Thermomechanical material parameters characterization of the superalloy PN 3601669-7 under low-velocity impacts

This work concerns the characterization of the thermodynamic behavior of the superalloy Airsist 215 (PN 3601669-7) containing cobalt. Such superalloys are used in aeronautical construction, in the hot parts of the turbine. They are frequently used for the production of the paddles. The parts in service are subjected to dynamic solicitations and thermal fluctuations over the course of time. They are responsible for modification and degradation of material properties. This can lead to the appearance of cracks and, in the long term, to the rupture of these parts. In this paper, a preliminary physical study is made on the appearance of the cracks, followed by experiments using shocks at ambient temperature and under a heating situation which simulates combustion. It is found that these dynamic loads have a significant impact on the development of the cracks that appear on the segments of the turbine nozzle. The study is devoted to the elastic shock of Hertz-Boussinesq extended to viscoelastic bodies by direct convolution of Riemann-Stielges. The interest resides in the local convolution and the distribution of stresses in the contact zone. The shock excitation method includes a deduced force in the load and disload phases. This force is an impulse which approaches a Dirac function. The sample can be modeled approximately by a system of one degree of freedom for natural frequency, damping and transfer function. The spectral response of the specified shock allows calculation of the damping. Every point of this spectrum gives the response for the linear system of the transfer function. Then, viscoelastic shock parameters are deduced.     

Magnetic Properties of Zn1?x Ni x O (0.25≤x≤ 0.50) Prepared by Solid-State Reactions

In this study the origin of ferromagnetism in ZnO-based bulk systems has been investigated using Ni-doped ZnO samples, Zn_1−x Ni _x O with 0.25≤x≤0.50, prepared by solid-state reactions. The structural characterizations indicated that the Ni²⁺ ions almost uniformly distributed in all the samples, and the samples have hexagonal wurtzite structure; however, when x is increased toward 0.50, a new NiO phase is formed. A ferromagnetism (FM) has been observed for all the samples at and below the room temperature. In other words, the room temperature results of (M–H) curves show that the FM observed is intrinsic for all the Ni-doped ZnO samples. However, the saturated magnetizations decrease gradually with increasing Ni concentration. This indicates that, in addition to FM, the excessive doping of Ni in ZnO also causes an antiferromagnetic (AFM) contribution which increases with increasing Ni amount. This result is also supported by the magnetization against temperature measurements. Furthermore, the trend of the ac-susceptibility (χ) versus temperature curves, measured under an ac-magnetic field of 100 Oe, also support our conclusion about the antiferromagnetic contribution to ferromagnetism in our samples.     

A comparative study of the removal of trivalent chromium from aqueous solutions by bentonite and expanded perlite

Local bentonite and expanded perlite (Morocco) have been characterised and used for the removal of trivalent chromium from aqueous solutions. The kinetic study had showed that the uptake of Cr(III) by bentonite is very rapid compared to expanded perlite. To calculate the sorption capacities of the two sorbents, at different pH, the experimental data points have been fitted to the Freundlich and Langmuir models, respectively, for bentonite and expanded perlite. For both sorbents the sorption capacity increases with increasing the pH of the suspensions. The removal efficiency has been calculated for both sorbents resulting that bentonite (96% of Cr(III) was removed) is more effective in removing trivalent chromium from aqueous solution than expanded perlite (40% of Cr(III) was removed). In the absence of Cr(III) ions, both bentonite and expanded perlite samples yield negative zeta potential in the pH range of 2-11. The changes of expanded perlite charge, from negative to positive, observed after contact with trivalent chromium(III) solutions was related to Cr(III) sorption on the surface of the solid. Thus, it was concluded that surface complexation plays an important role in the sorption of Cr(III) species on expanded perlite. In the case of bentonite, cation-exchange is the predominate mechanism for sorption of trivalent chromium ions, wherefore no net changes of zeta potential was observed after Cr(III) sorption. X-ray photoelectron spectroscopy measurements, at different pH values, were also made to corroborate the zeta potential results.     

A Reinforcement Learning Algorithm in Cooperative Multi-Robot Domains

Reinforcement learning has been widely applied to solve a diverse set of learning tasks, from board games to robot behaviours. In some of them, results have been very successful, but some tasks present several characteristics that make the application of reinforcement learning harder to define. One of these areas is multi-robot learning, which has two important problems. The first is credit assignment, or how to define the reinforcement signal to each robot belonging to a cooperative team depending on the results achieved by the whole team. The second one is working with large domains, where the amount of data can be large and different in each moment of a learning step. This paper studies both issues in a multi-robot environment, showing that introducing domain knowledge and machine learning algorithms can be combined to achieve successful cooperative behaviours.     

Broad-Crested Weirs with Rectangular Compound Cross Sections

A series of laboratory experiments was performed in order to investigate the effects of width of the lower weir crest and step height of broad-crested weirs of rectangular compound cross section on the values of the discharge coefficient, the approach velocity coefficient, and the modular limit. For this purpose, nine different broad-crested weir models with rectangular compound cross sections and a model with a rectangular cross section were tested in a horizontal laboratory flume of 11.0 m length, 0.29 m width, and 0.70 m depth for a wide range of discharges. The compound cross sections were formed by a combination of three sets of step heights and three sets of lower weir crest widths. The sill-referenced heads at the approach channel and at the tailwater channel were measured in each experiment. The dependence of the discharge coefficient, approach velocity coefficient, and modular limit values on model parameters was investigated, and these quantities were compared with those of the broad-crested weir models with a rectangular cross section.     

