The biological mechanisms of butanol tolerance and the application of solvent-tolerant bacteria for environmental protection

Toxicity caused by the accumulation of butanol in fermentation media is an important factor limiting the concentration of butanol. There is currently no systematic research in place investigating the butanol tolerance mechanism of bacteria such as Clostridium acetobutylicum, which adapts to butanol stress and regulates its growth and metabolism. Here, research results related to the butanol tolerance of C. acetobutylicum are reviewed to understand the molecular basis of changes in butanol-tolerant strains. Organic solvent-tolerant bacteria play an important role in the fields of biofuel production, enzyme preparation and bioremediation. An analysis of limitations of the application of organic solvent-tolerant bacteria has revealed that future research should focus on combining the microbial tolerance phenotype with specific utilization to achieve an optimal balance between organic solvent tolerance and production. This review serves as a reference for the improvement and engineering of strains that tolerate organic solvents. © 2019 Society of Chemical Industry     

超细粉在内循环流化床中的流态化特性

在内径120 mm的半圆柱形内循环流化床中,以平均粒径387 nm的Ti O2为原料,考察了单独通入流化气、射流气和同时通入流化气和射流气三种流化方式下超细粉的流化特性以及射流气速对超细粉聚团尺寸的影响。结果表明:同时通入流化气和射流气时,流化气能促进粉体循环,消除环隙死区;高速射流能有效破碎聚团,显著减小聚团尺寸,从而使超细粉在环隙区与导流管之间形成稳定循环,小聚团在环隙区实现平稳流态化。随着射流气速的增大,聚团尺寸减小,粒度分布变窄,在射流气速分别为60,90,120,150 m/s的条件下,聚团平均直径分别为194,158,147,135μm。     

Wearing prediction of stellite alloys based on opposite degree algorithm

In order to predict the wearing of stellite alloys,the related methods of rare metals data processing were discussed. The method of opposite degree(OD) algorithm was put forward to predict the wearing of stellite alloys.OD algorithm is based on prior numerical data, posterior numerical data and the opposite degree between numerical forecast data. To compare the performance of predicted results based on different algorithms, the back propagation(BP) and radial basis function(RBF) neural network methods were introduced. Predicted results show that the relative error of OD algorithm is smaller than those of BP and RBF neural network methods. OD algorithm is an effective method to predict the wearing of stellite alloys and it can be applied in practice.     

Wear mechanism of a novel AlSiMgAl2O4Al2O3 composite used in the low vessel of an RH secondary refining furnace

A novel AlSiMgAl₂O₄Al₂O₃ composite brick was prepared and evaluated in the low vessel of an RH (the initials of Ruhrstahl and Hereaeus) secondary refining furnace; it was characterized by X-ray diffraction, scanning electron microscopy, and energy-dispersive spectroscopy. The results show that after use, the AlSiMgAl₂O₄Al₂O₃ composite has a functional gradient with an erosion zone–reinforced zone–original zone phase distribution, in which the phases in the erosion zone (0–1.8?cm) are a Mg-hercynite spinel solid solution, α-Al₂O₃, and minor amount of Al₃Fe₅O₁₂. Furthermore, the phases in the reinforced zone (1.8–5.0?cm) are γ-AlON, 21RSiAlON, SiC, Mg_0.388Al_2.408O₄, and α-Al₂O₃; i.e., the Al and Si in the composite are completely converted into non-oxide reinforced phases. Finally, the phases in the original zone (>5.0?cm) show no change. The reaction mechanism is as follows. During operation, a Mg-hercynite spinel solid solution is formed in the erosion zone due to a reaction between MgAl₂O₄ and FeO from a refinery operation. Therefore, the slag erosion of the material is improved. The Al and Si metals undergo active oxidation, and 21RSiAlON flakes are subsequently formed from the products of the metastable Al₂O(g), SiO(g), and N₂(g) in the ambient. The γ-AlON is formed by a carbothermal reduction nitridation of the α-Al₂O₃ and residual active carbon from the resin binder. The 21RSiAlON and γ-AlON reinforce the composite brick and improve its high temperature performance accordingly. Its service life is 110% that of the magnesia-chrome bricks used in the same period. The reaction model was also established.     

PIXE study on recovery of making-technology of Chinese Longquan celadon made in the Southern Song Dynasty (1127–1279 CE)

Proton induced X-ray emission (PIXE) technique and factor analysis were used to study the recovery of making-technology of Chinese Longquan celadon made in the late Southern Song Dynasty (1127–1279 CE). Based on factor analysis, for the raw material for body and the recipe for glaze, there is a close but slightly different relationship between these Longquan celadons unearthed from the core area of Dayao and the non-core area, despite all the Longquan celadons belong to the high-calcium-glaze system. The chemical compositions of most of the tentative body and glaze samples are very close to those of Longquan celadons unearthed from the core area of Dayao and the non-core area. This study can provide a guidance for recovery of making-technology of Longquan celandon.