Effects of temperature, ammonium and glucose concentrations on yeast growth in a model wine system

In enology, alcoholic fermentation is a complex process involving several mechanisms. Slow and incomplete alcoholic fermentation is a chronic problem for the wine industry and factors leading to sluggish and stuck fermentations have been extensively studied and reviewed. The most studied cause of sluggish and stuck fermentation is the nitrogen content limitation. Nevertheless, other factors, such as temperature of fermentation and sugar concentration can affect the growth of yeasts. In this study we modelled the yeast growth‐cycle in wine model system as a function of temperature, sugar and ammonium concentrations; the individual effects and the interaction of these factors were analysed by means of a quadratic response surface methodology. Cell concentrations and weight loss were monitored in the whole wine fermentation process. The results of central composite design show that lower is the availability of nitrogen, higher is the cell growth rate; moreover, initial nitrogen concentration also influences survival time of Saccharomyces cerevisiae.     

A Novel Neurofilament Light Chain ELISA Validated in Patients with Alzheimer’s Disease,Frontotemporal Dementia,and Subjective Cognitive Decline,and the Evaluation of Candidate Proteins for Immunoassay Calibration

Neurofilament light chain (Nf-L) is a well-known biomarker for axonal damage; however, the corresponding circulating Nf-L analyte in cerebrospinal fluid (CSF) is poorly characterized. We therefore isolated new monoclonal antibodies against synthetic peptides, and these monoclonals were characterized for their specificity on brain-specific intermediate filament proteins. Two highly specific antibodies, ADx206 and ADx209, were analytically validated for CSF applications according to well-established criteria. Interestingly, using three different sources of purified Nf-L proteins, a significant impact on interpolated concentrations was observed. With a lower limit of analytical sensitivity of 100 pg/mL using bovine Nf-L as the calibrator, we were able to quantify the Nf-L analyte in each sample, and these Nf-L concentrations were highly correlated to the Uman diagnostics assay (Spearman rho = 0.97, p < 0.001). In the clinical diagnostic groups, the new Nf-L ELISA could discriminate patients with Alzheimer’s disease (AD, n = 20) from those with frontotemporal lobe dementia (FTD, n = 20) and control samples with subjective cognitive decline (SCD, n = 20). Henceforth, this novel Nf-L ELISA with well-defined specificity and epitopes can be used to enhance our understanding of harmonizing the use of Nf-L as a clinically relevant marker for neurodegeneration in CSF.     

On properties of multicast routing trees

In the last several years we witnessed the proliferation of multimedia applications on the Internet. One of the unavoidable techniques to support this type of communication is multicasting. However, even a decade after its initial proposal, multicast is still not widely deployed. One of the reasons is the lack of a solid business model. If the gain and the cost of multicast could be predicted, network operators might be encouraged to deploy multicast on a larger scale. In this paper we propose analytical expressions that could be used to estimate the gain of network‐layer multicast. We show that the theoretical model matches extensive simulation and Internet measurement results remarkably well. Furthermore, we examine the reliability of traceroute data and of traceroutes‐based conclusions. We investigate the node degree distributions in the Internet maps obtained from CAIDA and RIPE and we show the divergency of our results with those obtained by other researchers. We further focus on the analysis of multicast trees based on traceroute data. Only few results have been available on the node degree distribution of multicast routing trees which provided contradictory conclusions. Our results seem to indicate that the node degrees follow power laws only for a large number of multicast users. Copyright © 2005 John Wiley & Sons, Ltd.     

