On business process monitoring using cross-flow coordination

This paper presents an approach for monitoring the execution progress of business processes. The monitoring focuses on the exceptions that could arise during this execution and, hence, could make the processes fail if not handled properly and timely. The approach relies on three flows known as control, communication, and navigation. The control flow connects tasks together with respect to a certain business logic. The communication flow captures the messages exchanged between persons/machines when they perform tasks of processes. Finally, the navigation flow captures the interactions between specialized networks that offer solutions to exceptions. These networks are built upon relations between tasks, between persons, and between machines. The coordination of control, communication, and navigation flows focuses on both the actions that are taken and the messages that are exchanged when handling exceptions. A system demonstrating flow development and coordination is, also, presented in the paper.     

Design of dual‐band microstrip patch antenna with right‐angle triangular aperture slot for energy transfer application

This work focusing on the dual‐band antenna design with rectifying circuit for energy transfer system technology for enhancement gain performance. The air gap technique is applied on this microstrip antenna design work to enhance the antenna gain. The work begins with designing and analyzing the antenna via the CST Microwave Studio software. After validation on acceptable performance in simulation side is obtained, the return loss, S₁₁ of the antenna is measured using vector network analyzer equipment. The rectifier circuit is used to convert the captured signal to DC voltage. This projected dual‐band antenna has successfully accomplished the target on return loss of ?44.707 dB and ?32.163 dB at dual resonant frequencies for 1.8 GHz and 2.4 GHz, respectively. This proposed antenna design benefits in low cost fabrication and has achieved high gain of 6.31 dBi and 7.82 dBi for dual‐band functioning frequencies.     

Approved algorithmic security enhancement of stream cipher for advanced mobile communications

ABSTRACT

Confidentiality and integrity processes are based on SNOW and ZUC algorithms. These standardized algorithms are designed by the 3rd Generation Partnership Project (3GPP) for advanced mobile communication systems. Each algorithm has two S-boxes in its nonlinear layer structure. This paper proposes three different approaches to enhance the security level of both algorithms. The first approach aims to select the best combination of two S-boxes in the nonlinear part of each algorithm. Results showed that the best randomness properties are achieved by combining the Feistel structure (S1-box) and Rijndael (S2-box) in the SNOW algorithm and New Rijndael (S1-box) and Rijndael (S2-box) in the ZUC algorithm. The second approach aims to increase the nonlinearity and complexity of these algorithms by selecting a strong S-box to cascade the best-existing two S-boxes for both algorithms. The third approach is an extension of the former, based on a dynamic reform of such S-boxes as a function of the “Authentication Token” to increase the computational complexity of the upgraded two algorithms. These proposed upgrades are simulated by C language and tested successfully for their statistical properties using the standard NIST SP 800-22 test suite.     

Ubiquitous RFID: Where are we?

After over a half century of development, radio-frequency identification (RFID) is beginning to move into mainstream applications for automatic identification. RFID is widely seen today as one of the key enabling technologies of the “Internet of Things”. However, many challenges still need to be addressed before we can fully benefit from this nascent and ubiquitous technology. In this paper, we present the state of the art of RFID technology and discuss the challenges and open issues in developing next generation RFID applications.     

Privacy issues in a psychiatric context: applying the ISD privacy framework to a psychiatric behavioural monitoring system

Privacy issues are frequently discussed amongst researchers, practitioners and patients in healthcare. However, psychiatric patients’ privacy issues get less attention in information system development (ISD), whereby they are one of the most important stakeholders. This paper applies Carew and Stapleton’s ISD privacy framework to psychiatric monitoring systems to understand the issues that are related to monitoring psychiatric patients’ behaviour. By understanding the privacy issues amongst patients, the research will be able to provide guidance to system developers to produce a privacy-sensitive system that can contribute to the system engineering for international stability. We will elaborate each factor in the framework (physical, social, psychological and informational) and then explain the relationship to the privacy of psychiatric patient.     

A novel visible spectrum images-based pedestrian detection and tracking system for surveillance in non-controlled environments

Multimedia Tools and Applications - For many vision applications, robust detection and tracking of pedestrians in image sequences are essential. In this paper, a hybrid system for pedestrian...     

