气相色谱法测定有机化合物的蒸发热

本文用气相色谱测定了多种烷烃、芳烃、醇类和酯类的蒸发热。结果表明,测定数据与文献数据基本一致,误差一般在±5%以内。是一种简单、快捷的测定方法。     

Simulation of continuous solid‐phase polymerization of nylon 6,6. III. Simplified model

Solid‐phase polymerization (SPP) reactors are used to increase the degree of polymerization (DP) during nylon 6,6 production. In previous articles, a reactor model with partial differential equations (PDEs) in time and two spatial dimensions was developed to describe dynamic changes in polymer property profiles (DP, temperature, and moisture content) over the height of the reactor and within the polymer particles. In the current article, a simplified model is developed by deriving appropriate expressions for heat‐ and mass‐transfer coefficients and performing a lumped heat‐ and mass‐transfer analysis. Using this approach, the radial dimension is removed from the PDEs, so that the effort required to solve the model equations is substantially reduced. Predictions of the complex and simplified models are compared through simulation of two different start‐up processes. Good agreement between simplified and complex models is obtained, indicating that the simplified model can be used in place of the complex model if the polymer properties profiles within individual particles are not of particular concern to the model user. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3701–3712, 2003     

提高发酵过程乙醇分离效率的新型反应器

设计了一种新型的带侧臂循环的气升式反应器,该反应器可以有效地把真空闪蒸发酵和汽提发酵2项技术结合起来。实验结果表明,与单独的汽提和闪蒸过程相比,利用此反应器进行同步汽提闪蒸操作,大大提高了乙醇的移出效率,从而进一步提高了发酵强度。     

有机溶剂热生长技术制备硫族化合物及其光学特性的研究

以有机溶剂热生长技术(solvothermaltechnique)制备了半导体硫族化合物(CdS、ZnS、MoS2)等纳米颗粒,采用XRD、TEM等技术对其结构进行表征.以ITO导电玻璃以及导电聚合物(PANI、PPY)膜为基底,将纳米颗粒涂布其上并以PL法研究其光学特性,实验结果表明:经修饰后,材料的荧光发射位置发生显著的变化.     

超细纤维素胶体和丙烯酰胺的接枝共聚

本文用纤维素材料经酸分解制备具有平衡聚合度（LODP）的微晶纤维素，再分散成超细纤维素胶体（准均相纤维素体系）。用扫描电镜（SEM）观察处理前后的纤维素颗粒尺寸，并比较它们和丙烯酰胺接枝共聚的反应速率、聚合转化率、接枝率、接技效率、聚丙烯酰胺支链的分子量及其分布的情况。     

环己烷液相无催化剂的氧化动力学研究

采用搅拌釜反应器,在确认已排除传质因素对反应速率影响的情况下,研究了环己烷液相无催化剂的氧化反应动力学。应用自由基理论及最优化计算技术,从导出的8个候选动力学模型中,确定了最佳的动力学模型,它能满意地描述环已烷氧化过程。该动力学可为环己烷氧化工业生产操作条件的优化、反应器的选型及工业设计提供依据。     

对苯二甲酸加氢精制的反应规律

在高压磁力搅拌间歇反应釜中研究了粗对苯二甲酸在 Pd- C催化剂上加氢精制反应的规律。实验温度范围为 2 75～ 2 95℃ ,实验压力范围为 6 .0 8～ 8.0 8MPa(表压 )。研究发现加氢反应速率随着催化剂量和氢分压的增加而提高 ,在实验温度范围内 ,提高加氢温度 ,反应速率反而有所下降 ;投料中对苯二甲酸的质量浓度对反应速率也有一定影响 ,在 2 82℃反应条件下合适的质量分数为 2 5 %。     

碳四烷烃催化裂解制低碳烯烃的研究进展

论述了碳四烷烃催化裂解制低碳烯烃的催化剂体系、影响因素及催化裂解方式。该催化剂体系包括硅铝酸盐及锆硫酸盐,氧化铝与碱金属或碱土金属的混合物,负载型催化剂等3种类型。其中分子筛(晶体硅铝酸盐)及其改性催化剂是研究开发的主要方向。除操作条件外,稀释剂、引发和抑制剂和裂解反应方式对催化裂解反应均有影响。催化裂解反应机理与催化剂的种类和反应条件相关。对于酸性分子筛催化剂有2种比较公认的机理:正碳离子机理,自由基与正碳离子机理两种形式。研究表明碳四烷烃,特别是正丁烷催化裂解制低碳烯烃具有良好的低碳烯烃收率,收率可达50%以上。     

Response of the seated human body to whole-body vertical vibration: biodynamic responses to sinusoidal and random vibration

The dependence of biodynamic responses of the seated human body on the frequency, magnitude and waveform of vertical vibration has been studied in 20 males and 20 females. With sinusoidal vibration (13 frequencies from 1 to 16 Hz) at five magnitudes (0.1–1.6 ms^? 2 r.m.s.) and with random vibration (1–16 Hz) at the same magnitudes, the apparent mass of the body was similar with random and sinusoidal vibration of the same overall magnitude. With increasing magnitude of vibration, the stiffness and damping of a model fitted to the apparent mass reduced and the resonance frequency decreased (from 6.5 to 4.5 Hz). Male and female subjects had similar apparent mass (after adjusting for subject weight) and a similar principal resonance frequency with both random and sinusoidal vibration. The change in biodynamic response with increasing vibration magnitude depends on the frequency of the vibration excitation, but is similar with sinusoidal and random excitation.     

Response of the seated human body to whole-body vertical vibration: discomfort caused by sinusoidal vibration

Frequency weightings for predicting vibration discomfort assume the same frequency-dependence at all magnitudes of vibration, whereas biodynamic studies show that the frequency-dependence of the human body depends on the magnitude of vibration. This study investigated how the frequency-dependence of vibration discomfort depends on the acceleration and the force at the subject–seat interface. Using magnitude estimation, 20 males and 20 females judged their discomfort caused by sinusoidal vertical acceleration at 13 frequencies (1–16 Hz) at magnitudes from 0.1 to 4.0 ms^? 2 r.m.s. The frequency-dependence of their equivalent comfort contours depended on the magnitude of vibration, but was less dependent on the magnitude of dynamic force than the magnitude of acceleration, consistent with the biodynamic non-linearity of the body causing some of the magnitude-dependence of equivalent comfort contours. There were significant associations between the biodynamic responses and subjective responses at all frequencies in the range 1–16 Hz.

Practitioner Summary: Vertical seat vibration causes discomfort in many forms of transport. This study provides the frequency-dependence of vibration discomfort over a range of vibration magnitudes and shows how the frequency weightings in the current standards can be improved.