The comparative study of biocomposites based on hydrochar and chitosan-modified urea-formaldehyde resins

To provide new insight into the field of urea-formaldehyde (UF) adhesives science, in this work, for the first time, UF resin was modified with hydrochar of spent mushroom substrate (HCUF) and chitosan (CHUF) to investigate the effect of these bio-fillers on the hydrolytic and thermal stability of in situ prepared UF resins. The characterization of the modified UF biocomposites was performed using X-ray diffraction analysis (XRD), Fourier transforms infrared spectroscopy (FTIR), non-isothermal thermogravimetric analysis (TG), differential thermal gravimetry (DTG), and differential thermal analysis (DTA). Scanning electron micrographs (SEM) of the CHUF and HCUF biocomposites show a spherical structure that differs from each other because the surface of the CHUF biocomposite has pronounced pores that form a network structure. With its hydroxyl and amino groups, chitosan bonding to UF resin through hydrogen bonds, which is confirmed by FTIR analysis. The content of free FA in CHUF biocomposite is 0.06%, while that of HCUF is higher and amounts to 0.48%. The content of released FA in both modified UF biocomposites was similar (2.5% and 2.8% for CHUF and HCUF, respectively). The hydrolytic stability of CHUF is slightly higher compared to the HCUF biocomposite. Thermal analysis shows that the CHUF is thermally more stable because it starts to decompose at a slightly higher temperature than the HCUF biocomposite.     

Microwave assisted combustion synthesis in the system Ti–Si–C for the joining of SiC: Experimental and numerical simulation results

Microwaves at 2.45 GHz have been applied to ignite the combustion synthesis of compacted Ti–Si–C powders mixtures, having 1:1:1 atomic ratio, in order to join SiC-based components. A mixture of different refractory phases such as TiC and TiSi₂ were obtained. Depending on the synthesis conditions, no residual silicon in the joint was detected, suggesting the suitability of the here proposed experimental joining approach for nuclear plants and high temperature applications. A simplified model was developed with the aim of obtaining a deeper understanding of the here proposed rapid, almost pressure-less and localized heating joining method. Experimental and numerical simulation results demonstrate that joining of SiC can be rapidly obtained with minimization of heat affected zones in the SiC substrates. Maximum apparent shear strength values of the joints ranged from 9.9 to 45.1 MPa, depending on the process conditions.     

Teucrium plant species as natural sources of novel anticancer compounds: antiproliferative, proapoptotic and antioxidant properties

This study deals with total phenolic content, antiproliferative and proapoptotic activity of methanolic extracts from different Teucrium species and the effect on the prooxidant/antioxidant status in HCT-116 cells. The total phenolic content of the extracts was measured spectrophotometricaly and the obtained results ranged from 56.62 mg/g to 172.50 mg GA/g. The antiproliferative activity of methanolic extracts from different Teucrium species was determined using MTT cell viability assay, where IC(50) value was used as a parameter for cytotoxicity. The type of cell death was explored by fluorescence microscopy using the acridin orange/ethidium bromide method. MTT assay showed that all extracts significantly reduced cell viability in a dose-dependent manner, with very low IC(50) values. The highest content of phenolic compounds and the best cytotoxic activity on HCT-116 cells after 24 h of exposure was in T. chamaedrys extract, with IC(50) values of 5.48 × 10(-9) μg/mL. After 72 h, methanolic extract of T. arduini appeared to have the best cytotoxic activity on HCT-116, with IC(50) values of 0.37 μg/mL. Treatments caused typical apoptotic morphological changes in HCT-116 cells and showed a high percentage of apoptotic cells. The results of the presented research indicate that some Teucrium extracts are a very rich source of phenols, which may directly contribute to high antiproliferative and proapoptotic activity.     