Nitrogen-doped reduced graphene oxide/Fe2O3 hybrid as efficient catalyst for ammonium nitrate

In this investigation, we successfully synthesized a hybrid material, N-rGO@Fe₂O₃, via a one-step hydrothermal process, comprising nitrogen-doped reduced graphene oxide and α-Fe₂O₃. Thorough characterization using diverse analytical methods validated its structure. Employing this hybrid composite as a catalyst, we studied its efficacy in the catalytic thermal decomposition of ammonium nitrate (AN). The N-rGO@Fe₂O₃/AN composite was prepared using a recurrent spray coating method with 3 % mass of the hybrid material. Thermo-gravimetric (TG) and differential scanning calorimetric (DSC) analyses were employed to investigate the catalytic effect. Computational assessment of Arrhenius parameters was conducted through isoconversional kinetic approaches. Results from the kinetic analysis allowed the determination of the critical ignition temperature. Furthermore, calorific values for pure AN and N-rGO@Fe₂O₃/AN were measured using an oxygen calorimetric bombe, revealing a 41 % reduction in activation energy barrier and a lowering of the critical ignition temperature from 292 °C to 283 °C upon incorporation of the hybrid material. Notably, the surface modification of AN with N-rGO@Fe₂O₃ resulted in an increase of 1440 J/g in the observed calorific values. These findings highlight the potential of N-rGO@Fe₂O₃ as an effective catalyst, offering promising implications for applications in enhancing ammonium nitrate thermal decomposition.     

Photocatalytic Hydrogen Production and Carbon Dioxide Reduction Catalyzed by an Artificial Cobalt Hemoprotein

The covalent insertion of a cobalt heme into the cavity of an artificial protein named alpha Rep (αRep) leads to an artificial cobalt hemoprotein that is active as a catalyst not only for the photo-induced production of H₂, but also for the reduction of CO₂ in a neutral aqueous solution. This new artificial metalloenzyme has been purified and characterized by Matrix Assisted Laser Desorption Ionization-Time of Flight Mass Spectrometry (MALDI-TOF MS), circular dichroism, and UltraViolet–Visible spectroscopy. Using theoretical experiments, the structure of this biohybrid and the positioning of the residues near the metal complex were examined, which made it possible to complete the coordination of the cobalt ion by an axial glutamine Gln283 ligand. While the Co(III)–porphyrin catalyst alone showed weak catalytic activity for both reactions, 10 times more H₂ and four times more CO₂ were produced when the Co(III)–porphyrin complex was buried in the hydrophobic cavity of the protein. This study thus provides a solid basis for further improvement of these biohybrids using well-designed modifications of the second and outer coordination sphere by site-directed mutagenesis of the host protein.     

The influence of Ohmic-vacuum heating on phenol,ascorbic acid and engineering factors of kiwifruit juice concentration process

The antioxidant, phenol, ascorbic acid, electrode corrosion and engineering factors of concentration process of kiwifruit juice by ohmic heating-vacuum conditions (OHVC) were evaluated and compared with ohmic heating under atmospheric conditions (OHAC). Results showed that the total phenol content was decreased with an increasing voltage gradient for both heating modes. The OHVC can better save the antioxidant capacity and ascorbic acid of concentrated samples than the OHAC. The processing time of OHVC was significantly higher than the OHAC at the same voltage gradient (P < 0.05). The electrode corrosion rate at the vacuum mode was 7- to 40-fold higher than the atmospheric mode. The energy efficiency at OHAC was lower than the OHVC. The energy consumption was found in the range of 3.37 to 3.75 MJ kg⁻¹ water for OHAC and 4.08 to 11.09 MJ kg⁻¹ water for OHVC. The electrical conductivity under the vacuum mode was lower than the atmospheric mode.     

Enhanced alkaline stability and performance of alkali‐doped quaternized poly(vinyl alcohol) membranes for passive direct ethanol fuel cell

Direct ethanol fuel cells (DEFCs) emerge as the new research energy field since fast production of electricity, high efficiency conversion, and simple fabrication process. The production cost, conductivity properties, and ethanol permeability of membrane were the main problem that limited the DEFC performance and commercialization. In this study, a low cost, good ionic conductivity and low ethanol permeability of an anion exchange membrane based on incorporation KOH‐doped quaternized poly(vinyl alcohol) (QPVA) membrane (designed as QPVA/KOH) is synthesized and cross‐linked with glutaraldehyde solution. The membrane is expected to cut the production cost and enhance the performance. In this work, an optimum of alkali‐doped concentration has influence the membrane performance. The membrane has reveal high chemical stability even doped with 8‐M KOH solution in 100°C. The morphology of membranes remained unbreakable and achieved high range of ionic conductivity (~10^?2 S cm^?1). The membranes present maximum ionic conductivity 1.29 × 10^?2 S cm^?1 at 30°C and 3.07 × 10^?2 S cm^?1 at 70°C. The ethanol permeability of membrane is lower compared with the commercial membranes. Power density of alkaline DEFCs with platinum‐based catalyst by using cross‐linked QPVA/KOH membrane is 5.88 mW cm^?2, which is higher than commercial membranes at 30°C temperature. At 70°C, power density has increased up to 11.28 mW cm^?2 and significantly increased up to 22.82 mW cm^?2 via the nonplatinum‐based catalyst. Moreover, according to the durability test, the performance of passive alkaline DEFC by using cross‐linked QPVA/KOH membrane has maintained at 36.2% level. With such efficiency, the stack current density has been able to stay above 120 mA cm^?2 for over 1000 hours, at 70°C.