PMMA‐multigraft copolymers derived from linseed oil,soybean oil,and linoleic acid: Protein adsorption and bacterial adherence

Synthesis of Poly(methyl methacrylate), PMMA‐multigraft copolymers derived from linseed oil, soybean oil, and linoleic acid PMMA‐g‐polymeric oil/oily acid‐g‐poly(3‐hydroxy alkanoate) (PHA), and their protein adsorption and bacterial adherence have been described. Polymeric oil/oily acid peroxides [polymeric soybean oil peroxide (PSB), polymeric linseed oil peroxide (PLO), and polymeric linoleic acid peroxide (PLina)] initiated the copolymerization of MMA and unsaturated PHA‐soya to yield PMMA–PLO–PHA, PMMA–PSB–PHA, and PMMA–PLina–PHA multigraft copolymers. PMMA–PLina–PHA multigraft copolymers were completely soluble while PMMA–PSB–PHA and PMMA–PLO–PHA multigraft copolymers were partially crosslinked. Crosslinked parts of the PLO‐ and PSB‐multigraft copolymers were isolated by the sol gel analysis and characterized by swelling measurements in CHCl₃. Soluble part of the PLO‐ and PSB‐multigraft copolymers and completely soluble PLina‐multigraft copolymers were obtained and characterized by spectroscopic, thermal, gel permeation chromatography (GPC), and scanning electron microscopy (SEM) techniques. In the mechanical properties of the PHA–PLina–PMMA, the elongation at break is reduced up to ～ 9%, more or less preserving the high stress values at its break point (48%) when compared to PLina‐g‐PMMA. The solvent casting film surfaces were studied by means of adsorption of blood proteins and bacterial adhesion. Insertion of the PHA into the multigraft copolymers caused the dramatic increase in bacterial adhesion on the polymer surfaces. PHA insertion into the graft copolymers also increased the protein adsorption. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Influence of the suspension media on the thermal treatment of mesophilic lactococcal bacteriophages

The thermal resistances of the Lactococcus lactis phages P008 (a heat-sensitive wide-spread phage) and P680 (a heat-resistant phage) suspended in milk and in solutions supplemented with milk components were studied to elucidate the protective role of milk on phage inactivation. For both phages a decrease of inactivation was observed in casein solution. Furthermore, the inactivation kinetics of the phages in whey, in whey cream (3.5%, 20%, 30% fat) and in whey protein concentrate (0.7%, 5%, 10% protein) were tested. The inactivation experiments in whey cream and in whey protein concentrate having different concentrations of fat and protein revealed that fat had no influence on the inactivation, while, in contrast, the presence of protein had a protective effect.     

Direct observation of maternal sensitivity and dyadic interactions in the home: Relations to maternal thinking.

This study assessed whether 3 forms of maternal views (recall of her own parental acceptance, the sense of self, and perceptions of the child) are related to each other and to mother–child interaction. The Mother–Father–Peer Scale was sent to mothers of infants aged 11–19 mo; 37 mothers were selected as extremes on the basis of the Acceptance subscale. Ss were observed in their homes using Ainsworth-type observations. The Maternal Sensitivity Scale, Dyadic Physical Avoidance Scale, and Dyadic Harmony Classification by M. D. Ainsworth et al (1978) were used. Mothers were sent questionnaires assessing the sense of self and perceptions of the child. There was 84% concordant classification between recall of parental acceptance and the observationally assessed dyadic harmony classification. Furthermore, mothers' recall of parental acceptance, perception of infant responsiveness, covert anxiety, and the observational measures showed intriguing relationships with each other. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Seismic microzonation of the historic peninsula of İstanbul

In this study, the geological and geotechnical conditions of old Istanbul (Fatih and Eminönü provinces) were investigated in detail and a seismic microzonation study was undertaken for this historical peninsula, which is the site of many ancient structures. Dynamic site response, liquefaction potential and slope stability analyses were carried out, based on field and laboratory tests and earthquake time histories computed with respect to probabilities of exceedance of 10 and 40% in 50 years. The output data obtained from the analyses were evaluated by GIS techniques, and ground shaking, liquefaction susceptibility and landslide hazard maps were prepared.     

