CO2 emissions of Turkish manufacturing industry: A decomposition analysis

In this study, CO₂ emissions of Turkish manufacturing industry are calculated by using the fuel consumption data at ISIC revision 2, four digit level. Study covers 57 industries, for the 1995–2001 period. Log Mean Divisia Index (LMDI) method is used to decompose the changes in the CO₂ emissions of manufacturing industry into five components; changes in activity, activity structure, sectoral energy intensity, sectoral energy mix and emission factors. Mainly, it is found that changes in total industrial activity and energy intensity are the primary factors determining the changes in CO₂ emissions during the study period. It is also indicated that among the fuels used, coal is the main determining factor and among the sectors, 3710 (iron and steel basic industries) is the dirtiest sector dominating the industrial CO₂ emissions in the Turkish manufacturing industry.     

Influence of pH on recombinant human growth hormone production by Pichia pastoris

BACKGROUND: Effect of pH on recombinant human growth hormone (rhGH) production by Pichia pastoris hGH‐Mut⁺ was investigated at pH = 4.2, 5.0, 5.5, and 6.0. RESULTS: The highest cell concentration was obtained at pH = 6.0 with 53 g L^?1, while the highest rhGH concentration was attained at pH = 5.0 as 0.27 g L^?1. Total protease secretion increased with increase in pH and with the cultivation time. Oxygen uptake rate increased with increasing pH up to pH = 6.0, having the maximum value, 37 mmol m^?3 s^?1, at pH = 5.5. K_La values were similar at all the conditions, having a maximum value of 0.14 s^?1 at pH = 5.0. Taking the final rhGH concentration into account, the most favourable pH was 5.0; where AOX1 expression level showed a similar trend to AOX activity profiles, having the highest value of 9.4 × 10¹⁰ copy mg^?1 CDW at t = 15 h; in parallel to AOX1 expression profile, hGH expression level increased until t = 15 h, with the highest value of 4.0 × 10¹⁰ copy mg^?1 CDW, where a sharp increase in rhGH concentration was obtained. The expression levels of pep4, prb1 and prc1 genes, responsible from the production of proteinase A, proteinase B and, carboxypeptidase Y, were parallel to each other. CONCLUSION: Since it was shown that pH is a crucial operating parameter in fermentation processes using P. pastoris, keeping pH constant at its determined optimum value, pH = 5.0, during the bioprocess is vital in terms of recombinant protein production. Copyright © 2010 Society of Chemical Industry     

Anaerobic digestion of Aegean olive mill effluents with and without pretreatment

BACKGROUND: Olive oil production is an important economical activity in the Aegean region of Turkey. However, the effluents of the olive oil producing mills with their high organic loads and toxic compounds are causing serious environmental problems. The anaerobic biological treatment of olive mill wastewater (OMWW) using the treatment plants of the regional industries could be a method of choice and within the scope of this study floccular and granular sludges were investigated in batch mode for their success in the treatment of OMWW while producing biogas. The major limitation of this treatment is the inhibition of methanogenic bacteria by the phenolic compounds in OMWW. Thus an integrated solution was suggested in which a pre‐treatment step (dephenolization) was also introduced before biological step. RESULTS: The effluents of 27 olive mills out of 47 were found to have total phenolics (TP) less than 3 g L^?1 and could be treated anaerobically after simple dilution. The biogas production for the untreated OMWW was higher for floccular sludge than for the granular sludge (68.5 mL and 45.7 mL respectively). Combined pre‐treatment experiments, first coagulation with polyaluminum chloride, followed by flocculation with cationic polyelectrolyte and finally Fenton's oxidation, could remove 80% of TP and 95% of the total suspended solids. CONCLUSION: OMWW having TP values less than 3 g L^?1 can be treated anaerobically using floccular sludge after simple dilution and biogas can be produced. For OMWW samples having higher TP values pre‐treatment is necessary and the pre‐treatment given in this study may be used effectively. Copyright © 2010 Society of Chemical Industry     

Structural Analysis of Pyrolysis Products From Pyrolysis of Hazelnut (Corylus Avellana L.) Bagasse

Fixed-bed pyrolysis biooils of hazelnut (Corylus Avellana L.) bagasse have been identified for their structures. The condensed biooils were analyzed for their properties as fuels and compared with petroleum-derived products. The biooil was analyzed by Fourier Transform infrared spectroscopy (FTIR) and ¹H-NMR spectra. The biooils were fractionated into pentane solubles and insolubles. Pentane solubles were then solvent fractionated into pentane, toluene and methanol subfractions by fractionated column chromatograpy. The aliphatic subfractions of the biooils were then analyzed by capillary column gas-liquid chromatography (GC). In addition, the physical properties, higher heating value and elemental analysis of the biooil were determined. The empirical formula of biooil that has a heating value of 34.57 MJ/kg was established as CH_1.45O_0.33N_0.127. Chromatographic and spectroscopic studies on the biooil showed that the oil obtained from hazelnut bagasse could be used as a renewable fuel and chemical feedstock.     

