The Distribution of Antimony and Arsenic in Waters of the Dúbrava Abandoned Mine Site, Slovak Republic

The abandoned Dúbrava Mine, situated in the northern part of the Nízke Tatry Mts in the middle of Slovakia, was the most significant producer of antimony (Sb) in the former Czechoslovakia. Mine drainage from adits (containing up to 9,300 μg/L of Sb), mine waste dumps, and the leachate from mine tailings contribute Sb and arsenic (As) into nearby Palud?anka Creek and groundwater. Some drinking water resources have been closed due to excessive Sb concentrations; the concentration of Sb in one household well (126 μg/L) far exceeds the Sb drinking water limit of 5 μg/L. Although Sb is attenuated by dilution and adsorption on ferric iron in stream sediment in the Palud?anka Creek, Sb concentrations increase downstream of the mine tailings and then remain almost constant, leading to concentrations of 128 μg/L at the northern boundary of the study area. The dissolved As concentrations in the mine drainage are much lower than Sb, ranging from 4 to 62 μg/L. Flow and transport modeling confirmed the observed contamination pattern and the major role of the mine adits. Results of this study indicate serious Sb contamination, which could be mitigated by treatment of the adit discharges.     

Hydrogen storage properties of MgH2‐diatomite composites obtained by high‐energy ball milling

To investigate the effects of specific porous microstructure of diatomite on the hydrogen storage properties of MgH₂, a two‐step preparation was carried out. The first step was decrepitation of MgH₂ particle size during 10 h of milling. The second step was additional 1 h of milling with diatomite. The microstructure and phase composition of materials was characterized by X‐ray diffraction, whereas the powder morphology and degree of additive dispersion were analyzed by scanning electron microscopy. The hydrogen desorption behaviour of nanocomposites was investigated by differential scanning calorimetry. The results show that addition of porous diatomite structure leads to decrease in desorption temperature, since there was no other effect that can have an influence on kinetics, such as formation of the metastable γ‐phase, reduction of oxides to the native metal and/or homogeneous dispersion of the catalyst. This indicates that the microstructure of added material plays the main role in the enhancement of desorption properties of composites.     

Fabrication of polycrystalline (Y0.7Gd0.3)2O3:Eu ceramics: The influence of initial pressure and sintering temperature on its morphology and photoluminescence activity

Nanocrystalline (Y_0.7Gd_0.3)₂O₃ powder, synthetised via polymer complex solution method, was compacted into 25 pellets applying high pressures (173-867 MPa) for 30 s that were subsequently sintered at different temperatures (800-1400 °C) for 18 h. The morphology and optical characteristics of the starting powder and prepared ceramic samples were monitored and discussed in order to identify the changes induced with the variations of initial compacting pressure, which influence is often neglected, and with sintering temperature. The grain size tends to decrease significantly with increasing pressure, even when elevated temperatures are used for annealing, while low compacting pressure resulted in grain coarsening and, in some cases, even in anomalous morphology of ceramic samples. Luminescence emission in ceramic samples decays faster than in nanopowders, that is in complete agreement with the grain formation and gradual transformation to the bulk material. Judd-Ofelt intensity parameters and branching ratios were calculated taking into account the difference in effective refractive index for nanopowder and ceramic samples.     

Fluctuations in the Levels of Antioxidant Compounds and Antioxidant Capacity of Ten Small Fruits During One Year of Frozen Storage

The fluctuations in antioxidant capacity (2,2-diphenyl-1-picrylhydrazyl, 2,2´-azinobis (3-ethylbenzthiazoline-6-sulphonic acid), and ferric reducing/antioxidant power assays), total phenol, total flavonoid, and total anthocyanin contents of 10 small fruits (sweet cherries, sour cherries, strawberries, red currants, raspberries, blackberries, hawthorn, cornelian cherries, and red and white grapes) were monitored during storage at ?20°C. After one year in storage, all varieties except hawthorn and white grapes retained equal or slightly greater total phenol content in comparison to the initial values. The total flavonoid and total anthocyanin levels also remained stable or even increased after 12 months in all fruits exept hawthorn and strawberries. Red currants and raspberries exhibited optimal preservation of antioxidant capacity, while hawthorn showed a decrease in the antioxidant capacity during different time points in storage as well as at the end of storage. Analyzed fruits were classified into four main groups based on hierarchical cluster analysis.     

The influence of Ce-based coatings as pretreatments on corrosion stability of top powder polyester coating on AA6060

Cerium-based conversion coatings (CeCCs) are one of the most prospective alternatives to the widely used chromate conversion coatings (CCCs) due to their anticorrosion efficiency, environmentally friendly nature and low cost. In this work, the CeCCs on AA6060 were prepared by immersion into aqueous cerium salt solutions at room temperature, and subsequently post-treated in heated phosphate solution. The effect of counter ion (nitrate and chloride) on the coating properties was studied testing CeCCs as sole or conversion layers for the top polyester coating. Since the 60 μm thick polyester coating was applied, an artificial defect of 0.8 mm hole was introduced to faster assess the differences between pretreatments. The system with CCC pretreatment was used as reference. Corrosion properties were investigated in 0.5 M NaCl solution by electrochemical impedance spectroscopy while the adhesion strength was measured by NMPR (N-methyl-2-pyrrolidone) and pull-off tests. As shown, the post-treated chloride-based CeCC offered better protection than crack-free thin nitrate-based CeCC, when used as sole coatings. On the other hand, it was brought to evidence that in combination with top powder polyester coating, the CeCC deposited from nitrate solution exhibited better protection compared to protective system pretreated with chloride-based one. Excellent polyester coating adhesion was found independently on aluminium surface pretreatment.     

THERMAL ANALYSIS OF LARGE OIL-IMMERSED TRANSFORMER WINDINGS

ABSTRACT

A method of numerical thermal analysis of large oil-immersed transformer windings is presented. The analysis consists of two steps: first, the leakage magnetic field is solved in the windings; second, the basic and additional losses distribution is calculated simultaneously with temperature rise distribution in the cross-sections of individual coils allowing for special geometries and cooling conditions of different types of windings. An example of the analysis is given and the values calculated are compared with the results of factory tests.     

An economic model for the appraisal and selection of energy supply system

Economic evaluation of different energy supply systems (district or local heating by natural gas) in Serbia is considered in this paper. According to variety of Serbian settlements (in density, size and layout of buildings) model which has ability to represent their different characteristics is formed. Model is based on identification of smaller urban areas with identical or similar characteristics and their representations with one of predefined nominal urban areas. For various nominal urban areas preferred type of energy supply system was selected. Obtained results formed matrix of preferred type of energy supply system (district or local heating) for different urban structures. This models’ matrix could be simple and useful tool for initial decision about energy supply system.     

Experimental investigation and thermodynamic prediction of the Bi–Sb–Zn phase diagram

Phase diagram of the ternary Bi–Sb–Zn system was investigated experimentally by DTA and SEM-EDS methods and analytically by CALPHAD method. The liquidus projection, invariant equilibria, several vertical sections and isothermal section at 300 °C were predicted using COST 531 thermodynamic database. Phase transition temperatures of alloys along three predicted vertical sections of the Bi–Sb–Zn ternary system with molar ratio Bi:Sb = 1, Bi:Zn = 1 and Sb:Zn = 1, were measured by differential thermal analysis (DTA). Predicted isothermal section at 300 °C was compared with the results of the scanning electron microscope (SEM) with energy dispersive spectrometry (EDS) analysis from this work.