Pleurotusostreatus and Agaricus subrufescens: investigation of chemical composition and antioxidant properties of these mushrooms cultivated with different handmade and commercial supplements

In this study, the chemical composition, total phenolic content and antioxidant activity (DPPH, ORAC and FRAP assays) of A. subrufescens and P. ostreatus, cultivated with handmade and commercials supplements, were compared. Additionally, the compounds ergosterol, saccharopine, and hexitol were identified in A. subrufescens by HPLC-MS/MS. The antioxidant compound p-coumaric acid and dihexoses was found in both mushroom species. A. subrufescens presented higher total phenolic content (73.8 ± 0.6 mg GAE 100 g⁻¹) and antioxidant activity than P. ostreatus (16.6 ± 0.5 mg GAE 100 g⁻¹). The handmade supplement based on the waste of noble grains presented statistically similar phenolic content to the mushrooms cultivated with commercial ones Spawn Mate II SE (86.1 ± 1.4 and 92.9 ± 0.3 mg GAE 100 g⁻¹, respectively). Therefore, the results support the use of handmade supplements based on agro-wastes as a viable alternative to the use of high-cost commercial ones.     

Occurrence of mycotoxins (ochratoxin A, deoxynivalenol) and toxigenic fungi in Moroccan wheat grains: impact of ecological factors on the growth and ochratoxin A production

The aim of the present work was to evaluate the contamination of some samples, taken from Moroccan wheat grains, by ochratoxin A (OTA), deoxynivalenol (DON) and the associated toxigenic fungi. Moreover, we focused on the influence of environmental factors on both the growth and OTA production by three strains of Aspergillus. The results showed that only few samples were contaminated by the two mycotoxins (2 samples for OTA and 7 for DON). The main isolated fungi belong to the Aspergillus, Penicillium and Fusarium genus; 74 Aspergillus and 28 Penicillium isolates were tested for their ability to produce OTA. Only 2 A. alliaceus and 14 A. niger were able to synthesize OTA. However, none of Penicillium isolates can produce this toxin under the conditions mentioned. In respect of the effects of the temperature and water activity (aw), the optimal conditions for the growth and OTA production were different. While the optimal conditions of growth for A. alliaceus and A. terreus are 30 degrees C and 0.98 aw, A. niger preferred 0.93-0.95 aw at 25 degrees C, whereas the optimal production of OTA was observed at 30 degrees C for both A. alliaceus and A. niger at 0.93 and 0.99 aw, respectively.     

Effect of preparation methods on the catalyst performance of Co/MgLa mixed oxide catalyst for COx-free hydrogen production by ammonia decomposition

This work deals with the effect of catalyst preparation method of the mixed Co, Mg and La oxide catalysts on their structure and catalytic properties for ammonia decomposition. Two methods are used for catalysts preparations impregnation and co-precipitation (in air and in pure O₂ atmosphere), The Mg/La = 2 molar ratio and 5 wt% of cobalt content was maintained same in all catalysts. The catalyst performance was evaluated in the temperature range 300–550 °C at atmospheric pressure. The prepared catalysts were characterized by BET, XRD, TPR, XPS, CO₂-TPD and SEM techniques. No pronounced differences were observed in BET among the catalysts. It was found that the 5CML-OXY (5 wt%Co over MgLa catalyst prepared by co-precipitation method in oxygen atmosphere) has superior activity among the other catalysts. This could be attributed to availability of easily reducible cobalt species determined by TPR studies and enhanced interaction between Mg and La determined by SEM and XPS. The moderate basic site density determined by CO₂-TPD results was also increased in 5CML–OXY catalysts compared with other catalysts. These consequences are might be one of the reasons for enhanced activity of 5CML–OXY catalyst compared to other catalysts. Hence catalyst preparation by co-precipitation in oxygen atmosphere is the best method which might be one of the parameters that influenced on catalytic properties of the cobalt on MgOLa₂O₃ system, for ammonia decomposition.     

Numerical research of double‐diffusive natural convection in elliptical cylinders: Effect of thermal Rayleigh number

This paper is the first part of a two‐part study, and it presented numerical research of double‐diffusive natural convection within an annulus area, situated in two horizontal confocal elliptic solids charged by a Newtonian fluid. The elliptical coordinates were used to transform the physical domain into a rectangular one. To resolve the governing equations and the boundary layer conditions, a calculator code based on the finite volume approach was developed. The details of the influences of thermal Rayleigh number on heat and mass transfer were investigated. Results obtained were compared with those existing in other reasearch works.     

