Piperacillin/tazobactam‐induced neurotoxicity in a hemodialysis patient: A case report

Antibiotics are potentially a cause of neurotoxicity in dialysis patients, the most common are the beta‐lactams as ceftazidime and cefepime, and few cases have been reported after piperacillin/tazobactam use. This report presents a case of a hypertensive and diabetic 67‐year‐old woman in regular hemodialysis, which previously had a stroke. She was hospitalized presenting pneumonia, which was initially treated with cefepime. Two days after treatment, she presented dysarthria, left hemiparesis, ataxia, and IX and X cranial nerves paresis. Computed tomography showed no acute lesions and cefepime neurotoxicity was hypothesized, and the antibiotic was replaced by piperacillin/tazobactam. The neurologic signs disappeared; however, 4 days after with piperacillin/tazobactam treatment, the neurological manifestations returned. A new computed tomography showed no new lesions, and the second antibiotic regimen withdrawn. After two hemodialysis sessions, the patient completely recovered from neurological manifestations. The patient presented sequentially neurotoxicity caused by two beta‐lactams antibiotics. This report meant to alert clinicians that these antibiotics have dangerous neurological effects in chronic kidney disease patients.     

Stochastic molecular descriptors for polymers. 4. Study of complex mixtures with topological indices of mass spectra spiral and star networks: The blood proteome case

The Quantitative Structure-Property Relationships (QSPRs) based on Graph or Network Theory are important for predicting the properties of polymeric systems. In the three previous papers of this series (Polymer 45 (2004) 3845-3853; Polymer 46 (2005) 2791-2798; and Polymer 46 (2005) 6461-6473) we focused on the uses of molecular graph parameters called topological indices (TIs) to link the structure of polymers with their biological properties. However, there has been little effort to extend these TIs to the study of complex mixtures of artificial polymers or biopolymers such as nucleic acids and proteins. In this sense, Blood Proteome (BP) is one of the most important and complex mixtures containing protein polymers. For instance, outcomes obtained by Mass Spectrometry (MS) analysis of BP are very useful for the early detection of diseases and drug-induced toxicities. Here, we use two Spiral and Star Network representations of the MS outcomes and defined a new type of TIs. The new TIs introduced here are the spectral moments (π_k) of the stochastic matrix associated to the Spiral graph and describe non-linear relationships between the different regions of the MS characteristic of BP. We used the MARCH-INSIDE approach to calculate the π_k(SN) of different BP samples and S2SNet to determine several Star graph TIs. In the second step, we develop the corresponding Quantitative Proteome-Property Relationship (QPPR) models using the Linear Discriminant Analysis (LDA). QPPRs are the analogues of QSPRs in the case of complex biopolymer mixtures. Specifically, the new QPPRs derived here may be used to detect drug-induced cardiac toxicities from BP samples. Different Machine Learning classification algorithms were used to fit the QPPRs based on π_k(SN), showing J48 decision tree classifier to have the best performance. These results suggest that the present approach captures important features of the complex biopolymers mixtures and opens new opportunities to the application of the idea supporting classic QSPRs in polymer sciences.     

Impact of the addition of an enzyme pool on an activated sludge system treating dairy wastewater under fat shock loads

BACKGROUND: The application of lipase‐rich enzyme pools (such as the crude solid enzymatic preparation (SEP) obtained from Penicillium restrictum solid‐state fermentation of agro‐industrial wastes) to activated sludge systems may be an effective strategy for preventing various operational problems. The continuous addition of SEP to the treatment system can become cost‐prohibitive when in situ production and/or storage are factored in. The application of SEP to high‐fat wastewater treatment would only be justified as an emergency measure, such as a sudden increase in the fat content of the bioreactor influent. Therefore, the primary objective of this work was to investigate the efficiency of a crude SEP during fat shock loads, simulated through the periodic addition of dairy industry waste containing high fat concentrations to the feed stock of an activated sludge system, operated in continuous mode. RESULTS: The test bioreactor exhibited a higher average chemical oxygen demand (COD) removal efficiency than the control bioreactor (83% for control and 90% for test) and the fat accumulation in the biological flocs of the test bioreactor was 3.2 times lower than that in the control bioreactor. Turbidity was also lower in the effluent of the test bioreactor (123 and 66 FTU in control and test, respectively) and it had a shorter recovery time between shock loads, especially when the interval between loads was shorter than one month (biweekly and weekly shock loads). CONCLUSION: The addition of SEP during fat overloads in the reactor feed maintained efficient COD removal in the test bioreactor for 270 days without any operational problems. Copyright © 2008 Society of Chemical Industry     

