Spray Drying of Green Corn Pulp

Maize (Zea mays) is a cereal grown in Brazil, and its availability is limited to the harvest season. An alternative processing route is based on the production of green corn powder, which has a longer shelf-life and increased versatility. This study aimed to evaluate the influence of drying conditions on the physical characteristics, size, and morphology of green corn powder. Drying experiments were performed on a spray dryer according to a central composite rotational design to evaluate inlet air temperature, feed flow rate, and pulp concentration. The yield of dried pulp corn had an average value of 36.19%. The following mean values for the physical properties of the powder were measured: solubility of 94.37 g/100 g, wettability of 128.05 seconds, moisture content of 1.97%, water activity of 0.13, density of 0.79 g/mL, and a particle diameter of 31.02 µm. The powder was also yellow with less intensity, and the particle surface was smooth at higher temperatures and had a tendency to form agglomerates. The estimated optimal conditions for spray drying were 48% (w/w) pulp concentration, 172°C inlet air temperature, and feed flow rate of 0.56 L/h.     

Treatment of Chronic Kidney Disease with Extracellular Vesicles from Mesenchymal Stem Cells and CD133+ Expanded Cells: A Comparative Preclinical Analysis

Chronic kidney disease (CKD) is characterized by structural abnormalities and the progressive loss of kidney function. Extracellular vesicles (EVs) from human umbilical cord tissue (hUCT)-derived mesenchymal stem cells (MSCs) and expanded human umbilical cord blood (hUCB)-derived CD133⁺ cells (eCD133⁺) maintain the characteristics of the parent cells, providing a new form of cell-free treatment. We evaluated the effects of EVs from hUCT-derived MSCs and hUCB-derived CD133⁺ cells on rats with CDK induced by an adenine-enriched diet. EVs were isolated by ultracentrifugation and characterized by nanoparticle tracking analysis (NTA) and electron microscopy. The animals were randomized and divided into the MSC-EV group, eEPC-EV group and control group. Infusions occurred on the seventh and 14th days after CKD induction. Evaluations of kidney function were carried out by biochemical and histological analyses. Intense labeling of the α-SMA protein was observed when comparing the control with MSC-EVs. In both groups treated with EVs, a significant increase in serum albumin was observed, and the increase in cystatin C was inhibited. The results indicated improvements in renal function in CKD, demonstrating the therapeutic potential of EVs derived from MSCs and eCD133⁺ cells and suggesting the possibility that in the future, more than one type of EV will be used concurrently.     

Characterization of novel thermoresponsive poly(butylene adipate-co-terephthalate)/poly(N-isopropylacrylamide) electrospun fibers

Polymer Bulletin - In this work, electrospun fibers of poly(butylene adipate-co-terephthalate) (PBAT) and poly(N-isopropylacrylamide) (PNIPAAm) blends, PBAT/PNIPAAm, with different mass ratios,...     

Polymerization shrinkage and porosity profile of dual cure dental resin cements with different adhesion to dentin mechanisms

This research aims to probe the porosity profile and polymerization shrinkage of two different dual cure resin cements with different dentin bonding systems. The self‐adhesive resin cement RelyX U200 (named RU) and the conventional Allcem Core (named AC) were analyzed by x‐ray microtomography (μCT) and Scanning Electron Microscopy (SEM). Each cement was divided into two groups (n = 5): dual‐cured (RUD and ACD) and self‐cured (RUC and ACC). μCT demonstrated that the method of polymerization does not influence the porosity profile but the polymerization shrinkage. Fewer concentration of pores was observed for the conventional resin cement (AC), independently the method used for curing the sample. In addition, SEM showed that AC has more uniform surface and smaller particle size. The method of polymerization influenced the polymerization shrinkage, since no contraction for both RUC and ACC was observed, in contrast with results from dual‐cured samples. For RUD and ACD the polymerization shrinkage was greater in the lower third of the sample and minor in the upper third. This mechanical behavior is attributed to the polymerization toward the light. µCT showed to be a reliable technique to probe porosity and contraction due to polymerization of dental cements.     

Combined Effects of Electron-Beam Irradiation and Storage Time on the Chemical and Antioxidant Parameters of Wild Macrolepiota procera Dried Samples

Mushrooms are very perishable foods due to their high susceptibility to moisture loss, changes in color and texture, or microbiological spoilage. Drying is considered as the most appropriate method to prevent these alterations, but it has some limitations, such as shrinkage, enzymatic and non-enzymatic browning reactions, and oxidation of lipids and vitamins. According to previous studies, irradiation might effectively attenuate the undesirable changes caused by drying process, ensuring also higher shelf-life of mushrooms and their decontamination. Electron-beam irradiation presents some technological advantages, since it allows higher dose rates and the possibility to be used in most foods/or thin products in a short period. Herein, the combined effects of electron-beam irradiation (0, 0.5, 1 and 6 kGy) and storage time (0, 6 and 12 months) were evaluated by measuring changes in nutritional parameters, namely, free sugars, tocopherols, fatty acids and antioxidant activity. As indicated by linear discriminant analysis, storage time had a higher effect on all the evaluated parameters, except fatty acids, which suffer significant changes with both factors. Overall, the obtained results indicate that electron-beam irradiation might be considered as a suitable technique, allowing long-lasting conservation periods while reducing changes induced by drying treatment.     

