Thermally exfoliated graphene oxide reinforced fluorinated pentablock poly(l‐lactide‐co‐ε‐caprolactone) electrospun scaffolds: Insight into antimicrobial activity and biodegradation

Three‐dimensional fluorinated pentablock poly(l ‐lactide‐co‐ε‐caprolactone)‐based scaffolds were successfully produced by the incorporation of thermally exfoliated graphene oxide (TEGO) as an antimicrobial agent with an electrospinning technique. In a ring‐opening polymerization, the fluorinated groups in the middle of polymer backbone were attached with a perfluorinated reactive stabilizer having oxygen‐carrying ability. The fiber diameter and its morphologies were optimized through changes in TEGO amount, voltage, polymer concentration, and solvent type to obtain an ideal scaffold structure. Instead of the widely used graphene oxide synthesized by Hummer's method, TEGO sheets having a low amount of oxygen produced by thermal expansion were integrated into the fiber structure to investigate the effect of the oxygen functional groups of TEGO sheets on the degradation and antimicrobial activity of the scaffolds. There was no antimicrobial activity in TEGO‐reinforced scaffolds in the in vitro tests in contrast to the literature. This study confirmed that a low number of oxygen functional groups on the surface of TEGO restricted the antimicrobial activity of the fabricated composite scaffolds. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43490.     

Effect of desensitizers on the microleakage of previously restored Class V resin composite restorations

Objectives: The aim of this in vitro study was to evaluate the effect of different desensitizers’ application on the microleakage of previously restored Class V composite resin restorations.

Materials and methods: Class V cavities were prepared on the buccal surfaces of 40 extracted human third molars. Forty box-shaped cavities were divided into four groups, based on the desensitizers used (n = 10). All teeth were restored with the same bonding agent and composite material. No desensitizer was applied in the control group. In the experimental groups, BisBlock, Gluma and Universal bonding agents were the desensitizers. The desensitizers were applied after completion of composite restorations according to manufacturers’ instructions. All specimens were then thermocycled at 5–55 °C, with a 10-s dwell time for 500 cycles. The samples were then immersed in 0.5% methylene blue dye for 24 h, sectioned into two equal halves, evaluated for microleakage using a stereomicroscope at 30× magnification and scored on a scale of 0–3. The data were analysed using the Kruskal–Wallis test at the significance level p < 0.05.

Results: There were no significant differences in microleakage after desensitizer application (p > 0.05). However, based on the obtained numerical values in our study, while the BisBlock and bonding groups showed lower microleakage at the occlusal margin, BisBlock, Gluma and bonding group showed lower microleakage at the gingival margin compared to the control group.

Conclusions: The application of desensitizers as a post-treatment option could be considered an advisable procedure to minimize microleakage.     

Influence of activator on the strength and drying shrinkage of alkali-activated slag mortar

The development of new binders, as an alternative to traditional cement, by the alkaline activation of industrial by-products (i.e. ground granulated slag and fly ash) is an ongoing research topic in the scientific community [Puertas F, Amat T, Jimenez AF, Vazquez T. Mechanical and durable behaviour of alkaline cement mortars reinforced with polypropylene fibres. Cem Concr Res 2003;33(12): 2031–6]. The aim of this study was to investigate the feasibility of using and alkaline activated ground Turkish slag to produce a mortar without Portland cement (PC).Following the characterization of the slag, mortar specimens made with alkali-activated slag were prepared. Three different activators were used: liquid sodium silicate (LSS), sodium hydroxide (SH) and sodium carbonate (SC) at different sodium concentrations. Compressive and flexural tensile strength of alkali-activated slag mortar was measured at 7-days, 28-days and 3-months. Drying shrinkage of the mortar was measured up to 6-months. Setting times of the alkali-activated slag paste and PC paste were also measured.Setting times of LSS and SH activated slag pastes were found to be much slower than the setting time of PC paste. However, slag paste activated with SC showed similar setting properties to PC paste.LSS, SH and SC activated slag mortar developed 81, 29, and 36 MPa maximum compressive strengths, and 6.8, 3.8, and 5.3 MPa maximum flexural tensile strengths at 28-days. PC mortar developed 33 MPa compressive strength and 5.2 MPa flexural tensile strength. LSS and SH activated slag mortars were found to be more brittle than SC activated slag and PC mortars.Slag mortar made with LSS had a high drying shrinkage, up to six times that of PC mortar. Similarly, slag mortar made with SH had a shrinkage up to three times that of PC mortar. However, SC activated slag mortar had a lower or comparable shrinkage to PC mortar. Therefore, the use of SC as an activator for slag mortar is recommended, since it results in adequate strength, similar setting times to PC mortar and comparable or lower shrinkage.     

Direct observation of maternal sensitivity and dyadic interactions in the home: Relations to maternal thinking.

This study assessed whether 3 forms of maternal views (recall of her own parental acceptance, the sense of self, and perceptions of the child) are related to each other and to mother–child interaction. The Mother–Father–Peer Scale was sent to mothers of infants aged 11–19 mo; 37 mothers were selected as extremes on the basis of the Acceptance subscale. Ss were observed in their homes using Ainsworth-type observations. The Maternal Sensitivity Scale, Dyadic Physical Avoidance Scale, and Dyadic Harmony Classification by M. D. Ainsworth et al (1978) were used. Mothers were sent questionnaires assessing the sense of self and perceptions of the child. There was 84% concordant classification between recall of parental acceptance and the observationally assessed dyadic harmony classification. Furthermore, mothers' recall of parental acceptance, perception of infant responsiveness, covert anxiety, and the observational measures showed intriguing relationships with each other. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Seismic microzonation of the historic peninsula of İstanbul

In this study, the geological and geotechnical conditions of old Istanbul (Fatih and Eminönü provinces) were investigated in detail and a seismic microzonation study was undertaken for this historical peninsula, which is the site of many ancient structures. Dynamic site response, liquefaction potential and slope stability analyses were carried out, based on field and laboratory tests and earthquake time histories computed with respect to probabilities of exceedance of 10 and 40% in 50 years. The output data obtained from the analyses were evaluated by GIS techniques, and ground shaking, liquefaction susceptibility and landslide hazard maps were prepared.     

Effect of Messaging Model on the Reliable Data Transfer Latency in a Fog System

Journal of Network and Systems Management - IoT applications have become a pillar for enhancing the quality of life. However, the increasing amount of data generated by IoT devices places pressure...     

Computer Vision and Pattern Recognition 2020

International Journal of Computer Vision -