Acromioclavicular joint cyst and rotator cuff tear

The role of a depressor factor, atrial natriuretic peptide, in the development of arterial hypertension in adolescents with pubertal hypothalamic syndrome was studied in 52 patients and 13 healthy males aged 13-24 years. The duration of disease was 2-11 years. Radioimmunological methods were used to measure plasma atrial natriuretic peptide, plasma renin activity, and serum aldosterone. Patients with borderline arterial hypertension were found to have a significant reduction in their atrial natriuretic peptide levels, and this correlated directly with the renin-aldosterone system, demonstrating insufficiency of the depressor system in patients with pubertal hypothalamic syndrome and the involvement of atrial natriuretic peptide in the development of arterial hypertension, along with disturbances in the functional relationship between atrial natriuretic peptide and the renin-aldosterone system.     

A New Triazole-Thiol Compound Organofunctionalized on the Silica Gel Surface: Chemical Properties and Copper Sorption in Ethanol / Water Media

Silicon - This study describes the preparation and characterization of 3-chloropropyl silica gel with 4-amino-5-(4pyridyl)-4H-1,2,4-triazole-3-thiol (SGA) for copper adsorption in different media....     

Ethylene-propylene copolymers by a supported Ziegler-Natta catalyst based on TiCl4/MgCl2

Ethylene-propylene copolymers have been prepared by using Ziegler-Natta catalysts based on TiCl₄, MgCl₂, PCl₃ and (n-Bu)₃PO₄. The catalysts TiCl₄/MgCl₂/PCl₃ and TiCl₄/MgCl₂/(n-Bu)₃PO₄ were prepared by reacting TiCl₄ with pretreated MgCl₂. The support was prepared by ball milling of MgCl₂ with varied amounts of PCl₃ or (n-Bu)₃PO₄. The addition of PCl₃ has remarkably increased the MgCl₂ surface area in comparison with (n-Bu)₃PO₄. The effects of PCl₃ and (n-Bu)₃PO₄ on ethylene homopolymerization, ethylene-propylene copolymerization and on copolymer properties were evaluated. The catalyst system containing PCl₃ permitted to synthesize propylene-ethylene copolymers with up to 75% (w/w) of propylene and provided control of copolymer crystallinity. The reduction of the copolymer molecular weight distribution suggested that PCl₃ acted as an internal donor, poisoning some active catalytic sites. Received: 2 April 1997/Revised: 6 June 1997/Accepted: 18 June 1997     

Liquid-phase hot-pressing and WC-particle reinforcement of SiC-Si composites

The sintering behaviour of SiC-Si and SiC-Si-WC composites hot-pressed via silicon liquid phase has been studied. The results show that the increase of silicon makes the sintered materials densify at lower temperature and the grain growth is restricted due to the effect of the liquid. The strength of SiC-25 vol.% Si samples is higher than the strength obtained for SiC-5 vol.% Si with the same hot-pressing conditions. The addition of WC particles improves relative densities and strengths of SiC-Si ceramics.     

Rheological and morphological properties of high‐density polyethylene and poly(ethylene–octene) blends

The rheological and morphological properties of blends based on high‐density polyethylene (HDPE) and a commercial ethylene–octene copolymer (EOC) produced by metallocene technology were investigated. The rheological properties were evaluated in steady and dynamic shear experiments at 190°C in shear rates ranging from 90 s^?1 to 1500 s^?1 and frequency range between 10^?1 rad/s and 10² rad/s, respectively. These blends presented a high level of homogeneity in the molten state and rheological behavior was generally intermediate to those of the pure components. Scanning electron microscopy (SEM) showed that the blends exhibit dispersed morphologies with EOC domains distributed homogeneously and with particle size inferior to 2 μm. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2240–2246, 2002