检测中和检测后的控制措施。     

Adaptive control of diamond drilling of nonmetallic materials

The basic principles for selecting the work regimes for diamond drilling of nonmetallic materials are presented. The process of microcutting by a single diamond grain is examined, and relations between the components of the cutting force and the ratio of the rate of the main motion to the feed rate are obtained on the basis of known relationships. It is shown that adaptive control of the drilling nonmetallic materials is possible using two-circuit systems — one for feed-rate control and one for cutting-rate. __________ Translated from Steklo i Keramika, No. 3, pp. 28–30, March, 2007.     

Thermodynamic time and microstress tensor in Vakulenko's form

The significance of the concepts of thermodynamic time and microstress tensor introduced by A. A. Vakulenko for development of the theory of viscoplasticity is analyzed.Translated from Problemy Prochnosti, No. 5, pp. 56–58, May, 1991.     

Optimal representation of cycles in arithmetic graphs

The paper considers representation of Hamiltonian circuits by natural arithmetic graphs.Translated from Kibernetika, No. 1, pp. 17–20, January–February, 1991.     

由呼出气中的氡浓度估计铀矿工体内~(225)Ra的负荷量

本文测量了某铀矿不同工种的56名矿工下矿井作业前的呼出气中的~(222)Rn浓度,并由此估算了他们体内的~(226)Ra 负荷量。按不同工种的人数加权,呼出气中的~(222)Rn 浓度平均值为34.1Bqm~(-3),体内~(226)Ra 负荷量的均值为1.95kBq。同时还对9名休息了2天的和2名离开井下作业3—4年的矿工以及12名来下过矿井的本矿工人呼出气中氡浓度进行了测量,由此估算出其体内~(226)Ra 负荷量的均值分别为1.11、0.94和0.17kBq。     

石油系油浆与煤系闪蒸油的焦化性能——I．热解条件的影响

通过偏光显微镜观察了石油系油浆（LH）与煤系闪蒸油（SN）焦化后所得焦块的光学结构。结果表明，在较宽条件下两种原料单独焦化均得不到取向度高的流线型结构。将两种原料以一定比例混合后先热解丙焦化所得焦块的光学结构明显好于二者混合后直接焦化所得焦块的光学结构，其中LH和SN以3：2的重量比混合后在440℃、1MPa下热解3．5h然后再在530℃、1MPa下焦化8h所得焦块为具有较高取向度的流线型结构，适合于作为针状焦的起始原料。     

α厚层测量法的定标方法探讨

本文比较了几种常用的α厚层测量法的定标方法。实验结果表明,共沉淀法是一种比较理想的定标方法,它所制得的标准样品的定标曲线线性较好,探测效率较稳定。