Effects of different particle deposition parameters on adhesion of resin cement to zirconium dioxide and phase transformation

This study evaluated the effect of air-abrasion parameters such as particle size, distance, and time on adhesion of resin cement to zirconium dioxide (Y-TZP) and t→m phase transformation. Y-TZP blocks (N = 80) (In-Ceram YZ, Vita) (4 mm^3?×?4 mm^3?×?3 mm³) were assigned into eight groups (n = 10): air-abrasion with 30 μm (CoJet Sand, S30) and 110 μm (Rocatec-Plus, S110) silica-coated alumina particles, applied for either for 10–20 s (T = time), from a distance of 10–20 mm (D = distance), composing the following groups: S₃₀T₁₀D₁₀, S₃₀T₁₀D₂₀, S₃₀T₂₀D₁₀, S₃₀T₂₀D₂₀, S₁₁₀T₁₀D₁₀, S₁₁₀T₁₀D₂₀, S₁₁₀T₂₀D₁₀, and S₁₁₀T₂₀D₂₀. Resin composite (RelyX ARC) was bonded to Y-TZP blocks in polyethylene molds. The specimens were aged (10,000 thermal cycles and water storage for 90 days) prior to shear bond test. Failure types were analyzed under stereomicroscope and SEM, and phase transformation was calculated. Data (MPa) were analyzed using 3-way ANOVA and Tukey’s tests. Air-abrasion with 110 μm silica particles (10.96) presented significantly higher bond strength (p = 0.0149) compared to 30 μm (8.96). Time (p = 0.403) and distance (p = 0.179) parameters did not affect the results significantly. Air-abrasion with 110 μm particles (12.3) promoted higher bond strength than that of 30 μm (6.4) when applied for 10 s from a distance of 10 mm (Tukey’s). Failure types were predominantly adhesive. Phase transformation ranged between 30.3 and 35.9% for 30 μm particles and 23.8–43.7% for 110 μm particles. While the size of silica-coated alumina particles were more relevant parameter for resin cement adhesion to Y-TZP, time (up to 20 s) and distance (up to 20 mm) appear to be less pertinent.     

Analysis of high voltage step-up nonisolated DC–DC boost converters

A high voltage step-up nonisolated DC–DC converter based on coupled inductors suitable to photovoltaic (PV) systems applications is proposed in this paper. Considering that numerous approaches exist to extend the voltage conversion ratio of DC–DC converters that do not use transformers, a detailed comparison is also presented among the proposed converter and other popular topologies such as the conventional boost converter and the quadratic boost converter. The qualitative analysis of the coupled-inductor-based topology is developed so that a design procedure can be obtained, from which an experimental prototype is implemented to validate the theoretical assumptions.     

Copper‐Free Clickable Coatings

The copper‐catalyzed azide–alkyne 1,3‐dipolar cycloaddition (CuAAC) is extensively used for the functionalization of well‐defined polymeric materials. However, the necessity for copper, which is inherently toxic, limits the potential applications of these materials in the area of biology and biomedicine. Therefore, the first entirely copper‐free procedure for the synthesis of clickable coatings for the immobilization of functional molecules is reported. In the first step, azide‐functional coatings are prepared by thermal crosslinking of side‐chain azide‐functional polymers and dialkyne linkers. In a second step, three copper‐free click reactions (i.e., the Staudinger ligation, the dibenzocyclooctyne‐based strain‐promoted azide–alkyne [3+2] cycloaddition, and the methyl‐oxanorbornadiene‐based tandem cycloaddition?retro‐Diels?Alder (crDA) reaction) are used to functionalize the azide‐containing surfaces with fluorescent probes, allowing qualitative comparison with the traditional CuAAC.     

Impact of growth rate on the quality of ZNS-MQW InGaAsP/InP laser structures grown by LP-MOVPE

We investigated the influence of the growth rate on the quality of zero-net-strained InGaAsP/InGaAsP/InP multiquantum well structures for 1.55 μm emission grown by low pressure metalorganic vapor phase epitaxy. The samples consisted of fixed compressive strained wells (ɛ=+1%) and tensile strained barriers (ɛ=−0.5%) grown with different quaternary bandgap wavelengths (λ_B=1.1–1.4 μm). Using higher growth rates, we obtained for the first time high quality zero net strained multi quantum well structures, regardless having constant group V composition in the well and barriers. The samples were analyzed by x-ray diffraction, photoluminescence and atomic force microscopy techniques. The amplitude of surface modulation roughness along [011] direction decreased from 20 nm to 0.53 nm with increasing growth rate and/or quaternary compositions grown outside the miscibility gap. A new deep PL broad emission band strongly correlated with the onset of wavy layer growth is also reported. Broad area and ridge waveguide lasers with 10 wells exhibited low losses (34 cm⁻¹) and low threshold current densities at infinite cavity length (1020 A·cm⁻² and 1190 A·cm⁻², respectively).