The news-vendor problem with drop-shipping and resalable returns

As e-commerce expands, more and more products are offered online to attract internet consumers’ interest. These products are then shipped to consumers’ home by a drop-shipper. Drop-shipping seems to be a good option to sell products in addition to physical stores. Furthermore, both types of products, either sold in store or on Internet can be returned by consumers, with often a higher return ratio for those purchased on Internet. To model these two sales channel and the interactions between them, we consider a News-Vendor (NV) managing both a physical store and an online sale channel that can be fulfilled by a drop-shipping option. We also consider the possibility of reselling products that are returned by consumers during the selling season. The concavity of the expected profit is proven and the optimality condition is obtained. Promising results are obtained from a numerical analysis. In particular, we show that the expected profit can be 14.4% less than the optimal expected profit if the return effect is ignored. Using drop-shipping option can reduce the optimal store inventory by 31.2% and if the NV has no drop-shipping option, the expected profit can be 9% less.     

Effect of food matrix and cell growth on PCR-based detection of Escherichia coli O157:H7 in ground beef

The purpose of this work was (i) to investigate the feasibility of a previously reported upstream processing method for PCR template preparation to facilitate the detection of Escherichia coli O157:H7 from ground beef and (ii) to assess the impact of cell growth (no growth in the matrix versus growth in the matrix) on molecular detection limits. Two food matrices (autoclaved and raw ground beef) were evaluated in all studies. For no-growth experiments, 10-g meat samples were inoculated with 10(2) to 10(7) CFU/g E. coli O157:H7 and then homogenized. The homogenates were processed to remove large particulates and inhibitors using a two-phase upstream processing method consisting of two sequential centrifugation steps, the second of which used titanous hydroxide to facilitate bacterial immobilization. After upstream processing, sample concentrates were extracted for DNA isolation and amplified by PCR. For growth experiments, 10-g meat samples were inoculated at 1 CFU of E. coli O157:H7 per gram, allowed to grow to 10(2) to 10(7) CFU/g, and then processed for PCR assay. Cell recoveries after upstream processing ranged from 15.9 to 77.6% and were not facilitated by the use of titanous hydroxide, as compared with a saline control (P > 0.05). Bacterial cell recovery and PCR detection limits were similar when comparing autoclaved ground beef and raw ground beef, but cell recoveries were highly variable for raw ground beef samples in which E. coli O157:H7 cells were allowed to grow before processing for detection. Overall, PCR detection limits approximated 10(3) CFU/g of ground beef for all treatments. These results indicate that use of model food systems may not always provide an accurate replication of real-world conditions when evaluating PCR detection limits.     

An optimal control of a wastewater treatment reactor by catalytic ozonation

This paper deals with the control of a wastewater treatment pilot by catalytic ozonation. In general, catalytic ozonation processes operate with a deliberate ozone overproduction to obtain a treated water which respects discharge standards. But, in this case, the oxygen consumption is not optimal and the operating costs are important. The objective of this study focuses on the optimization of the catalytic ozonation reactor. A continuous-time transfer function model is identified to represent the pilot behavior, and an optimal control is proposed to obtain a significant abatement of the pollutant. In this application, the pollutant abatement is represented by the absorbance.     

Dynamic behavior of a two-stage gear train used in a fixed-speed wind turbine

The dynamic behavior of a two stage spur gear system used in a typical wind turbine is investigated in this paper. With the purpose of having an accurate simulation, for a given excitations, of the dynamic response of bearings, shafts and teeth in contact.In this study, we developed a lamped mass dynamic model with 12 DOFs. This model is excited by external and internal issues sources. The main factors of these excitations are the variability in the wind resource and the time varying mesh stiffness fluctuation.The aerodynamic torque is calculated from an empirical approach of the power coefficient. The incoming flow is modeled by an analytic equation test varies with time. The differential equations governing the system motion are solved by an implicit Newmark algorithm.     

Improving the performance of retail stores subject to execution errors: coordination versus RFID technology

This paper analyzes a Newsvendor type inventory model in which a manufacturer sells a single product to a retailer store whose inventory is subject to errors stemming from execution problems. Hence, within the store, all of the products are not available on shelf for sales either because the replenishment of the shelf from the backroom is subject to execution errors that mainly result in products lost in the backroom or products misplaced on the other shelves of the store. We compare two situations: in the first situation, the two supply chain actors are aware of errors and optimize their ordering decisions by taking into account this issue. The second situation deals with the case where an advanced automatic identification system such as the Radio Frequency Identification technology is deployed in order to eliminate errors. Each situation is developed for three scenarios: in the centralized scenario, we consider a single decision-maker who is concerned with maximizing the entire supply chain’s profit; in the decentralized uncoordinated scenario, the retailer and the manufacturer act as different parties and do not cooperate. The third scenario is the decentralized coordinated scenario where we give conditions for coordinating the channel by designing a buyback contract. The authors would like to thank the editor, Prof. Dr. Hans-Otto Guenther, and two anonymous referees for their constructive comments to improve this article.