Foreperiod and simple reaction time.

Reviews studies of simple visual and auditory reaction processes published since W. H. Teicher (1954), with emphasis on the preparatory phase of these processes, particularly the foreperiod (FP). The 1st section consists of the analysis of actual FP variables; duration, regularity, range, distribution, and preceding FPs. The 2nd section deals with factors affecting the relation between FP and reaction time (RT): (a) the modality, intensity, probability, and duration of the warning signal and reaction stimulus (RS) and (b) the speed–accuracy trade-off. It is suggested that the S's expectancy (momentary probability of the immediate delivery of the RS) is the most important determinant of the preparation to respond to the RS at any moment during a trial and, hence, of RT. Many factors exert their influence on preparation through their effect on expectancy. Other factors have a direct influence on preparation: short-term exhaustion and fatigue, immediate arousal evoked by intense auditory stimuli, the S's stimulus criterion, the speed–accuracy trade-off, and fluctuation in motor preparedness owing to inaccuracies in the control of motor preparation. (4? p ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A Comparision of the Number of Rational Places of Certain Function Fields to the Hasse-Weil Bounds

We give explicitly the number of rational places of certain function fields in terms of the reciprocals of the zeros of the function fields in question. The results are then compared with the Hasse-Weil bounds by using the approximation theorems of Dirichlet and Kronecker and it turns out that in many of these function fields the number of rational places is near the upper Hasse-Weil bound. Keywords:Function fields, Diophantine approximation, Exponential sums.     

Phosphorus-Enriched Hemodialysis for the Treatment of Hypophosphatemia in a Patient with Severe Lithium Poisoning

Severe lithium poisoning requires intensive and prolonged hemodialysis (HD) treatment in addition to supportive therapy. Aggressive dialytic therapy can bring about hypophosphatemia, especially, in those patients who are normo‐ or hypophosphatemic to begin with. We report here the use of phosphorus (P)‐enriched HD in a hypophosphatemic patient with lithium poisoning. A 58‐year‐old woman with a long history of bipolar disorder treated with chronic lithium therapy presented with progressively worsening confusion and incoherent speech. She was noted to be confused with a labile mood. The serum levels were lithium 3.6 mM, creatinine 1.7 mg/dL, Na 136 mM , K 4.2 mM , CO₂ 21 mM , BUN 23 mg/dL, and P 2.1 mg/dL. After a conventional, 4‐h HD session, she became more hypophosphatemic with a P level of 1.8 mg/dL. A P‐enriched dialysate, prepared by adding a Fleet^® oral saline laxative preparation (containing NaH₂PO₄.H₂O and Na₂HPO₄.7H₂O) to the “base concentrate” of a dual concentrate, bicarbonate‐based dialysate generating system to obtain a final dialysate containing 3 mg (0.97 mM ) of P/dL was used. She underwent 3 subsequent HD sessions using this P‐enriched dialysate, followed by normalization of the serum levels of both lithium and P. Our data suggest that hypophosphatemic patients suffering from severe lithium poisoning requiring intensive HD therapy and becoming more hypophosphatemic as a result of the dialysis treatment can be further dialyzed with a P‐enriched dialysate both to treat the lithium poisoning and to rectify the hypophosphatemia. In general, the use of such dialysates can play an important role in the prevention and treatment of dialysis‐induced hypophosphatemia.

Numerical Study on Effects of Fuel Mixture Fraction and Li-6 Enrichment on Neutronic Parameters of a Fusion–Fission Hybrid Reactor

This study presents the effects of mixture fractions of nuclear fuels (mixture of fissile–fertile fuels and mixture of two different fertile fuels) and ⁶Li enrichment on the neutronic parameters (the tritium breeding ratio, TBR, the fission rate, FR, the energy multiplication ratio, M, the fissile breeding rate, FBR, the neutron leakage out of blanket, L, and the peak-to-average fission power density ratio, Γ) of a deuterium–tritium (D–T) fusion neutron-driven hybrid blanket. Three different fertile fuels (²³²Th, ²³⁸U and ²⁴⁴Cm), and one fissile fuel (²³⁵U) were selected as the nuclear fuel. Two different coolants (pressurized helium and natural lithium) were used for the nuclear heat transfer out of the fuel zone (FZ). The Boltzmann transport equation was solved numerically for obtaining the neutronic parameters with the help of the neutron transport code XSDRNPM/SCALE4.4a. In addition, these calculations were performed by also using the MCNP4B code. The sub-limits of the mixture fractions and ⁶Li enrichment were determined for the tritium self-sufficiency. The considered hybrid reactor can be operated in a self-sufficiency mode in the cases with the fuel mixtures mixed with a fraction of equal to or greater than these sub-limits. Furthermore, the numerical results show that the fissile fuel breeding and fission potentials of the blankets with the helium coolant are higher than with the lithium coolant.