Aromatic products of 340 °C supercritical-toluene extraction of two Turkish lignites: an n.m.r. study

Fractions of Elbistan and Seyitomer (Turkish) lignites, extracted with supercritical toluene at 340 °C and 8 MPa, have been separated by solvent extraction and silica-gel chromatography. Analyses by n.m.r. and i.r. spectroscopies and other methods have been combined in structural-analysis schemes to yield information about the average molecule in aromatic extracts. Carbon aromaticities, f_a, derived from 22.63 MHz ¹H-decoupled pulse Fourier-transform (PFT) ¹³C-n.m.r. are more widely spread for Elbistan (0.34–0.56) than for Seyitomer (0.40–0.43), and are lower than for supercritical-gas (SCG) products from bituminous coals. ¹³C-n.m.r. also reveals the presence of aromatic ether-O in polar fractions. Narrow aromatic signals in 100 MHz ¹H-n.m.r. spectra suggest the presence of single-aromatic-ring average structures. In the hexane-soluble aromatics, 27% (Elbistan) and 29% (Seyitomer) of the available sites are substituted by alkyI groups, some of which are at least eight carbon atoms long; the hexane-soluble polar and asphaltene/asphaltol fractions contain fewer such groups.     

An investigation of some Schiff bases as corrosion inhibitors for austenitic chromium–nickel steel in H2SO4

The corrosion inhibition of austenitic chromium–nickel steel by two Schiff bases, N-(1-toluidine)salicylaldimine and N-(2-hydroxyphenyl)salicylaldimine, was investigated in sulphuric acid medium. The effect of concentration and temperature on inhibition properties was determined. It was found that when the concentrations of inhibitor were increased the inhibition efficiencies () and surface coverage () increased. Some thermodynamic parameters such as free energy of adsorption, G _ads, and enthalpy, H, were determined for the Schiff bases. Experimental results agree with the Temkin isotherm for N-(1-toluidine)salicylaldimine, but the Langmuir isotherm is more appropriate for N-(2-hydroxyphenyl)salicylaldimine.     

高炉用氮化硅结合碳化硅制品化学分析方法的研究

确定了高氧化铝含量（０．５％－２０％）的高炉用氮化硅结合碳化硅制品中Ｓｉ３Ｎ４、ＳｉＣ、ｆＳｉ、ＳｉＯ２、Ｆｅ２Ｏ３、Ａｌ２Ｏ３六种化学成分的化学分析方法试验条件．并按条件试验选择了分析方法，进行了精密度、准确度和实际工作的考核，证明了本分析方法可靠、切实可行，能满足科研工作和生产的要求。     

Structure Development of NiO–YSZ Oxide Mixtures in Simulated Citrate–Nitrate Combustion Synthesis

Yttria-stabilized zirconia (NiO/YSZ) composites were prepared by the modified citrate–nitrate combustion synthesis. The citrate–nitrate combustion proceeded through several consecutive steps. Evolution of structure in the system and its changes were followed up by thermogravimetry-differential scanning calorimetry, X-ray powder diffraction, extended X-ray absorption fine structure, and high resolution transmission electron microscopy analyses of intermediate products prepared at distinct temperatures that correspond to different stages of the combustion process. It was shown that the crystalline structure developed gradually, first with crystallization of nano-sized NiO particles (400°–700°C), which was followed by crystallization of YSZ (800°–900°C). The final composite material after heat treatment at 1100°C comprised of nano-crystals with an average size of 6.5±2 nm.     

Kinetics of the decomposition of total aliphatic waxes in olive oil during deodorization

Changes in the content of aliphatic waxes during industrial deodorization and/or physical refining of bleached olive oil were studied in an experimental discontinuous pilot plant of 250 kg deodorizer using nitrogen as stripping gas in place of steam. The kinetic constants for the decomposition of waxes during the deodorization process were determined. The reaction orders studied are zero (or can be considered zero) within the working interval. The values of rate constants, activation energy, frequency factor, increment of activation Gibbs free energy, activation enthalpy, and activation entropy are established.     