Synthesis and film properties of epoxy esters modified with amino resins from glycolysis products of postconsumer PET bottles

Glycolysis of waste polyethylene terephthalate (PET) flakes obtained from grinding postconsumer bottles was carried out at 225–250°C and molar ratios of PET/ethylene glycol were taken as 1/1, 1/1.5, 1/5, and 1/10. Reaction product was extracted by hot water for three times and water‐soluble crystallizable fraction and water‐insoluble fraction were obtained. These fractions were characterized by acid and hydroxyl value determinations, differential scanning calorimeter analysis, and ¹H‐NMR analysis. Glycolysis product was used for synthesis of PET‐based epoxy resin. This epoxy resin was used to prepare epoxy ester resins having 40% and 50% oil content. Epoxy ester resin having 40% oil content was modified with urea‐formaldehyde and melamine‐formaldehyde resins for synthesis of epoxy ester–amino resin. Physical and chemical film properties of epoxy ester and modified epoxy ester resins were investigated. All the epoxy ester and modified epoxy ester films were having excellent adhesion, water, and salt water resistance properties. Modification of PET‐based epoxy ester resins with amino resin has significantly improved hardness, impact resistance, and alkaline and acid resistance of resin films. As a result, PET oligomers obtained from glycolysis of postconsumer PET bottles are suitable for manufacturing of amino‐resin‐modified epoxy ester resins that have improved physical and chemical surface coating properties. POLYM. ENG. SCI., 55:2519–2525, 2015. © 2015 Society of Plastics Engineers     

Synthesis and characterization of a Zr‐containing silicate‐based epoxy‐functional polymer nanocomposite system

As a continuation of efforts to explore the potential of certain types of polymer nanocomposites to be successful candidates as dental restoration/adhesion materials, a Zr‐containing and organically modified silicate‐based material system with epoxy functionality was prepared by use of a sol–gel synthesis method, and UV light‐ and visible light (VL)‐curing processes. Comparative influences of the synthesis and processing parameters on the mechanical, thermal, and microstructural/nanostructural properties of the system were detailed. Zr‐containing species proved to more effectively catalyze the epoxy polymerization/crosslinking reactions than those containing Ti. Incorporation of Zr into the nanocomposite network led to significantly advanced mechanical properties. An elastic (Young's) modulus value of 23 MPa was achieved. The system with relatively high Zr content was successfully obtained, which also had higher thermal stability. Overall observations and results suggested that Zr content, and the UV light‐ or VL‐curing process could be capitalized on to modify the structure, and to improve the final properties of these material systems, which indicated a prospective opportunity for this material system to be utilized in dental restoration/adhesion applications. POLYM. ENG. SCI., 55:792–798, 2015. © 2014 Society of Plastics Engineers     

3D Model compression using Connectivity-Guided Adaptive Wavelet Transform built into 2D SPIHT

Connectivity-Guided Adaptive Wavelet Transform based mesh compression framework is proposed. The transformation uses the connectivity information of the 3D model to exploit the inter-pixel correlations. Orthographic projection is used for converting the 3D mesh into a 2D image-like representation. The proposed conversion method does not change the connectivity among the vertices of the 3D model. There is a correlation between the pixels of the composed image due to the connectivity of the 3D mesh. The proposed wavelet transform uses an adaptive predictor that exploits the connectivity information of the 3D model. Known image compression tools cannot take advantage of the correlations between the samples. The wavelet transformed data is then encoded using a zero-tree wavelet based method. Since the encoder creates a hierarchical bitstream, the proposed technique is a progressive mesh compression technique. Experimental results show that the proposed method has a better rate distortion performance than MPEG-3DGC/MPEG-4 mesh coder.