Synthesis, structural and magnetic properties of nanostructured Ca0.9Gd0.1MnO3 obtained by modified glycine nitrate procedure (MGNP)

Ca_0.9Gd_0.1MnO₃ nanopowders with perovskite type crystal structure were synthesized by modified glycine nitrate procedure. Nanopowders were prepared by combining glycine with metal nitrates and/or metal acetates in their appropriate stoichiometric ratios. Modification of the procedure was performed by partial replacement of nitrates by acetates, in order to control the burn-up reaction. Obtained Ca_0.9Gd_0.1MnO₃ powders were calcinated in the temperature interval from 850 °C to 950 °C for 10 min. Properties such as phase evolution, lattice parameters, chemical composition and magnetic properties were monitored by DTA, X-ray diffraction, SEM/EDS and magnetic measurements. Magnetic measurements performed at the sample with the smallest crystallite size showed that a 10% of Gd³⁺ substituted Ca²⁺ ions changes antiferromagnetic properties of CaMnO₃ by the introduction of ferromagnetic interaction due to a double exchange between Mn³⁺ and Mn⁴⁺ ions. Presence of competing interactions and their randomness lead to a formation of a spin glass state below Neel temperature T_N = 110 K. From the high temperature magnetic susceptibility measurements effective magnetic moment of manganese ions is determined which lies between the values for Mn³⁺ and Mn⁴⁺ ions.     

Kinetics of lipid oxidation in the presence of cinnamic acid derivatives

The effects of seven (prenyl‐ and methoxy‐) derivatives of cinnamic acid (0.1 mM) on the kinetics of lipid (sunflower oil triacylglycerols, TGSO) bulk phase oxidation at 80 °C have been compared. Synthesis of prenyl cinnamic acid derivatives: 3‐prenyl‐4‐hydroxy‐cinnamic acid (PHC), 3,5‐diprenyl‐4‐hydroxy‐cinnamic acid (DPHC), 2,2‐di‐methyl‐6‐carboxy‐ethenyl‐2H‐benzopyran (DMCB), 2,2‐dimethyl‐6‐carboxy‐ethenyl‐8‐prenyl‐2H‐benzopyran (DCEPB) present in Brazilian propolis has been performed. The monoprenyl derivative (PHC) has been found to exert a higher antioxidant activity as compared to the diprenyl derivative (DPHC). However, cinnamic acid derivatives DMCB and DCEPB have caused no change in the kinetics of TGSO oxidation. The results obtained have been compared with those on related compounds containing a cinnamic acid moiety as a structural feature, such as 4‐hydroxy‐cinnamic (p‐coumaric), 3‐methoxy‐4‐hydroxy‐cinnamic (ferulic) and 3,5‐dimethoxy‐4‐hydroxy‐cinnamic (sinapic) acids, as well as with data on butylated hydroxytoluene (BHT) and α‐tocopherol (αToc). PHC has shown a stronger antioxidant efficiency than BHT, p‐coumaric and ferulic acid, but a weaker antioxidant efficiency than α‐Toc and sinapic acid. The observed antioxidant effect of DPHC was stronger than that of p‐coumaric and ferulic acids and weaker than that of α‐Toc, BHT and sinapic acid.     

Multiscale approach to the morphology,structure, and segmental dynamics of complex degradable aliphatic polyurethanes

A multiscale approach spanning from the segmental (subnanometer) up to micrometer level was applied for detailed study of the self‐assembly of aliphatic block polyurethane (PU) elastomers. To understand the principles of the self‐organization of hard and soft segments in the complex multi‐component systems, several two‐component model PU samples, that is, the products of 1,6‐diisocyanatohexane (HDI) with three diols differing in the length and constitution were also prepared, characterized, and investigated: (i) polycarbonate‐based macrodiol (MD), (ii) biodegradable oligomeric diol (DL‐L; product of butane‐1,4‐diol and D,L‐lactide), and (iii) butane‐1,4‐diol (BD). The study (particularly ¹³C‐¹H PILGRIM NMR spectra) reveals complex internal organization and interesting (application appealing) behavior of multi‐component PUs. Hard segments (HDI+BD products) feature self‐assembled and significantly folded chain conformations with interdomain spacing 15–22 nm (small‐angle X‐ray scattering analysis). The small domains are hierarchically assembled in various structural formations of µm size (spherulites) depending on PU composition, as detected by transmission electron microscopy and atomic force microscopy. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41590.