The stress intensity factors for a short crack partially penetrating an inclusion of arbitrary shape

Some approximate solutions for predicting the stress intensity factor of a short crack penetrating an inclusion of arbitrary shape have been developed under mode I and mode II loading conditions. The derivation of the fundamental formula is based on the transformation toughening theory. The transformation strains in the inclusion are induced by the crack-tip field and remotely applied stresses, and approximately evaluated by the Eshelby equivalent inclusion theory. As validated by detailed finite element (FE) analyses, the developed solutions have good accuracy for different inclusion shape and for a wide range of modulus ratio between inclusion and matrix material.     

富氧燃烧技术在梭式窑中的应用

研究了富氧燃烧技术对梭式窑烧成的影响.研究结果表明,随着氧浓度从21%-30%的逐渐增加,CO总浓度和NO总浓度都先明显下降,后缓慢上升;节能效果在初始段较为明显,而后效果不明显;而实际烟气量与氧浓度成反比,与过剩空气系数成正比.     

主跨348m+348m三塔单索面PC梁斜拉桥

宜昌市夷陵长江大桥采用三塔斜拉桥，总体布置为(128．08 348 348 120．35)m。介绍了该桥的合理性及结构特点。     

介孔氧化铁对正辛醇乙氧基化反应的催化性能

以十二烷基磺酸钠为模板剂、乙二胺为碱性介质,将水热法合成的氧化铁/十二烷基磺酸钠复合中孔材料在550℃、空气气氛中煅烧10h,除去模板剂,得到介孔氧化铁。通过X射线衍射、氮气吸附-脱附方法对介孔氧化铁的晶体结构和表面物性进行表征。表征结果显示,煅烧后的介孔氧化铁具有典型的六方介孔的结构特征,平均孔径为5.4nm。将介孔氧化铁用于催化正辛醇乙氧基化反应,研究结果表明,升高反应温度和初始压力、增加催化剂用量,可加快环氧乙烷的反应速率,同时产物的相对分子质量分布较窄。当平均聚合度为6.5时,正辛醇聚氧乙烯醚相对分子质量分布的选择性系数达到21.1。     

裂齿矩形翅片板翅式换热器优化设计的分析

对裂齿矩形翅片板翅式换热器中的裂齿矩形翅片的传热效率作了分析,并以单位质量材耗的换热能力最大为目标函数,分析研究了在不同雷诺数(Re)的操作条件下裂齿矩形翅片间角度、翅片厚、长度、宽度及极厚之间的关系。结果表明:在气体换热的场合下,当Re在某一范围时翅片可有效地起到强化传热的作用。当板厚为5mm,翅片厚为3mm,翅片间夹角为45°～70°,Re为2×10~3～8×10~3,最佳翅片纵向间距与翅片长度和翅片厚度乘积的平方根的比为1.5～2.5,最佳翅片尺寸系数为3～5时,传热强化效果较好。     

对称非线性系统的无交互控制

本文讨论了具有对称性的非线性系统的无交互控制问题。通过定义对称系统的导出分布族的新概念,我们得出了问题可解的条件。我们取得的结果较不具对称性的情况要简单一些。从而说明,对称性不仅使得系统具有较好的结构,而且使得它的其它一些问题的研究得到简化。     

钻井液固相化学清洁剂ZSC-201的合成及性能

介绍了钻井液用固相化学清洁剂ZSC－201的室内合成及性能评价，结果表明，固相化学清洁剂ZSC－201具有较强的抑制性，可有效抑制粘土水化分散，保证钻井液清洁，在钻井液体系中与阴、阳离子型钻井液处理剂配伍性好，同时具有较好的抑制增效作用，在有效的加量内对钻井液滤矢量和流变性等影响小，固相化学清洁剂ZSC－201已在中原油田近30口井中应用，具有良好的推广应用前景。     

Stochastic nonlinear stabilization — II: Inverse optimality

After considering the stabilization of a specific class of stochastic nonlinear systems in a companion paper, in this second part, we address the classical question of when is a stabilizing (in probability) controller optimal and show that for every system with a stochastic control Lyapunov function it is possible to construct a controller which is optimal with respect to a meaningful cost functional. Then we return to the problem from Part I and design an optimal backstepping controller whose cost functional includes penalty on control effort and which has an infinite gain margin.