Increased concentrations of octachlorodibenzo-p-dioxin in cases with breast cancer--results from a case-control study

Organochlorines are persistent and highly lipophilic environmental contaminants which bioaccumulate in the food chain. Some of these chemicals, 2,2-bis(p-chlorophenyl)-1,1,1-trichloroethane (DDT) and polychlorinated biphenyls (PCBs), have been suggested to be of significance in the aetiology of breast cancer. 2,3,7,8-Tetrachlorodibenzo-p-dioxin (TCDD) is an anti-oestrogen in animal studies and should be thus lower the risk of breast cancer. The other isomers of polychlorinated dibenzo-p-dioxins (PCDDs) or the chemically related polychlorinated dibenzofurans (PCDFs) have not been tested regarding carcinogenesis of the breast. The purpose of this study was to investigate whether PCDDs or PCDFs influence the risk for breast cancer. Consecutive patients who underwent surgery for a breast disease between 1993 and 1995 were recruited for the study. Cases were 22 patients with infiltrative breast cancer and controls were 19 patients operated for a benign breast disease during the same time period. Approximately 10 g of breast tissue free from tumour was taken from the specimen and frozen until analysis. Fat was extracted, cleaned and analysed with a high-resolution gas chromatograph coupled to a high-resolution mass spectrometer. Median concentrations of octachlorinated dibenzo-p-dioxin (OCDD) were 598 (170-14,880) and 396 (103-1,847) pg/g lipid in the cases and in the controls, respectively. In a multivariate logistic regression analysis controlling for other risk factors for breast cancer increased odds ratio (OR) was obtained for OCDD: 401-1000 pg/g lipid yielded OR 3.8, 95% confidence interval (CI) 0.4-39, > 1000 pg/g lipid gave OR 5.2, CI 0.4-72. When the lipid OCDD variable was examined as a continuous risk factor there was a 1.09 (9%), CI 0.95-1.25, increase in the adjusted OR for breast cancer per 100 unit (pg/g lipid) increase in OCDD. No differences were found between cases and controls for the other six tested PCDDs. Mean concentration of TCDD was in the cases 3.6 (1.0-7.9) and in the controls 3.3 (1.1-6.3) pg/g lipid. For PCDFs no significant differences were found between cases and controls. The results were not changed if oestrogen or progesterone receptor status, S-phase fraction and DNA ploidy were considered. Breast tissue concentration of OCDD was increased in cancer patients, whereas the concentrations of other PCDDs and PCDFs were equal in cases and controls.     

Biochemical identification of transmembrane segments of the Ca(2+)-ATPase of sarcoplasmic reticulum

The transmembrane segments of sarcoplasmic reticulum Ca(2+)-ATPase were determined by trypsinization of cytoplasmic side-out intact sarcoplasmic reticulum vesicles. The membrane portion of tryptic digest comprising the transmembrane fragments, joined by the intravesicular segments, was separated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis after labeling with fluorescein 5-maleimide in the presence of sodium dodecyl sulfate. In this way, seven fluorescent bands of tryptic fragments below 11 kDa were observed which were derived from 4 pairs of membrane spanning segments and one hydrophobic sequence at the C-terminal end. Two peptides of 10.8 and 10.6 kDa had the identical N-terminal sequence beginning at Glu826, representing the transmembrane segments M7 and M8 and their connecting loop. A band at 8.1 kDa contained one peptide beginning at Tyr36 (M1/loop/M2). A 7.7-kDa peptide starting at Leu253 (M3/loop/M4) and a 7.3-kDa peptide beginning at Ala752 (M5/loop/M6) were also observed. A band at 6.7 kDa contained two peptides, one beginning at Ser48 (M1/loop/M2) and another beginning at Tyr763 (M5/loop/M6). In addition, a 4-kDa peptide beginning at Met925 was observed. The size of this peptide did not allow for a complete pair of transmembrane segments, but this peptide could have been derived from trypsinolysis between the last pair of membrane spanning segments. These data therefore provide biochemical evidence for at least 8 transmembrane segments and perhaps two more at the C-terminal end of the enzyme.     

Mixed Mode VLSI Implementation of a Neural Associative Memory

A mixed mode digital/analog special purpose VLSI hardware implementation of an associative memory with neural architecture is presented. The memory concept is based on a matrix architecture with binary storage elements holding the connection weights. To enhance the processing speed analog circuit techniques are applied to implement the algorithm for the association. To keep the memory density as high as possible two design strategies are considered. First, the number of transistors per storage element is kept to a minimum. In this paper a circuit technique that uses a single 6-transistor cell for weight storage and analog signal processing is proposed. Second, the device precision has been chosen to a moderate level to save area as much as possible. Since device mismatch limits the performance of analog circuits, the impact of device precision on the circuit performance is explicitly discussed. It is shown that the device precision limits the number of rows activated in parallel. Since the input vector as well as the output vector are considered to be sparsely coded it is concluded, that even for large matrices the proposed circuit technique is appropriate and ultra large scale integration with a large number of connection weights is feasible.     

Simulation of the submerged energy nozzle-mold water model system using laser-optical and computational fluid dynamics methods

The present work describes quantitative digital particle image velocimetry measurements of a full-scale water model of a thin slab mold. Different casting speeds and two submerged entry nozzles with one and two outlet ports have been investigated. The flow pattern of the single-port nozzle shows a counterclockwise-rotating double vortex that is nearly steady-state but leads to high stationary surface waves. The flow jets out of the two-port nozzle oscillate and produce a transient flow pattern with low wave amplitudes. The amplitudes for the one-port nozzle show a linear variation with the volumetric flow rate. The experimental results lead to a good interpretation of the flow phenomena and are used to validate steady-state numerical simulations with the commercial program, CFX, on the basis of the Reynolds equations. To describe anisotropic turbulence effects, the Reynolds stress model (RSM) is used for the flat single-port nozzle and the standard k-ɛ model for the mold flow. The calculated mean velocities and wave amplitudes, predicted from pressure distribution at the water surface, are generally in the consensus of the experimental data. An erratum to this article is available at .     

Utilities in the sky?: Comparison of space-based and terrestrial solar power systems

Could huge arrays of space-based solar power systems one day supply utility scale electricity to the electric power grid on earth? How realistic a possibility is this option for alternative energy supply at the moment? Finley R. Shapiro, USA compares space-based and terrestrial solar power systems.