Preparation and characterization of novel poly(glycidyl methacrylate) beads carrying amidoxime groups

Poly(glycidyl methacrylate) (PGMA) beads with an average size of 350 μm were synthesized by suspension polymerization technique. The PGMA beads were first modified with iminodiacetonitrile (IDAN). Then, the IDAN‐modified beads were subsequently modified by hydroxylamine. The IDAN modification and the conversion of the nitrile groups to amidoxime were followed by FT‐IR spectroscopy. The surface morphology and thermal behavior of the PGMA and its modified forms were also characterized by scanning electron microscopy and thermogravimetric analysis techniques, further confirming modification and amidoximation. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

可控特征点对以及RANSAC的监视系统外参估算方法

为了提高基于机器视觉的监控系统的精度,立体视觉信息作为一种鲁棒性很高的参数被引入监控算法中.立体视觉信息的引入使得外参求解成为影响监控结果的一个重要环节.现存的应用于监视系统的外参自动估算方法均采用立体视觉中外参求解的方法.这些方法普遍存在特征点的数目完全由场景决定特点.为了解决在大部分监视系统应用的场景中,因为背景较为空旷、基线较长同时相机对之间的旋转量较大,由场景提供的特征点数量非常有限,导致计算结果并不理想这一问题,提出了一种基于视频序列的RANSAC外参求解方法.该方法不仅利用RANSAC算法有效的剔除外点,而且根据可控特征点对的动态性,利用时间上的积累获得了充足的位置可控、数量可控的可控特征点对,并据此得到精度较高的外参结果.根据实验,该方法可以将三维重建误差降低近50%.     

Chlorophyll adsorption on acid-activated clay

An acid-activated clay (Çanakkale montmorillonite from Turkey) was used to adsorb chlorophyll from hexane solutions. The phenomenon seems to be mainly driven by the interaction of chlorophyll with acid sites. The adsorption of chlorophyll on Brönsted acid sites was indicated by a characteristic infrared band for the -OH group at 3671 cm^?1. The variations in the structure of clay mineral and chlorophyll during adsorption have been examined by differential thermal analysis, thermogravimetry and infrared spectroscopy of the activated clay before and after adsorption of chlorophyll. Oxidation of adsorbed chlorophyll was completed at quite a high temperature.     

Characterization and modeling of diffusion process for mass transport through the Tournemire argillites (Aveyron, France)

Argillites are one of the geological formations studied by IRSN for their confining properties for isolation of radioactive wastes. One of the main objectives is the study of water transport through rocks with very low water content and very low hydraulic conductivity by modeling of natural tracer profiles. This paper presents the protocol developed for and applied to the acquisition of data for chloride content in interstitial water of the Toarcian argillites at the Tournemire site (Southern France). This protocol is based on laboratory diffusion experiments and on modeling. Experimental data obtained during the transient and steady-state parts of diffusion experiments enable, respectively, the assessment of the diffusion coefficient and the determination of Cl concentration in pore water. Using this protocol, profiles with depth for both of these data sets have been acquired along the geological sequence. Taking into account the present knowledge of the geological and hydrogeological history of the Tournemire massif, a conceptual model granting the main role for mass transport to diffusion has been proposed. According to this conceptual model, a one-dimensional numerical model was built for simulating the mass transport of chloride through the sedimentary column, over 53 Ma. The good agreement between experimental data and calculated values for both diffusion coefficients and concentrations of chloride confirms that diffusion is likely the main process for mass transport in the massif. This model was also tested with the deuterium content of interstitial water, applying variable concentrations at the aquifer system boundaries for reflecting the thermal dependency of isotopic composition in precipitation. These simulations also reveal the likely important role of heterogeneities, such as fractures, in the variability of tracer concentrations with regards to a simple diffusion profile.     

Graphene oxide-containing isocyanate-based polyimide foams: Enhanced thermal stability and flame retardancy

Isocyanate-based graphene oxide-containing polyimide foams were synthesized by a semi-prepolymer method. In this method, while the first solution containing pre-polymer was derived from pyromellitic dianhydride and excess polymethylene polyphenylene isocyanate (PM200), the second solution contains dianhydride derivatives, water, catalysts, surfactants, and graphene oxide. PIFs were prepared with 0%, 0.25%, 0.50%, 0.75%, and 1% graphene oxide by weight, respectively. PIFs exhibited a minimum side reaction and urea generation was not seen for all PIFs instead of imide bonding. The addition of graphene oxide (GO) leads to a more close-packed structure. Therefore, crosslinking density and thermal stability of graphene oxide-containing polyimide foams increased. Upon the addition of 1% GO, almost seven times higher compression strength was obtained compared to neat PIFs. Also, LOI values supported the theory that thermally stable and flame retardant PIFs can be synthesized via the isocyanate-based process with GO.