Organic Carbon and Trace Metal Distribution in the Gökçesu Shale: Eocene Basin,Bolu-Turkey

Abstract

Samples collected from the bituminous shales in the Eocene Tokmaklar formation are the material of this study. Distribution of organic material and trace metals in the shale samples and their concentration levels and correlations were evaluated. Organic carbon content of the bituminous shales is between 0.59 and 15.89% (averaging as 4.86%). The type of organic material is 100% amorphous material (kerogen type is Type I and Type II) and it has a potential to produce oil. Trace metal enrichment levels were determined on the basis of average shale concentration in the earth crust. These levels are divided into two groups. Mo (1.98–2.64), Cu (1.27), As (1.59–8.83), and Sr (2.58–2.75) in bituminous rocks show enrichment character while Pb, Zn, Ba, and Co metals do not display any enrichment. Moreover, comparison with the average values of these metals in seawater and living organisms yield enrichment coefficients of 86.17–386.000 (with respect to seawater) and 4.59–1,723.5 (with respect to living organisms).     

Mechanical and microstructural properties of low-carbon steel-plate-reinforced gray cast iron

In the present experimental study, strengthening of gray cast iron by reinforcing with steel plates was investigated in the as-cast and normalized conditions. Normalizing heat treatments were applied to the specimens at temperatures of 800 °C and 850 °C. Three-point bend specimens were manufactured from gray cast iron and also from gray cast iron with reinforced steel plates. Flexural strengths of the steel-plate-reinforced cast iron were calculated for four distinct volume fractions (V_r = 0.04, 0.08, 0.12, and 0.16). The current study shows that the steel-plate-reinforced gray cast iron has higher flexural strength and flexural modulus than the cast iron without reinforcement. The flexural strength considerably increases with slight increase in normalization temperature. Optical and scanning electron microscopy analyses were used to examine flake morphology and microstructures of gray cast iron and steel-plate-reinforced gray cast iron. It is noted that carbon diffuses from the gray cast iron to the steel plates. A transition region containing partially dissolved graphite and having high hardness was observed due to the carbon diffusion.     

Seismic microzonation of the historic peninsula of İstanbul

In this study, the geological and geotechnical conditions of old Istanbul (Fatih and Eminönü provinces) were investigated in detail and a seismic microzonation study was undertaken for this historical peninsula, which is the site of many ancient structures. Dynamic site response, liquefaction potential and slope stability analyses were carried out, based on field and laboratory tests and earthquake time histories computed with respect to probabilities of exceedance of 10 and 40% in 50 years. The output data obtained from the analyses were evaluated by GIS techniques, and ground shaking, liquefaction susceptibility and landslide hazard maps were prepared.     

High-mobility pentacene phototransistor with nanostructured SiO2 gate dielectric synthesized by sol-gel method

We have fabricated a pentacene based phototransistor by employing a modified nanostructured SiO₂ gate dielectric. The photosensing properties of the pentacene thin film transistor fabricated on n-Si substrate with nanostructured SiO₂ as gate dielectric have been investigated. The photocurrent of the transistor increases with an increase in illumination intensity. This suggests that the pentacene thin film transistor behaves as a phototransistor with p-channel characteristics. The photosensitivity and responsivity values of the transistor are 630.4 and 0.10 A/W, respectively at the off state under AM 1.5 light illumination. The field effect mobility of the pentacene phototransistor was also found to be 2.96 cm²/Vs. The nanostructured surface of the gate possibly is the cause of the high-mobility value of the phototransistor due to light scattering from the increased surface area.     

Antioxidant activity and polyphenol content of Turkish thyme (Thymus vulgaris) monitored by liquid chromatography and tandem mass spectrometry

Like tea, the leaves of Turkish thyme (Thymus vulgaris) can be boiled in water to produce an extract. This is widely used as syrup for the treatment of coughs and bronchitis at alternative medicine clinics in many parts of the world. In the current study, we assessed the phenolic content and antioxidant activity of thyme. The antioxidant activities of both ethanol and aqueous extracts of thyme were determined using various in vitro methods. The total phenolic and total flavonoid contents were determined to be a gallic acid equivalent and a quercetin equivalent, respectively. Finally, the quantities of the phenolic compounds were detected using high-performance liquid chromatography and tandem mass spectrometry. The total phenolic compounds in the aqueous extract and ethanol extracts of Turkish thyme were 256.0 μg gallic acid equivalent/mg dried extract and 158.0 μg gallic acid equivalent/mg dried extract, respectively. Conversely, the total flavonoid compounds in both extracts were 44.2 μg and 36.6 μg quercetin equivalent/mg dried extract, respectively. For the first time, we determined phenolic contents and investigated the antioxidant potential of thyme. The results indicate that Turkish thyme is a good dietary source with phenolic properties.     

A comparative prediction for tensile properties of ternary blended open-end rotor yarns using regression and neural network models

This study focused on predicting tensile properties of PES/CV/PAN blended Open-End Rotor yarns. The effective factors were fiber blend ratios (six stages from 0 to 100%), linear density (three count levels), mixing method (carding machine and drawframe), and number of passages in drawframe (one and two times) as production parameters. We performed a stepwise multiple linear regression (MLR) analysis and established an artificial neural network (ANN) model that trained with backpropagation rule as Levenberg–Marquardt. Then, we conducted a comparative analysis for both models in terms of prediction performance. As a result, ANN has given a slightly better prediction values than MLR for breaking strength but significantly better prediction values for breaking elongation.